S2EB-L2-48V

Specifications

Specifications table for model S2EB-L2-48V
Item	Performance characteristics
Operating Function	2 coil latching
Rated Coil Voltage	48 V DC
Rated Operating Power	355 mW
Contact Arrangement	2 Form A 2 Form B
Protective Construction	Sealed
Terminal Type	PC board terminal
Accessories	Sockets are available.
Packing Quantity; Inner Carton (Pcs.)	50
Packing Quantity; Outer Carton (Pcs.)	500
Rated Operating Current [±10%] (at 20°C)	Set coil: 7.4 mA Reset coil: 7.4 mA
Resistance [±10%] (at 20°C)	Set coil: 6,500 Ω Reset coil: 6,500 Ω
Max. Allowable Voltage	135% V of rated coil voltage (at 40℃)
Contact Shape	Twin
Contact Resistance (Initial)	Max. 50 mΩ (by voltage drop 6 V DC 1 A)
Contact Material	Double layer contact of AgNi-AgSnO₂ type + Au clad
Contact Rating (Resistive Load)	4 A 250 V AC, 3 A 30 V DC
Max. Switching Power (Resistive Load)	1,000 VA, 90 W
Max. Switching Voltage	250 V AC, 48 V DC
Max. Switching Current	4 A (AC), 3 A (DC) (30 to 48 V DC at less than 0.5 A)
Min. Switching Load (Reference Value)	100 μA 100 mV DC
Insulation Resistance (Initial)	Min. 10,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric Strength (Initial): Between Open Contacts	750 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact Sets	1,000 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact and Coil	1,500 Vrms for 1 min (detection current: 10 mA)
Hock Resistance (Functional)	490 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)
Hock Resistance (Destructive)	980 m/s² (half-sine shock pulse: 6 ms)
Vibration Resistance (Functional)	10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 μs)
Vibration Resistance (Destructive)	10 to 55 Hz (at double amplitude of 4 mm)
Mechanical Life	Min. 100x10⁶ ope. (switching frequency: at 50 cps)
Conditions	Ambient temperature: -55 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)
Weight (Typ.)	Approx. 8 g
Resistive Load	[switching frequency: 20 times/min] Min. 200x10³ ope. 3 A 30 V DC Min. 100x10³ ope. 4 A 250 V AC
Set Voltage	Max. 70% V of rated coil voltage (Initial)
Reset Voltage	Max. 70% V of rated coil voltage (Initial)
Time (Initial) (at 20°C 68°F) (Initial)	Max. 15 ms at rated coil voltage (without bounce)
Reset Time (Initial) (at20°C 68°F)	Max. 15 ms at rated coil voltage (without bounce, without diode)