| | Surface-mount type | 12V DC | Max. 7.2V DC | Min. 1.0V DC | High heat-resistant type | 1 Form A | Tape and reel (N.O.sidermal N.O.side terminal direction in pull-out direction) | Sealed | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | 30A 14V DC | 30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F) | 1A 14V DC (at 20°C 68°F) | Max. 0.5 V (By voltage drop at 30 A, 12 V DC) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours) | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 5.5 g .19 oz | 200 | 600 |
| | Surface-mount type | 12V DC | Max. 7.2V DC | Min. 1.0V DC | High heat-resistant type | 1 Form C | Tape and reel (Reverse N.O.side terminal direction in pull-out direction) | Sealed | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O.side:30A 14V DC N.C.side:15A 14V DC | 30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F) | 1A 14V DC (at 20°C 68°F) | N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours) | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 5.5 g .19 oz | 200 | 600 |
| | PC board type | 12V DC | Max. 7.2V DC | Min. 1.0V DC | High heat-resistant type | 1 Form A | Tube | Sealed | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | 30A 14V DC | 30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F) | 1A 14V DC (at 20°C 68°F) | Max. 0.5 V (By voltage drop at 30 A, 12 V DC) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours) | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 5.5 g .19 oz | 50 | 1,500 |
| | PC board type | 12V DC | Max. 7.2V DC | Min. 1.0V DC | Standard type | 1 Form C | Tube | Sealed | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O.side:30A 14V DC N.C.side:15A 14V DC | 30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) | 1A 14V DC (at 20°C 68°F) | N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours) | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 5.5 g .19 oz | 50 | 1,500 |
| | Surface-mount type | 12V DC | Max. 7.2V DC | Min. 1.0V DC | High heat-resistant type | 1 Form A | Tape and reel (Reverse N.O.side terminal direction in pull-out direction) | Sealed | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | 30A 14V DC | 30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F) | 1A 14V DC (at 20°C 68°F) | Max. 0.5 V (By voltage drop at 30 A, 12 V DC) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours) | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 5.5 g .19 oz | 200 | 600 |
| | Surface-mount type | 12V DC | Max. 7.2V DC | Min. 1.0V DC | High heat-resistant type | 1 Form C | Tape and reel (N.O.sidermal N.O.side terminal direction in pull-out direction) | Sealed | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O.side:30A 14V DC N.C.side:15A 14V DC | 30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F) | 1A 14V DC (at 20°C 68°F) | N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours) | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 5.5 g .19 oz | 200 | 600 |
| | PC board type | 12V DC | Max. 7.2V DC | Min. 1.0V DC | Standard type | 1 Form A | Tube | Sealed | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | 30A 14V DC | 30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) | 1A 14V DC (at 20°C 68°F) | Max. 0.5 V (By voltage drop at 30 A, 12 V DC) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours) | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s | Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Approx. 5.5 g .19 oz | 50 | 1,500 |
| | PC board type | 12V DC | Max. 7.2V DC | Min. 1.0V DC | High heat-resistant type | 1 Form C | Tube | Sealed | Single side stable | Max. 7.2V DC | Min. 1.0V DC | 53.3 mA | 225Ω | 640 mW | 10 to 16V DC | Max. 30mΩ (typ. 5mΩ) (By voltage drop 1A 6V DC) | Ag alloy | N.O.side:30A 14V DC N.C.side:15A 14V DC | 30A for 1 hour, 40A/2 min (Coil applied voltage 16V DC, at 20°C 68°F) 25A for 1 hour, 35A/2 min (Coil applied voltage 16V DC, at 85°C 185°F) 20A for 1 hour, 30A/2 min (Coil applied voltage 16V DC, at 110°C 230°F) | 1A 14V DC (at 20°C 68°F) | N.O. side: Max. 0.5 V (By voltage drop at 30 A, 12 V DC) N.C. side: Max. 0.5 V (By voltage drop at 15 A, 12 V DC) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2[approx. 4.5G] (Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours) | Min. 107 (at 120 cpm) | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 2x105(motor free): at 80 A (inrush), 16A (steady), 14V DC Operating frequency: ON 2s, OFF 6s [Lamp load] Min. 105: at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: ON 1s, OFF 14s | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Approx. 5.5 g .19 oz | 50 | 1,500 |