| | Flux tight | 12V DC | Max. 7.2V DC | Min. 1.0V DC | 225Ω | Pin in Paste compliant type | 1 Form C x 2 (8 pins) | PC board type | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 105: at 25 A (inrush), 5A (steady), 14V DC: Min. 5x104: at 25A 14V DC (Motor lock) N.C.side: Min. 105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 6.5 g .23 oz | 40 | 1,000 | Tube |
| | Sealed | 12V DC | Max. 6.5V DC | Min. 0.8V DC | 180Ω | Standard type | 1 Form C x 2 (10 pins) | PC board type | Single side stable | Max. 6.5V DC | Min. 0.8V DC | 66.7 mA | 180Ω | 800 mW | 9 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 2x105: at 25 A (inrush), 5A (steady), 14V DC: Min. 105: at 25A 14V DC (Motor lock) N.C.side: Min. 2x105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 6.5 g .23 oz | 35 | 1,400 | Tube |
| | Flux tight | 12V DC | Max. 6.5V DC | Min. 0.8V DC | 180Ω | Pin in Paste compliant type | 1 Form C x 2 (10 pins) | PC board type | Single side stable | Max. 6.5V DC | Min. 0.8V DC | 66.7 mA | 180Ω | 800 mW | 9 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 105: at 25 A (inrush), 5A (steady), 14V DC: Min. 5x104: at 25A 14V DC (Motor lock) N.C.side: Min. 105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 6.5 g .23 oz | 35 | 1,400 | Tube |
| | Sealed | 12V DC | Max. 6.5V DC | Min. 0.8V DC | 180Ω | Standard type | 1 Form C | PC board type | Single side stable | Max. 6.5V DC | Min. 0.8V DC | 66.7 mA | 180Ω | 800 mW | 9 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 2x105: at 25 A (inrush), 5A (steady), 14V DC: Min. 105: at 25A 14V DC (Motor lock) N.C.side: Min. 2x105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | 70 | 2,800 | Tube |
| | Flux tight | 12V DC | Max. 6.5V DC | Min. 0.8V DC | 180Ω | Pin in Paste compliant type | 1 Form C | PC board type | Single side stable | Max. 6.5V DC | Min. 0.8V DC | 66.7 mA | 180Ω | 800 mW | 9 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 105: at 25 A (inrush), 5A (steady), 14V DC: Min. 5x104: at 25A 14V DC (Motor lock) N.C.side: Min. 105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | 70 | 2,800 | Tube |
| | Sealed | 12V DC | Max. 7.2V DC | Min. 1.0V DC | 225Ω | Standard type | 1 Form C | PC board type | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 2x105: at 25 A (inrush), 5A (steady), 14V DC: Min. 105: at 25A 14V DC (Motor lock) N.C.side: Min. 2x105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | 70 | 2,800 | Tube |
| | Sealed | 12V DC | Max. 7.2V DC | Min. 1.0V DC | 225Ω | Standard type | 1 Form C x 2 (10 pins) | PC board type | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 2x105: at 25 A (inrush), 5A (steady), 14V DC: Min. 105: at 25A 14V DC (Motor lock) N.C.side: Min. 2x105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 6.5 g .23 oz | 35 | 1,400 | Tube |
| | Sealed | 12V DC | Max. 7.2V DC | Min. 1.0V DC | 225Ω | Standard type | 1 Form C x 2 (8 pins) | PC board type | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 2x105: at 25 A (inrush), 5A (steady), 14V DC: Min. 105: at 25A 14V DC (Motor lock) N.C.side: Min. 2x105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 6.5 g .23 oz | 40 | 1,000 | Tube |
| | Flux tight | 12V DC | Max. 7.2V DC | Min. 1.0V DC | 225Ω | Pin in Paste compliant type | 1 Form C | PC board type | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 105: at 25 A (inrush), 5A (steady), 14V DC: Min. 5x104: at 25A 14V DC (Motor lock) N.C.side: Min. 105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 3.5 g .12 oz | 70 | 2,800 | Tube |
| | Flux tight | 12V DC | Max. 7.2V DC | Min. 1.0V DC | 225Ω | Pin in Paste compliant type | 1 Form C x 2 (10 pins) | PC board type | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 50mΩ (N.O. side: typ. 7mΩ, N.C. side: typ. 10mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC | N.O. side: 20A for 1hour, 30A for 2 minutes (Coil applied voltage 14V DC at 20°C 68°F) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 107 (at 120 cpm) | [Resistive load]Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF [Motor load] N.O.side: Min. 105: at 25 A (inrush), 5A (steady), 14V DC: Min. 5x104: at 25A 14V DC (Motor lock) N.C.side: Min. 105: at 20 A 14V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 6.5 g .23 oz | 35 | 1,400 | Tube |