Panasonic's CM Series is an automotive relay with a small size form factor of 20mm x 15mm x 22mm available in both PCB and Plug-in Type with Micro-ISO (International Organization for Standardization) terminals. This relay has both SPST (1FormA) and SPDT (1FormC) contact arrangements available. The CM Series has a high switching capacity of 35A @ 14VDC for the Normally Open contact and 20A @ 14VDC for the Normally Closed contact. Both sealed and flux-resistant construction types are available. A built-in resistor option is available for coil protection against EMF. Both 12V and 24V DC coils are available in this series.

Features and Benefits

  • Micro-ISO Type Terminals and Small Size
  • Wide Line-Up
  • Compact and High-Capacity Switching

Applications

  • Fan Motor
  • Heater
  • Head Lump
  • Air Compressor
  • ABS
  • Blower Fan
  • Defogger, etc.
Series image for CM Series Relays

CM Series Relays

Part number list

Results 24
Models table for series CM Series Relays
Part No.DatasheetProtective ConstructionTerminal TypeProtective ElementRated Coil VoltageContact ArrangementOperating Function Operate (Set) Voltage (at20°C) (Initial) Release (Reset) voltage (at20℃) (Initial)Rated Operating Current [±10%] (at 20°C)Coil Resistance (At 20oC)Rated Operating Power (at 20°C) Usable Voltage RangeContact Resistance (Initial)Contact MaterialNominal Switching Capacity (Resistive Load) Contact Data: Max. Carrying CurrentMin. Switching Load (Resistive) Contact Voltage Drop (After Electrical Life Test)Insulation Resistance (Min. MΩ)(Initial)Dielectric Strength (Between Open Contacts) (Initial)Dielectric Strength (Between Contacts and Coil) (Initial)Operate (Set) Time
(At Rated Coil Voltage) (At 20oC) (Initial)
Release (Reset) Time
(at Rated Coil Voltage) (at 20°C) (Initial)
Shock Resistance: Functional Shock Resistance: DestructiveVibration Resistance: FunctionalVibration Resistance: DestructiveExpected Life: Mechanical LifeExpected Life: ElectricalConditionsWeight (Typ.)Inner Carton (Pieces)Outer Carton (Pieces)
Sealed
PC board type
None
24V DC
1 Form A
Single side stable
6 to 14V DC
2.4 to 8.4V DC
75 mA
320Ω
1.8W
20 to 32V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 15A 28V DC
N.O. side: 15A 28V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.3 V (By voltage drop 15 A 28 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 104 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Flux tight
Plug-in type
With resistor inside
24V DC
1 Form A
Single side stable
6 to 14V DC
2.4 to 8.4V DC
83.6 mA
320Ω
2.0 W
20 to 32V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 15A 28V DC
N.O. side: 15A 28V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.3 V (By voltage drop 15 A 28 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 105 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Flux tight
Plug-in type
With resistor inside
12V DC
1 Form A
Single side stable
3 to 7V DC
1.2 to 4.2V DC
143 mA
96Ω
1.71 W
10 to 16V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 35A 14V DC
N.O. side: 20A 14V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.5 V (By voltage drop 35 A 14 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 105 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Sealed
Plug-in type
With resistor inside
24V DC
1 Form A
Single side stable
6 to 14V DC
2.4 to 8.4V DC
83.6 mA
320Ω
2.0 W
20 to 32V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 15A 28V DC
N.O. side: 15A 28V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.3 V (By voltage drop 15 A 28 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 104 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Sealed
Plug-in type
None
24V DC
1 Form A
Single side stable
6 to 14V DC
2.4 to 8.4V DC
75 mA
320Ω
1.8W
20 to 32V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 15A 28V DC
N.O. side: 15A 28V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.3 V (By voltage drop 15 A 28 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 104 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Flux tight
PC board type
None
24V DC
1 Form C
Single side stable
6 to 14V DC
2.4 to 8.4V DC
75 mA
320Ω
1.8W
20 to 32V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.3 V (By voltage drop 15 A 28 V DC)
N.C. side: Max. 0.2 V (By voltage drop 8 A 28 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 105 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Flux tight
Plug-in type
With resistor inside
24V DC
1 Form C
Single side stable
6 to 14V DC
2.4 to 8.4V DC
83.6 mA
320Ω
2.0 W
20 to 32V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.3 V (By voltage drop 15 A 28 V DC)
N.C. side: Max. 0.2 V (By voltage drop 8 A 28 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 105 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Sealed
PC board type
With resistor inside
24V DC
1 Form C
Single side stable
6 to 14V DC
2.4 to 8.4V DC
83.6 mA
320Ω
2.0 W
20 to 32V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.3 V (By voltage drop 15 A 28 V DC)
N.C. side: Max. 0.2 V (By voltage drop 8 A 28 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 104 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Sealed
Plug-in type
None
24V DC
1 Form C
Single side stable
6 to 14V DC
2.4 to 8.4V DC
75 mA
320Ω
1.8W
20 to 32V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.3 V (By voltage drop 15 A 28 V DC)
N.C. side: Max. 0.2 V (By voltage drop 8 A 28 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 104 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Flux tight
PC board type
With resistor inside
24V DC
1 Form C
Single side stable
6 to 14V DC
2.4 to 8.4V DC
83.6 mA
320Ω
2.0 W
20 to 32V DC
Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC
N.O. side: 15A 28V DC, N.C. side: 8A 28V DC (at 85°C 185°F, continuous)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.3 V (By voltage drop 15 A 28 V DC)
N.C. side: Max. 0.2 V (By voltage drop 8 A 28 V DC)
Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 200 m/s2 [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G]
10 to 2,000 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y, Z direction: 4 hours
Min. 106 (at 120 cpm)
Min. 105 (Operating frequency: 2s ON, 2s OFF)
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Approx. 20 g .71 oz
50
200
Latest Videos

Playlist

Thumbnail for New Product Brief: EV-A Series Automotive Relay

New Product Brief: EV-A Series Automotive Relay

Thumbnail for New Product Brief: TB Series Automotive Relays

New Product Brief: TB Series Automotive Relays

Thumbnail for Panasonic Automotive Solutions for Electrified Drivetrain

Panasonic Automotive Solutions for Electrified Drivetrain