CB Series Relays

Panasonic's CB Series is a compact and high capacity DC switching automotive relay available as an SPST (1FormA) or SPDT (1FormC) contact arrangement with Mini-ISO (International Organization for Standardization) terminals. The standard type switching capacity is 40A however there is also a high capacity version rated up to 70A @ 14VDC. The sealed and flux-resistant construction types are available with either PCB or plug-in type terminals and an optional bracket mount. The CB Series offers a built-in resistor option for coil protection against EMF and high heat resistance up to 125 DegC. Both 12V and 24V coils are available as standard part numbers.

Features and Benefits

Mini-ISO (International Organization for Standardization) Terminal Arrangement
Compact and High Capacity
Features Heat Resistant Type
Built-In Resistor Type Available

Applications

Automobiles
Construction Equipment
Agricultural Equipment, Conveyor, etc.

CB Series Relays

Part number list

Results 144

Models table for series CB Series Relays
Part No.	Protective Construction	Terminal Type	Protective Element	Rated Coil Voltage	Heat Resistance of Types	Contact Arrangement	Contact Capacity	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (at 20oC)	Coil Resistance (At 20oC)	Rated Operating Power (at 20°C)	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Inner Carton (Pieces)	Outer Carton (Pieces)
CB1-24V	Sealed	Plug-in type	None	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	75 mA		320Ω	1.8 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1-12V	Sealed	Plug-in type	None	12V DC	Standard type	1 Form C	Standard	Single side stable	3 to 7V DC	1.2 to 4.2V DC	117 mA		103Ω	1.4 W	10 to 16V DC	Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:40A 14V DC N.C.side:30A 14V DC	N.O. side: 40A N.C. side: 30A (Coil applied voltage 14V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1F-R-M-24V	Flux tight	Bracket type	With resistor inside	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	84 mA	287.2Ω		2.0 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1F-M-12V	Flux tight	Bracket type	None	12V DC	Standard type	1 Form C	Standard	Single side stable	3 to 7V DC	1.2 to 4.2V DC	117 mA		103Ω	1.4 W	10 to 16V DC	Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:40A 14V DC N.C.side:30A 14V DC	N.O. side: 40A N.C. side: 30A (Coil applied voltage 14V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1F-R-24V	Flux tight	Plug-in type	With resistor inside	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	84 mA	287.2Ω		2.0 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1F-P-24V	Flux tight	PC board type	None	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	75 mA		320Ω	1.8 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1-R-12V	Sealed	Plug-in type	With resistor inside	12V DC	Standard type	1 Form C	Standard	Single side stable	3 to 7V DC	1.2 to 4.2V DC	134 mA	89.5Ω		1.6 W	10 to 16V DC	Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:40A 14V DC N.C.side:30A 14V DC	N.O. side: 40A N.C. side: 30A (Coil applied voltage 14V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1-R-P-24V	Sealed	PC board type	With resistor inside	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	84 mA	287.2Ω		2.0 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1aF-T-M-24V	Flux tight	Bracket type	None	24V DC	High heat-resistant type	1 Form A	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	75 mA		320Ω	1.8 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	20A 28V DC	25A 28V DC (Coil applied voltage, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +125°C –40 to +257°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1a-T-R-12V	Sealed	Plug-in type	With resistor inside	12V DC	High heat-resistant type	1 Form A	Standard	Single side stable	3 to 7V DC	1.2 to 4.2V DC	134 mA	89.5Ω		1.6 W	10 to 16V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	50A 14V DC (Coil applied voltage, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +125°C –40 to +257°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200

Models table for series CB Series Relays
Part No.	Protective Construction	Terminal Type	Protective Element	Rated Coil Voltage	Heat Resistance of Types	Contact Arrangement	Contact Capacity	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (at 20oC)	Coil Resistance (At 20oC)	Rated Operating Power (at 20°C)	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Inner Carton (Pieces)	Outer Carton (Pieces)
CB1-24V	Sealed	Plug-in type	None	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	75 mA		320Ω	1.8 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1-12V	Sealed	Plug-in type	None	12V DC	Standard type	1 Form C	Standard	Single side stable	3 to 7V DC	1.2 to 4.2V DC	117 mA		103Ω	1.4 W	10 to 16V DC	Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:40A 14V DC N.C.side:30A 14V DC	N.O. side: 40A N.C. side: 30A (Coil applied voltage 14V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1F-R-M-24V	Flux tight	Bracket type	With resistor inside	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	84 mA	287.2Ω		2.0 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1F-M-12V	Flux tight	Bracket type	None	12V DC	Standard type	1 Form C	Standard	Single side stable	3 to 7V DC	1.2 to 4.2V DC	117 mA		103Ω	1.4 W	10 to 16V DC	Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:40A 14V DC N.C.side:30A 14V DC	N.O. side: 40A N.C. side: 30A (Coil applied voltage 14V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1F-R-24V	Flux tight	Plug-in type	With resistor inside	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	84 mA	287.2Ω		2.0 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1F-P-24V	Flux tight	PC board type	None	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	75 mA		320Ω	1.8 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1-R-12V	Sealed	Plug-in type	With resistor inside	12V DC	Standard type	1 Form C	Standard	Single side stable	3 to 7V DC	1.2 to 4.2V DC	134 mA	89.5Ω		1.6 W	10 to 16V DC	Max. 15mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:40A 14V DC N.C.side:30A 14V DC	N.O. side: 40A N.C. side: 30A (Coil applied voltage 14V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1-R-P-24V	Sealed	PC board type	With resistor inside	24V DC	Standard type	1 Form C	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	84 mA	287.2Ω		2.0 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	N.O.side:20A 28V DC N.C.side:10A 28V DC	N.O. side: 20A N.C. side: 10A (Coil applied voltage 28V DC, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1aF-T-M-24V	Flux tight	Bracket type	None	24V DC	High heat-resistant type	1 Form A	Standard	Single side stable	6 to 14V DC	2.4 to 8.4V DC	75 mA		320Ω	1.8 W	20 to 32V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	20A 28V DC	25A 28V DC (Coil applied voltage, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 10⁵ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +125°C –40 to +257°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200
CB1a-T-R-12V	Sealed	Plug-in type	With resistor inside	12V DC	High heat-resistant type	1 Form A	Standard	Single side stable	3 to 7V DC	1.2 to 4.2V DC	134 mA	89.5Ω		1.6 W	10 to 16V DC	Max. 15mΩ (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	50A 14V DC (Coil applied voltage, at 85°C 185°F, continuous)	1A 14V DC (at 20°C 68°F)	Min. 20 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 15ms (without contact bounce time)	Max. 15ms (Without contact bounce time) (Without diode)	Min. 200 m/s² [approx. 20G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G] (detection time: 10µs)	10 to 2,000 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y, Z direction: 4 hours	Min. 10⁶ (at 120 cpm)	Min. 5x10⁴ (Operating frequency: 2s ON, 2s OFF)	Ambient temperature: –40 to +125°C –40 to +257°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation)	Approx. 33 g 1.16 oz	50	200