| | Class B insulation | 5 V DC | 1 Form C | Sealed | Single side stable | PC board terminal | Slim type | 100 | 500 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 80.0 mA | 62.5 Ω | 400 mW | 110% V of rated coil voltage (at 85°C) 150% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | N.O.: 10 A 125 V AC, 5 A 250 V AC, 5 A 30 V DC N.C.: 3 A 125 V AC, 2 A 250 V AC, 1 A 30 V DC | N.O.: 1,250 VA, 150 W N.C.: 500 VA, 30 W | 250 V AC, 30 V DC | N.O.: 10 A (125 V AC), 5 A (30 V DC) N.C.: 3 A (125 V AC), 1 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] N.O.: Min. 100x103 ope. 5 A 30 V DC N.O.: Min. 50x103 ope. 10 A 125 V AC N.O.: Min. 50x103 ope. 5 A 250 V AC N.C.: Min. 200x103 ope. 3 A 125 V AC N.C.: Min. 200x103 ope. 2 A 250 V AC N.C.: Min. 100x103 ope. 1 A 30 V DC | Carton |
| | Class B insulation | 9 V DC | 1 Form C | Sealed | Single side stable | PC board terminal | Slim type | 100 | 500 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 44.4 mA | 202.5 Ω | 400 mW | 110% V of rated coil voltage (at 85°C) 150% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | N.O.: 10 A 125 V AC, 5 A 250 V AC, 5 A 30 V DC N.C.: 3 A 125 V AC, 2 A 250 V AC, 1 A 30 V DC | N.O.: 1,250 VA, 150 W N.C.: 500 VA, 30 W | 250 V AC, 30 V DC | N.O.: 10 A (125 V AC), 5 A (30 V DC) N.C.: 3 A (125 V AC), 1 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] N.O.: Min. 100x103 ope. 5 A 30 V DC N.O.: Min. 50x103 ope. 10 A 125 V AC N.O.: Min. 50x103 ope. 5 A 250 V AC N.C.: Min. 200x103 ope. 3 A 125 V AC N.C.: Min. 200x103 ope. 2 A 250 V AC N.C.: Min. 100x103 ope. 1 A 30 V DC | Carton |
| | Class B insulation | 18 V DC | 1 Form C | Sealed | Single side stable | PC board terminal | Slim type | 100 | 500 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 22.2 mA | 810 Ω | 400 mW | 110% V of rated coil voltage (at 85°C) 150% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | N.O.: 10 A 125 V AC, 5 A 250 V AC, 5 A 30 V DC N.C.: 3 A 125 V AC, 2 A 250 V AC, 1 A 30 V DC | N.O.: 1,250 VA, 150 W N.C.: 500 VA, 30 W | 250 V AC, 30 V DC | N.O.: 10 A (125 V AC), 5 A (30 V DC) N.C.: 3 A (125 V AC), 1 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] N.O.: Min. 100x103 ope. 5 A 30 V DC N.O.: Min. 50x103 ope. 10 A 125 V AC N.O.: Min. 50x103 ope. 5 A 250 V AC N.C.: Min. 200x103 ope. 3 A 125 V AC N.C.: Min. 200x103 ope. 2 A 250 V AC N.C.: Min. 100x103 ope. 1 A 30 V DC | Carton |
| | Class F insulation | 5 V DC | 1 Form C | Sealed | Single side stable | PC board terminal | Slim type | 100 | 500 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 80.0 mA | 62.5 Ω | 400 mW | 110% V of rated coil voltage (at 85°C) 150% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | N.O.: 10 A 125 V AC, 5 A 250 V AC, 5 A 30 V DC N.C.: 3 A 125 V AC, 2 A 250 V AC, 1 A 30 V DC | N.O.: 1,250 VA, 150 W N.C.: 500 VA, 30 W | 250 V AC, 30 V DC | N.O.: 10 A (125 V AC), 5 A (30 V DC) N.C.: 3 A (125 V AC), 1 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] N.O.: Min. 100x103 ope. 5 A 30 V DC N.O.: Min. 50x103 ope. 10 A 125 V AC N.O.: Min. 50x103 ope. 5 A 250 V AC N.C.: Min. 200x103 ope. 3 A 125 V AC N.C.: Min. 200x103 ope. 2 A 250 V AC N.C.: Min. 100x103 ope. 1 A 30 V DC | Carton |
| | Class F insulation | 9 V DC | 1 Form C | Sealed | Single side stable | PC board terminal | Slim type | 100 | 500 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 44.4 mA | 202.5 Ω | 400 mW | 110% V of rated coil voltage (at 85°C) 150% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | N.O.: 10 A 125 V AC, 5 A 250 V AC, 5 A 30 V DC N.C.: 3 A 125 V AC, 2 A 250 V AC, 1 A 30 V DC | N.O.: 1,250 VA, 150 W N.C.: 500 VA, 30 W | 250 V AC, 30 V DC | N.O.: 10 A (125 V AC), 5 A (30 V DC) N.C.: 3 A (125 V AC), 1 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] N.O.: Min. 100x103 ope. 5 A 30 V DC N.O.: Min. 50x103 ope. 10 A 125 V AC N.O.: Min. 50x103 ope. 5 A 250 V AC N.C.: Min. 200x103 ope. 3 A 125 V AC N.C.: Min. 200x103 ope. 2 A 250 V AC N.C.: Min. 100x103 ope. 1 A 30 V DC | Carton |
