DW Series Relays

Panasonic's DW Series Polarized Power Relays feature up to 16A @ 277 VAC switching capacity in the same compact size. In addition to the DW Series lineup is the high inrush type that offers up to a 100A inrush capability with a 600W nominal operating power. The DW Series is available in 1 and 2 coil latching configurations.
 
Features:

  • Latching Relay- Ideal for Energy Saving Devices
  • IEC60335-1 Compliant, PTI325V (VDE Approved) Type Available
  • Surge Breakdown Voltage (Between Contact and Coil): 12,000 V
  • Breakdown Voltage (Between Contact and Coil): 5,000 V
  • Pin-In-Paste Construction Makes Reflow Possible

Benefits:

  • Can Run at High Operating Power
  • Robust Under Stressful Operating Conditions
  • High Reliability
Series image for DW Series Relays

DW Series Relays

Part number list

Results 48
Models table for series DW Series Relays
Part No.DatasheetOperating Function Contact TypeType ClassificationRated Coil VoltageProtective ConstructionTerminal TypePacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Set Voltage Reset VoltageRated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage (at 20°C 68°F)Contact ArrangementContact ShapeContact Resistance (Initial)Contact MaterialContact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilTime (Initial) (at 20°C 68°F) (Initial) Reset Time (Initial) (at20°C 68°F) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)Mechanical LifeConditionsWeight (Typ.)Resistive LoadInrush Load; TungstenPacking Quantity
ADW1106HLW
1 coil latching
Inrush type (16A, Inrush current 100A)
Low profile type
6 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
33.3 mA
180 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 277 V AC
4,432 VA
277 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70℃ (Over 8A to 16A)
Ambient temperature: -40 to +85℃ (8A or less)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 7.5 g
Min. 50x103 ope. 8 A 250 V AC (switching frequency: 20 times/min)
Min. 20x103 ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s)
Min. 25x103 ope.
Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s)
Carton
ADW1105HTW
1 coil latching
Inrush type (16A, Inrush current 100A)
IEC60335-1compliant type
5 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
40 mA
125 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 277 V AC
4,432 VA
277 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70℃ (Over 8A to 16A)
Ambient temperature: -40 to +85℃ (8A or less)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 8 g
Min. 50x103 ope. 8 A 250 V AC (switching frequency: 20 times/min)
Min. 20x103 ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s)
Min. 25x103 ope.
Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s)
Carton
ADW1106HTW
1 coil latching
Inrush type (16A, Inrush current 100A)
IEC60335-1compliant type
6 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
33.3 mA
180 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 277 V AC
4,432 VA
277 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70℃ (Over 8A to 16A)
Ambient temperature: -40 to +85℃ (8A or less)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 8 g
Min. 50x103 ope. 8 A 250 V AC (switching frequency: 20 times/min)
Min. 20x103 ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s)
Min. 25x103 ope.
Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s)
Carton
ADW1106TW
1 coil latching
Standard type (8A)
IEC60335-1compliant type
6 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
33.3 mA
180 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
8 A 250 V AC
2,000 VA
250 V AC
8 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 8 g
[switching frequency: 20 times/min]
Min. 50x103 ope. 8 A 250 V AC
Min. 100x103 ope. 5 A 250 V AC
Carton
ADW1103W
1 coil latching
Standard type (8A)
Reflow compatible type
3 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
66.7 mA
45 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
8 A 250 V AC
2,000 VA
250 V AC
8 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 8 g
[switching frequency: 20 times/min]
Min. 50x103 ope. 8 A 250 V AC
Carton
ADW1109HLW
1 coil latching
Inrush type (16A, Inrush current 100A)
Low profile type
9 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
22.2 mA
405 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 277 V AC
4,432 VA
277 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70℃ (Over 8A to 16A)
Ambient temperature: -40 to +85℃ (8A or less)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 7.5 g
Min. 50x103 ope. 8 A 250 V AC (switching frequency: 20 times/min)
Min. 20x103 ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s)
Min. 25x103 ope.
Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s)
Carton
ADW1124HTW
1 coil latching
Inrush type (16A, Inrush current 100A)
IEC60335-1compliant type
24 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
8.3 mA
2,880 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 277 V AC
4,432 VA
277 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70℃ (Over 8A to 16A)
Ambient temperature: -40 to +85℃ (8A or less)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 8 g
Min. 50x103 ope. 8 A 250 V AC (switching frequency: 20 times/min)
Min. 20x103 ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s)
Min. 25x103 ope.
Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s)
Carton
ADW1112HTW
1 coil latching
Inrush type (16A, Inrush current 100A)
IEC60335-1compliant type
12 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
16.7 mA
720 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 277 V AC
4,432 VA
277 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70℃ (Over 8A to 16A)
Ambient temperature: -40 to +85℃ (8A or less)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 8 g
Min. 50x103 ope. 8 A 250 V AC (switching frequency: 20 times/min)
Min. 20x103 ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s)
Min. 25x103 ope.
Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s)
Carton
ADW1109TW
1 coil latching
Standard type (8A)
IEC60335-1compliant type
9 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
22.2 mA
405 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
8 A 250 V AC
2,000 VA
250 V AC
8 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 8 g
[switching frequency: 20 times/min]
Min. 50x103 ope. 8 A 250 V AC
Min. 100x103 ope. 5 A 250 V AC
Carton
ADW1112TW
1 coil latching
Standard type (8A)
IEC60335-1compliant type
12 V DC
Flux-resistant
PC board terminal
100
500
Max. 80% V of rated coil voltage (Initial)
Max. 80% V of rated coil voltage (Initial)
16.7 mA
720 Ω
200 mW
110% V of rated coil voltage
1 Form A
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
8 A 250 V AC
2,000 VA
250 V AC
8 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
12,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 15 ms at rated coil voltage (without bounce)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 8 g
[switching frequency: 20 times/min]
Min. 50x103 ope. 8 A 250 V AC
Min. 100x103 ope. 5 A 250 V AC
Carton
What's New

