TC Series Relays

Part number list

Results 54

Models table for series TC Series Relays
Part No.	Protective Construction	Operating Function	Rated Coil Voltage	Coil Resistance (at 20oC)	Heat Resistance of Types	Contact Arrangement	Contact Type	Terminal Type	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Electrical	Conditions	Expected Life: Mechanical Life	Weight (Typ.)	Packing Quantity	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTC1CH2	Sealed	Single side stable	12V DC	160Ω	High heat-resistant type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Max. 7.0V DC	Min. 0.5V DC	75 mA	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC1CH1	Sealed	Single side stable	12V DC	110Ω	High heat-resistant type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC11	Sealed	Single side stable	12V DC	110Ω	Standard type	1 Form A	Standard type	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC1H1	Sealed	Single side stable	12V DC	110Ω	High heat-resistant type	1 Form A	Standard type	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC1C3	Sealed	Single side stable	12V DC	225Ω	Standard type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Max. 7.5V DC	Min. 0.5V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC32	Sealed	Single side stable	12V DC	160Ω	Standard type	Double make contact 2 Form A (1 Form U)	Standard type	PC board type	Max. 7.0V DC	Min. 0.5V DC	75 mA	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC3R1	Flux tight	Single side stable	12V DC	110Ω	Pin in Paste compliant type	Double make contact 2 Form A (1 Form U)	Standard type	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC2R1	Flux tight	Single side stable	12V DC	110Ω	Pin in Paste compliant type	1 Form C	Standard type	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC3H2	Sealed	Single side stable	12V DC	160Ω	High heat-resistant type	Double make contact 2 Form A (1 Form U)	Standard type	PC board type	Max. 7.0V DC	Min. 0.5V DC	75 mA	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC3CH2	Sealed	Single side stable	12V DC	160Ω	High heat-resistant type	Double make contact 2 Form A (1 Form U)	Standard type (Ag alloy / Cu clad)	PC board type	Max. 7.0V DC	Min. 0.5V DC	75 mA	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800

Models table for series TC Series Relays
Part No.	Protective Construction	Operating Function	Rated Coil Voltage	Coil Resistance (at 20oC)	Heat Resistance of Types	Contact Arrangement	Contact Type	Terminal Type	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Electrical	Conditions	Expected Life: Mechanical Life	Weight (Typ.)	Packing Quantity	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTC1CH2	Sealed	Single side stable	12V DC	160Ω	High heat-resistant type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Max. 7.0V DC	Min. 0.5V DC	75 mA	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC1CH1	Sealed	Single side stable	12V DC	110Ω	High heat-resistant type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC11	Sealed	Single side stable	12V DC	110Ω	Standard type	1 Form A	Standard type	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC1H1	Sealed	Single side stable	12V DC	110Ω	High heat-resistant type	1 Form A	Standard type	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC1C3	Sealed	Single side stable	12V DC	225Ω	Standard type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Max. 7.5V DC	Min. 0.5V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC32	Sealed	Single side stable	12V DC	160Ω	Standard type	Double make contact 2 Form A (1 Form U)	Standard type	PC board type	Max. 7.0V DC	Min. 0.5V DC	75 mA	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC3R1	Flux tight	Single side stable	12V DC	110Ω	Pin in Paste compliant type	Double make contact 2 Form A (1 Form U)	Standard type	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC2R1	Flux tight	Single side stable	12V DC	110Ω	Pin in Paste compliant type	1 Form C	Standard type	PC board type	Max. 6.5V DC	Min. 0.5V DC	109 mA	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC3H2	Sealed	Single side stable	12V DC	160Ω	High heat-resistant type	Double make contact 2 Form A (1 Form U)	Standard type	PC board type	Max. 7.0V DC	Min. 0.5V DC	75 mA	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800
ACTC3CH2	Sealed	Single side stable	12V DC	160Ω	High heat-resistant type	Double make contact 2 Form A (1 Form U)	Standard type (Ag alloy / Cu clad)	PC board type	Max. 7.0V DC	Min. 0.5V DC	75 mA	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A for 1hour (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10⁵ at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Min. 10⁷ (at 120 cpm)	Approx. 10 g .35 oz	Tube	40	800