| | Class B insulation | 5 V DC | 1 Form C | Sealed | Single side stable | PC board terminal | Slim type | 50 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 80.0 mA | 62.5 Ω | 400 mW | 110% V of rated coil voltage (at 85°C) 150% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | N.O.: 10 A 125 V AC, 5 A 250 V AC, 5 A 30 V DC N.C.: 3 A 125 V AC, 2 A 250 V AC, 1 A 30 V DC | N.O.: 1,250 VA, 150 W N.C.: 500 VA, 30 W | 250 V AC, 30 V DC | N.O.: 10 A (125 V AC), 5 A (30 V DC) N.C.: 3 A (125 V AC), 1 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] N.O.: Min. 100x103 ope. 5 A 30 V DC N.O.: Min. 50x103 ope. 10 A 125 V AC N.O.: Min. 50x103 ope. 5 A 250 V AC N.C.: Min. 200x103 ope. 3 A 125 V AC N.C.: Min. 200x103 ope. 2 A 250 V AC N.C.: Min. 100x103 ope. 1 A 30 V DC | Tube package |
| | Class F insulation | 9 V DC | 1 Form C | Sealed | Single side stable | PC board terminal | Slim type | 50 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 44.4 mA | 202.5 Ω | 400 mW | 110% V of rated coil voltage (at 85°C) 150% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | N.O.: 10 A 125 V AC, 5 A 250 V AC, 5 A 30 V DC N.C.: 3 A 125 V AC, 2 A 250 V AC, 1 A 30 V DC | N.O.: 1,250 VA, 150 W N.C.: 500 VA, 30 W | 250 V AC, 30 V DC | N.O.: 10 A (125 V AC), 5 A (30 V DC) N.C.: 3 A (125 V AC), 1 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] N.O.: Min. 100x103 ope. 5 A 30 V DC N.O.: Min. 50x103 ope. 10 A 125 V AC N.O.: Min. 50x103 ope. 5 A 250 V AC N.C.: Min. 200x103 ope. 3 A 125 V AC N.C.: Min. 200x103 ope. 2 A 250 V AC N.C.: Min. 100x103 ope. 1 A 30 V DC | Tube package |
| | Class B insulation | 18 V DC | 1 Form C | Sealed | Single side stable | PC board terminal | Slim type | 50 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 22.2 mA | 810 Ω | 400 mW | 110% V of rated coil voltage (at 85°C) 150% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | N.O.: 10 A 125 V AC, 5 A 250 V AC, 5 A 30 V DC N.C.: 3 A 125 V AC, 2 A 250 V AC, 1 A 30 V DC | N.O.: 1,250 VA, 150 W N.C.: 500 VA, 30 W | 250 V AC, 30 V DC | N.O.: 10 A (125 V AC), 5 A (30 V DC) N.C.: 3 A (125 V AC), 1 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] N.O.: Min. 100x103 ope. 5 A 30 V DC N.O.: Min. 50x103 ope. 10 A 125 V AC N.O.: Min. 50x103 ope. 5 A 250 V AC N.C.: Min. 200x103 ope. 3 A 125 V AC N.C.: Min. 200x103 ope. 2 A 250 V AC N.C.: Min. 100x103 ope. 1 A 30 V DC | Tube package |
| | Class B insulation | 18 V DC | 1 Form A | Sealed | Single side stable | PC board terminal | Slim type | 50 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 11.1 mA | 1,620 Ω | 200 mW | 130% V of rated coil voltage (at 85°C) 180% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | 5 A 30 V DC, 10 A 125 V AC, 5 A 250 V AC | 1,250 VA, 150 W | 250 V AC, 30 V DC | 10 A (125 V AC), 5 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 294 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] Min. 100x103 ope. 5 A 30 V DC Min. 50x103 ope. 10 A 125 V AC Min. 50x103 ope. 5 A 250 V AC | Tube package |
| | Class B insulation | 24 V DC | 1 Form A | Sealed | Single side stable | PC board terminal | Slim type | 100 | 500 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 8.3 mA | 2,880 Ω | 200 mW | 130% V of rated coil voltage (at 85°C) 180% V of rated coil voltage (at 20°C) | Single | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgNi type | 5 A 30 V DC, 10 A 125 V AC, 5 A 250 V AC | 1,250 VA, 150 W | 250 V AC, 30 V DC | 10 A (125 V AC), 5 A (30 V DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 8,000 V | Max. 20 ms at rated coil voltage (without bounce) | 294 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | Max. 20 ms at rated coil voltage (without bounce, with diode) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 10x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7 g | [at 20°C, switching frequency: at 20 times/min, with diode] Min. 100x103 ope. 5 A 30 V DC Min. 50x103 ope. 10 A 125 V AC Min. 50x103 ope. 5 A 250 V AC | Carton |