Panasonic's CN-M Series is an Automotive Relay with 30A load switching capability designed for space-saving needed for use within a smart junction box that maintains a small size of 15.5mm length x 11.0mm width x 15.1mm height. This Relay is available with both SPST (1FormA) and SPDT (1FormC) contact arrangements and can be mounted in either PCB through-hole or surface mount terminals.
The CN-M Relay also has a high heat resistant type that can be used up to 110 Degree Celsius maximum ambient temperatures. The 12VDC coil for this relay has a guaranteed maximum set operation of 7.2VDC at room temperature.
Features and Benefits of CN-M Series Relays
Space Saving Most Suitable For Smart J/B
Compact And High Capacity 30A Load Switching
Terminals For PC Board Pattern Designs Are Easily Allocated
CN-M Series Relays- Applications
Headlamps
Fog Lamps
Fan Motors
Defoggers
Agricultural Equipment
CN-M Series Relays
Part number list
Results 8
Models table for series CN-M Series Relays
Part No.
Datasheet
Terminal Type
Rated Coil Voltage
Operate (Set) Voltage
Release (Reset) Voltage
Heat Resistance of Types
Contact Arrangement
Packing Quantity
Protective Construction
Operating Function
Operate (Set) Voltage (at20°C) (Initial)
Release (Reset) voltage (at20°C) (Initial)
Rated Operating Current [±10%] (at 20°C)
Coil Resistance (At 20oC)
Rated Operating Power (at 20°C)
Usable Voltage Range
Contact Resistance (Initial)
Contact Material
Nominal Switching Capacity (Resistive Load)
Contact Data: Max. Carrying Current
Min. Switching Load (Resistive)
Contact Voltage Drop (Initial)
Insulation Resistance (Min. MΩ)(Initial)
Dielectric Strength (Between Open Contacts) (Initial)
Dielectric Strength (Between Contacts and Coil) (Initial)
Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)
Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)
Tape and reel (Reverse N.O.side terminal direction in pull-out direction)
Sealed
Single side stable
Max. 7.2V DC
Min. 1.0V DC
53.3 mA
225Ω
640 mW
10 to 16V DC
Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O.side:30A 14V DC N.C.side:15A 14V DC
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
Max. 0.5 V (By voltage drop at 30 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Tape and reel (N.O.sidermal N.O.side terminal direction in pull-out direction)
Sealed
Single side stable
Max. 7.2V DC
Min. 1.0V DC
53.3 mA
225Ω
640 mW
10 to 16V DC
Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
30A 14V DC
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
Max. 0.5 V (By voltage drop at 30 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
Tape and reel (Reverse N.O.side terminal direction in pull-out direction)
Sealed
Single side stable
Max. 7.2V DC
Min. 1.0V DC
53.3 mA
225Ω
640 mW
10 to 16V DC
Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
30A 14V DC
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
Max. 0.5 V (By voltage drop at 30 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
Tape and reel (N.O.sidermal N.O.side terminal direction in pull-out direction)
Sealed
Single side stable
Max. 7.2V DC
Min. 1.0V DC
53.3 mA
225Ω
640 mW
10 to 16V DC
Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O.side:30A 14V DC N.C.side:15A 14V DC
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
Approx. 5.5 g .19 oz
50
1,500
Models table for series CN-M Series Relays
Part No.
Datasheet
Terminal Type
Rated Coil Voltage
Operate (Set) Voltage
Release (Reset) Voltage
Heat Resistance of Types
Contact Arrangement
Packing Quantity
Protective Construction
Operating Function
Operate (Set) Voltage (at20°C) (Initial)
Release (Reset) voltage (at20°C) (Initial)
Rated Operating Current [±10%] (at 20°C)
Coil Resistance (At 20oC)
Rated Operating Power (at 20°C)
Usable Voltage Range
Contact Resistance (Initial)
Contact Material
Nominal Switching Capacity (Resistive Load)
Contact Data: Max. Carrying Current
Min. Switching Load (Resistive)
Contact Voltage Drop (Initial)
Insulation Resistance (Min. MΩ)(Initial)
Dielectric Strength (Between Open Contacts) (Initial)
Dielectric Strength (Between Contacts and Coil) (Initial)
Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)
Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)
Tape and reel (Reverse N.O.side terminal direction in pull-out direction)
Sealed
Single side stable
Max. 7.2V DC
Min. 1.0V DC
53.3 mA
225Ω
640 mW
10 to 16V DC
Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O.side:30A 14V DC N.C.side:15A 14V DC
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
Max. 0.5 V (By voltage drop at 30 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
Tape and reel (N.O.sidermal N.O.side terminal direction in pull-out direction)
Sealed
Single side stable
Max. 7.2V DC
Min. 1.0V DC
53.3 mA
225Ω
640 mW
10 to 16V DC
Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
30A 14V DC
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
Max. 0.5 V (By voltage drop at 30 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
Tape and reel (Reverse N.O.side terminal direction in pull-out direction)
Sealed
Single side stable
Max. 7.2V DC
Min. 1.0V DC
53.3 mA
225Ω
640 mW
10 to 16V DC
Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
30A 14V DC
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
Max. 0.5 V (By voltage drop at 30 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
Tape and reel (N.O.sidermal N.O.side terminal direction in pull-out direction)
Sealed
Single side stable
Max. 7.2V DC
Min. 1.0V DC
53.3 mA
225Ω
640 mW
10 to 16V DC
Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O.side:30A 14V DC N.C.side:15A 14V DC
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)
30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F)
1A 14V DC (at 20°C 68°F)
N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)
Min. 107 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
