Series image for TM Series Relays

TM Series Relays

Part number list

Results 3
Models table for series TM Series Relays
Part No.DatasheetCoil Resistance (at 20oC)Heat Resistance of TypesContact ArrangementContact TypeProtective ConstructionTerminal TypeOperating Function Rated Coil VoltageOperate (Set) Voltage (at20°C) (Initial) Release (Reset) voltage (at20℃) (Initial)Rated Operating Current [±10%] (at 20°C)Coil Resistance (At 20oC)Rated Operating Power (at 20°C) Usable Voltage RangeContact Resistance (Initial)Contact MaterialNominal Switching Capacity (Resistive Load) Contact Data: Max. Carrying CurrentMin. Switching Load (Resistive) Insulation Resistance (Min. MΩ)(Initial)Dielectric Strength (Between Open Contacts) (Initial)Dielectric Strength (Between Contacts and Coil) (Initial)Operate (Set) Time
(At Rated Coil Voltage) (At 20oC) (Initial)
Release (Reset) Time
(at Rated Coil Voltage) (at 20°C) (Initial)
Shock Resistance: Functional Shock Resistance: DestructiveVibration Resistance: FunctionalVibration Resistance: DestructiveExpected Life: Mechanical LifeExpected Life: ElectricalConditionsWeight (Typ.)Inner Carton (Pieces)Outer Carton (Pieces)
400 Ω
High heat-resistant type
1 Form A
Standard type (Ag alloy / Cu clad)
Sealed
PC board type
Single side stable
12V DC
Max. 7.0V DC
Min. 0.5V DC
30 mA
400 Ω
360mW
10 to 16V DC
Max. 50m&Omega (N.O. side: typ. 1.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
35A 14V DC
40A/ 1 hour (Coil applied voltage 12V DC at 20℃)
1A 14V DC (at 20℃)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1min (Detection current: 10mA)
500 Vrms for 1min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 100 m/s2
(Half-wave pulse of sine wave: 11 ms; detection time: 10μs)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
10 to 100 Hz, Min. 44.1m/s2 (Detection time: 10μs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load] Min. 105 at rated switching capacity
Operating frequency: 1s ON, 9s OFF
Ambient temperature: –40 to +110℃, Humidity: 2 to 85% RH (Avoid icing and condensation)
Approx. 11.6 g
50
2,000
320 Ω
High heat-resistant type
1 Form C
Standard type (Ag alloy / Cu clad)
Sealed
PC board type
Single side stable
12V DC
Max. 7.0V DC
Min. 0.5V DC
37.5 mA
320 Ω
450mW
10 to 16V DC
Max. 50m&Omega (N.O. side: typ. 1.5mΩ, N.C. side: typ. 3mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 35A 14V DC, N.C. side: 15A 14V DC
40A/ 1 hour (Coil applied voltage 12V DC at 20℃)
1A 14V DC (at 20℃)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1min (Detection current: 10mA)
500 Vrms for 1min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 100 m/s2
(Half-wave pulse of sine wave: 11 ms; detection time: 10μs)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
10 to 100 Hz, Min. 44.1m/s2 (Detection time: 10μs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load] Min. 105 at rated switching capacity
Operating frequency: 1s ON, 9s OFF
Ambient temperature: –40 to +110℃, Humidity: 2 to 85% RH (Avoid icing and condensation)
Approx. 11.6 g
50
2,000
320 Ω
High heat-resistant type
1 Form A
Standard type (Ag alloy / Cu clad)
Sealed
PC board type
Single side stable
12V DC
Max. 7.0V DC
Min. 0.5V DC
37.5 mA
320 Ω
450mW
10 to 16V DC
Max. 50m&Omega (N.O. side: typ. 1.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
35A 14V DC
40A/ 1 hour (Coil applied voltage 12V DC at 20℃)
1A 14V DC (at 20℃)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1min (Detection current: 10mA)
500 Vrms for 1min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 100 m/s2
(Half-wave pulse of sine wave: 11 ms; detection time: 10μs)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
10 to 100 Hz, Min. 44.1m/s2 (Detection time: 10μs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load] Min. 105 at rated switching capacity
Operating frequency: 1s ON, 9s OFF
Ambient temperature: –40 to +110℃, Humidity: 2 to 85% RH (Avoid icing and condensation)
Approx. 11.6 g
50
2,000
Latest Videos

Playlist

Thumbnail for New Product Brief: EV-A Series Automotive Relay

New Product Brief: EV-A Series Automotive Relay

Thumbnail for New Product Brief: TB Series Automotive Relays

New Product Brief: TB Series Automotive Relays

Thumbnail for Panasonic Automotive Solutions for Electrified Drivetrain

Panasonic Automotive Solutions for Electrified Drivetrain