Stay up to date

View All
HE-A Series General Power Relays
Jun 18, 2024

HE-A Series General Power Relays

Relays & Contactors
LQ Series General Power Relay - High Inrush Type
Jun 18, 2024

LQ Series General Power Relay - High Inrush Type

Relays & Contactors
DS-P Series General Power Relays
Oct 19, 2023

DS-P Series General Power Relays

Relays & Contactors
HE Series Power Relay PV Type 90A Wide Gap
May 31, 2023

HE Series Power Relay PV Type 90A Wide Gap

Relays & Contactors
HE-R Series General Power Relays
Apr 13, 2023

HE-R Series General Power Relays

Relays & Contactors
LD-P Series General Power Relays
Jan 12, 2021

LD-P Series General Power Relays

Relays & Contactors
LQ Series Non-Polarized General Power Relays
Oct 3, 2019

LQ Series Non-Polarized General Power Relays

Relays & Contactors
HE-N Series General Power Relays
Aug 31, 2018

HE-N Series General Power Relays

Relays & Contactors
LZ-N Series General Power Relays
Jun 22, 2018

LZ-N Series General Power Relays

Relays & Contactors
DJ-H Series Power Latching Relays
Oct 31, 2017

DJ-H Series Power Latching Relays

Relays & Contactors
Latest Videos

Playlist

Thumbnail for Panasonic Industrial Solutions for 5G Networking Applications

Panasonic Industrial Solutions for 5G Networking Applications

Thumbnail for New Product Spotlight: DW Series Relays

New Product Spotlight: DW Series Relays

Thumbnail for New Product Spotlight: PA-N Series General Power Relays

New Product Spotlight: PA-N Series General Power Relays

Thumbnail for New Product Introduction: HE-R Series General Power Relays

New Product Introduction: HE-R Series General Power Relays

Thumbnail for New Product Introduction: HE Series Power Relay PV Type 90A Wide Gap

New Product Introduction: HE Series Power Relay PV Type 90A Wide Gap

Thumbnail for New Product Introduction: DS-P Series

New Product Introduction: DS-P Series

Thumbnail for New Product Information: LQ Series Relays

New Product Information: LQ Series Relays

Thumbnail for New Product Introduction: HE-A Series Relays

New Product Introduction: HE-A Series Relays