| | Sealed | 110Ω | High heat-resistant type | 1 Form C | Standard type | PC board type | Single side stable | 12V DC | Max. 5.5V DC | 110Ω | 1,309 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | Tube | 50 | 2,000 |
| | Flux tight | 220Ω | Pin in Paste compliant type | 1 Form C | Standard type (Ag alloy / Cu clad) | PC board type | Single side stable | 12V DC | Max. 7.7V DC | 220Ω | 655 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | Tube | 50 | 2,000 |
| | Flux tight | 160Ω | Pin in Paste compliant type | 1 Form C | Standard type (Ag alloy / Cu clad) | PC board type | Single side stable | 12V DC | Max. 6.5V DC | 160Ω | 900 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | Tube | 50 | 2,000 |
| | Sealed | 160Ω | High heat-resistant type | 1 Form C | Standard type | PC board type | Single side stable | 12V DC | Max. 6.5V DC | 160Ω | 900 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | Tube | 50 | 2,000 |
| | Sealed | 160Ω | High heat-resistant type | 1 Form C | Standard type (Ag alloy / Cu clad) | PC board type | Single side stable | 12V DC | Max. 6.5V DC | 160Ω | 900 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | Tube | 50 | 2,000 |
| | Flux tight | 160Ω | Pin in Paste compliant type | 1 Form C | Standard type | PC board type | Single side stable | 12V DC | Max. 6.5V DC | 160Ω | 900 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | Tube | 50 | 2,000 |
| | Flux tight | 110Ω | Pin in Paste compliant type | 1 Form C | Standard type | PC board type | Single side stable | 12V DC | Max. 5.5V DC | 110Ω | 1,309 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | Tube | 50 | 2,000 |
| | Sealed | 220Ω | High heat-resistant type | 1 Form C x 2 (8 pins) | Standard type (Ag alloy / Cu clad) | PC board type | Single side stable | 12V DC | Max. 7.7V DC | 220Ω | 655 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 6.5 g .23 oz | Tube | 40 | 2,000 |
| | Sealed | 220Ω | High heat-resistant type | 1 Form C | Standard type | PC board type | Single side stable | 12V DC | Max. 7.7V DC | 220Ω | 655 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | Tube | 50 | 2,000 |
| | Sealed | 110Ω | High heat-resistant type | 1 Form C x 2 (8 pins) | Standard type | PC board type | Single side stable | 12V DC | Max. 5.5V DC | 110Ω | 1,309 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | 1A 14V DC (at 20°C 68°F) | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 6.5 g .23 oz | Tube | 40 | 2,000 |