TA Series Relays

Models table for series TA Series Relays
Part No.	Datasheet	Rated Coil Voltage	Coil Resistance (at 20oC)	Contact Arrangement	Protective Construction	Terminal Type	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power	Usable Voltage Range	Contact Type	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time<br>(At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time<br>(at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Packing Quantity	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTA23		12V DC	225Ω	1 Form C	Sealed	PC board type	Single side stable	Max. 7.7V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Standard type	Max. 50mΩ (N.O. side: typ. 5mΩ, N.C. side: typ. 6mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A/ 3 min (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 100 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +85°C, Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 8 g	Tube	25	1,000
ACTA22		12V DC	160Ω	1 Form C	Sealed	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	75 mA	160Ω	900 mW	10 to 16V DC	Standard type	Max. 50mΩ (N.O. side: typ. 5mΩ, N.C. side: typ. 6mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A/ 3 min (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 100 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +85°C, Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 8 g	Tube	25	1,000

Models table for series TA Series Relays
Part No.	Datasheet	Rated Coil Voltage	Coil Resistance (at 20oC)	Contact Arrangement	Protective Construction	Terminal Type	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power	Usable Voltage Range	Contact Type	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time<br>(At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time<br>(at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Packing Quantity	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTA23		12V DC	225Ω	1 Form C	Sealed	PC board type	Single side stable	Max. 7.7V DC	Min. 0.8V DC	53.3 mA	225Ω	640 mW	10 to 16V DC	Standard type	Max. 50mΩ (N.O. side: typ. 5mΩ, N.C. side: typ. 6mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A/ 3 min (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 100 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +85°C, Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 8 g	Tube	25	1,000
ACTA22		12V DC	160Ω	1 Form C	Sealed	PC board type	Single side stable	Max. 6.5V DC	Min. 0.8V DC	75 mA	160Ω	900 mW	10 to 16V DC	Standard type	Max. 50mΩ (N.O. side: typ. 5mΩ, N.C. side: typ. 6mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A/ 3 min (Coil applied voltage 12V DC, at 20°)	1A 14V DC (at 20°C)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min (Detection current: 10mA)	500 Vrms for 1 min (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without protective element)	Min. 100 m/s² (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)	10 to 100 Hz, Min. 44.1 m/s² (Detection time: 10µs)	10 to 100 Hz, Min. 44.1 m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 times/min)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +85°C, Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 8 g	Tube	25	1,000