CA Series Relays

Panasonic's CA Series Relay is a small-sized and lightweight Automotive Relay available in either SPST-NO (1FormA), SPST-NC (1FormB), or SPDT (1FormC) contact arrangements. For space-saving, the outside dimensions of the main body are reduced to 21.5mm (length) x 14.4mm (width) x 37mm (height).

In addition, since the terminal arrangement complies with JIS D5011 B4-M1, commercial connectors are available for easy mounting. Despite the small size of this Relay, it can handle a large inrush current up to 120A for 100ms.

Features and Benefits of CA Series Relays

Small Size And Lightweight
Low Operating Power

CA Series Relays - Applications

Motorcycles And Automobiles
Agricultural Equipment
Battery Equipped Devices

Models table for series CA Series Relays
Part No.	Protective Construction	Mounting Type	Protective Element	Rated Coil Voltage	Rated Operating Power	Contact Arrangement	Terminal Type	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Contact Voltage Drop (After Electrical Life Test)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time<br>(At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time<br>(at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Water-Proof Standard	Inner Carton (Pieces)	Outer Carton (Pieces)
CA1aSR-12V-C-5	Sealed	Direct coupling type	With resistor inside	12V DC	1.57 W	1 Form A	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	130.9mA±10%	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 120A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 19 g .67 oz	JIS D0203 S2	20	200
CA1-DC12V-C	Sealed	Direct coupling type	None	12V DC	Standard type (1.8 W)	1 Form C	Plug-in type	Single side stable	Max. 8V DC	Min. 0.6V DC	150 mA	80Ω	10 to 15V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	30A for 1 min. (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.4 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 5 x 10⁵ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 31 g .1.09 oz	JIS D0203 S2	20	200
CA1b-12V-C-5	Sealed	Direct coupling type	None	12V DC	Standard type (1.8 W)	1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	150 mA	80Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	30A for 1 min. (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 60A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 19 g .67 oz	JIS D0203 S2	20	200
CA1bS-12V-N-5	Sealed	Screw mounting type	None	12V DC	Low operating power type (1.4 W)	1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	120 mA	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 60A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 19 g .67 oz	JIS D0203 S2	20	200
CA1aFS-12V-A-5	Dust cover	Rubber bracket A type	None	12V DC	Low operating power type (1.4 W)	1 Form A	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	120 mA	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	50 to 500 Hz, Min. 100 m/s² [approx. 10G] (Detection time: 10µs)	50 to 500 Hz, Min. 100 m/s² [approx. 10G]	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 120A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 23 g .81 oz	JIS D0203 R2	20	200
CA1bSR-12V-C-5	Sealed	Direct coupling type	With resistor inside	12V DC		1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC																				1x10^5
CA1bR-12V-C-5	Sealed	Direct coupling type	With resistor inside	12V DC		1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC																				1x10^5
CA1bSR-12V-A-5	Sealed	Rubber bracket A type	With resistor inside	12V DC		1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC																				1x10^5
CA1aSR-12V-A-5	Sealed	Rubber bracket A type	With resistor inside	12V DC	1.57 W	1 Form A	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	130.9mA±10%	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	50 to 500 Hz, Min. 100 m/s² [approx. 10G] (Detection time: 10µs)	50 to 500 Hz, Min. 100 m/s² [approx. 10G]	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 120A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 23 g .81 oz	JIS D0203 S2	20	200
CA1aS-12V-C-5	Sealed	Direct coupling type	None	12V DC	Low operating power type (1.4 W)	1 Form A	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	120 mA	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 120A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 19 g .67 oz	JIS D0203 S2	20	200

Models table for series CA Series Relays
Part No.	Protective Construction	Mounting Type	Protective Element	Rated Coil Voltage	Rated Operating Power	Contact Arrangement	Terminal Type	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Contact Voltage Drop (After Electrical Life Test)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time<br>(At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time<br>(at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Water-Proof Standard	Inner Carton (Pieces)	Outer Carton (Pieces)
CA1aSR-12V-C-5	Sealed	Direct coupling type	With resistor inside	12V DC	1.57 W	1 Form A	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	130.9mA±10%	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 120A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 19 g .67 oz	JIS D0203 S2	20	200
CA1-DC12V-C	Sealed	Direct coupling type	None	12V DC	Standard type (1.8 W)	1 Form C	Plug-in type	Single side stable	Max. 8V DC	Min. 0.6V DC	150 mA	80Ω	10 to 15V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	30A for 1 min. (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.4 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 5 x 10⁵ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 31 g .1.09 oz	JIS D0203 S2	20	200
CA1b-12V-C-5	Sealed	Direct coupling type	None	12V DC	Standard type (1.8 W)	1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	150 mA	80Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	30A for 1 min. (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 60A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 19 g .67 oz	JIS D0203 S2	20	200
CA1bS-12V-N-5	Sealed	Screw mounting type	None	12V DC	Low operating power type (1.4 W)	1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	120 mA	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 60A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 19 g .67 oz	JIS D0203 S2	20	200
CA1aFS-12V-A-5	Dust cover	Rubber bracket A type	None	12V DC	Low operating power type (1.4 W)	1 Form A	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	120 mA	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	50 to 500 Hz, Min. 100 m/s² [approx. 10G] (Detection time: 10µs)	50 to 500 Hz, Min. 100 m/s² [approx. 10G]	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 120A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 23 g .81 oz	JIS D0203 R2	20	200
CA1bSR-12V-C-5	Sealed	Direct coupling type	With resistor inside	12V DC		1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC																				1x10^5
CA1bR-12V-C-5	Sealed	Direct coupling type	With resistor inside	12V DC		1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC																				1x10^5
CA1bSR-12V-A-5	Sealed	Rubber bracket A type	With resistor inside	12V DC		1 Form B	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC																				1x10^5
CA1aSR-12V-A-5	Sealed	Rubber bracket A type	With resistor inside	12V DC	1.57 W	1 Form A	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	130.9mA±10%	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	50 to 500 Hz, Min. 100 m/s² [approx. 10G] (Detection time: 10µs)	50 to 500 Hz, Min. 100 m/s² [approx. 10G]	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 120A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 23 g .81 oz	JIS D0203 S2	20	200
CA1aS-12V-C-5	Sealed	Direct coupling type	None	12V DC	Low operating power type (1.4 W)	1 Form A	Plug-in type	Single side stable	Max. 8V DC	0.6 to 6V DC	120 mA	100Ω	10 to 16V DC	Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC)	Ag alloy	20A 12V DC	20A continuous (Coil applied voltage 14V DC, at 80°C 176°F)	1A 14V DC (at 20°C 68°F)	Max. 0.3 V (By carring 20 A 12V DC)	Min. 10 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	33 Hz, Min. 44.1 m/s² [approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours)	Min. 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, operating frequency: 2s ON, 2s OFF [Motor load] Min. 10⁵ at 12V DC, 120A (Inrush), 20A (Steady), Operating frequency: 2s ON, 2s OFF [Halogen lamp load] Min. 10⁵ at 12V DC, 100A (Inrush), 20A (Steady) Operating frequency: 1s ON, 14s OFF	Ambient temperature: –30 to +80°C –22 to +176°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 19 g .67 oz	JIS D0203 S2	20	200