TG Series Relays

Part number list

Results 8

Models table for series TG Series Relays
Part No.	Protective Construction	Rated Coil Voltage	Coil Resistance (at 20oC)	Heat Resistance of Types	Contact Arrangement	Contact Type	Terminal Type	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Packing Quantity	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTG1H4	Sealed	12V DC	320Ω	High heat-resistant type	1 Form A	Standard type	PC board type	Single side stable	Max. 7.0V DC	Min. 0.8V DC	37.5mA	320Ω	450 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG1CH3	Sealed	12V DC	225Ω	High heat-resistant type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG2H3	Sealed	12V DC	225Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG1H3	Sealed	12V DC	225Ω	High heat-resistant type	1 Form A	Standard type	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG2CH4	Sealed	12V DC	320Ω	High heat-resistant type	1 Form C	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	Max. 7.0V DC	Min. 0.8V DC	37.5mA	320Ω	450 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG1CH4	Sealed	12V DC	320Ω	High heat-resistant type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	Max. 7.0V DC	Min. 0.8V DC	37.5mA	320Ω	450 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG2CH3	Sealed	12V DC	225Ω	High heat-resistant type	1 Form C	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG2H4	Sealed	12V DC	320Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	Max. 7.0V DC	Min. 0.8V DC	37.5mA	320Ω	450 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800

Models table for series TG Series Relays
Part No.	Protective Construction	Rated Coil Voltage	Coil Resistance (at 20oC)	Heat Resistance of Types	Contact Arrangement	Contact Type	Terminal Type	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Packing Quantity	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTG1H4	Sealed	12V DC	320Ω	High heat-resistant type	1 Form A	Standard type	PC board type	Single side stable	Max. 7.0V DC	Min. 0.8V DC	37.5mA	320Ω	450 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG1CH3	Sealed	12V DC	225Ω	High heat-resistant type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG2H3	Sealed	12V DC	225Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG1H3	Sealed	12V DC	225Ω	High heat-resistant type	1 Form A	Standard type	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG2CH4	Sealed	12V DC	320Ω	High heat-resistant type	1 Form C	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	Max. 7.0V DC	Min. 0.8V DC	37.5mA	320Ω	450 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG1CH4	Sealed	12V DC	320Ω	High heat-resistant type	1 Form A	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	Max. 7.0V DC	Min. 0.8V DC	37.5mA	320Ω	450 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	30A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG2CH3	Sealed	12V DC	225Ω	High heat-resistant type	1 Form C	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800
ACTG2H4	Sealed	12V DC	320Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	Max. 7.0V DC	Min. 0.8V DC	37.5mA	320Ω	450 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 30A 14V DC, N.C. side: 15A 14V DC	35A/ 1 hour (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 30A 14V DC at motor lock condition Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 18 x 10⁴ at inrush 84A, steady 12A 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH (Avoid icing and condensation)	Approx. 12 g	Tube	40	800