| | Sealed | Single side stable | 12V DC | 110Î© | Standard type | Double make contact 2 Form A | Standard type (Ag alloy / Cu clad) | PC board type | Max. 6.5V DC | Min. 0.5V DC | 109 mA | 110Î© | 1,309 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | 30A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +85Â°C â€“40 to +185Â°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |

| | Flux tight | Single side stable | 12V DC | 110Î© | Pin in Paste compliant type | 1 Form A | Standard type | PC board type | Max. 6.5V DC | Min. 0.5V DC | 109 mA | 110Î© | 1,309 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | 30A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +110Â°C â€“40 to +230Â°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |

| | Flux tight | Single side stable | 12V DC | 160Î© | Pin in Paste compliant type | 1 Form C | Standard type | PC board type | Max. 7.0V DC | Min. 0.5V DC | 75 mA | 160Î© | 900 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©, N.C. side: typ. 4mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | N.O. side: 30A 14V DC, N.C. side: 15A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +110Â°C â€“40 to +230Â°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |

| | Sealed | Single side stable | 12V DC | 110Î© | Standard type | 1 Form C | Standard type (Ag alloy / Cu clad) | PC board type | Max. 6.5V DC | Min. 0.5V DC | 109 mA | 110Î© | 1,309 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©, N.C. side: typ. 4mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | N.O. side: 30A 14V DC, N.C. side: 15A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +85Â°C â€“40 to +185Â°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |

| | Flux tight | Single side stable | 12V DC | 110Î© | Pin in Paste compliant type | Double make contact 2 Form A | Standard type | PC board type | Max. 6.5V DC | Min. 0.5V DC | 109 mA | 110Î© | 1,309 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | 30A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +110Â°C â€“40 to +230Â°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |

| | Sealed | Single side stable | 12V DC | 160Î© | High heat-resistant type | Double make contact 2 Form A | Standard type (Ag alloy / Cu clad) | PC board type | Max. 7.0V DC | Min. 0.5V DC | 75 mA | 160Î© | 900 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | 30A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +110Â°C â€“40 to +230Â°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |

| | Sealed | Single side stable | 12V DC | 225Î© | Standard type | 1 Form C | Standard type | PC board type | Max. 7.5V DC | Min. 0.5V DC | 53.3 mA | 225Î© | 640 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©, N.C. side: typ. 4mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | N.O. side: 30A 14V DC, N.C. side: 15A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +85Â°C â€“40 to +185Â°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |

| | Flux tight | Single side stable | 12V DC | 160Î© | Pin in Paste compliant type | 1 Form A | Standard type | PC board type | Max. 7.0V DC | Min. 0.5V DC | 75 mA | 160Î© | 900 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | 30A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +110Â°C â€“40 to +230Â°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |

| | Sealed | Single side stable | 12V DC | 225Î© | Standard type | 1 Form C | Standard type (Ag alloy / Cu clad) | PC board type | Max. 7.5V DC | Min. 0.5V DC | 53.3 mA | 225Î© | 640 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©, N.C. side: typ. 4mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | N.O. side: 30A 14V DC, N.C. side: 15A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +85Â°C â€“40 to +185Â°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |

| | Sealed | Single side stable | 12V DC | 160Î© | Standard type | 1 Form C | Standard type (Ag alloy / Cu clad) | PC board type | Max. 7.0V DC | Min. 0.5V DC | 75 mA | 160Î© | 900 mW | 10 to 16V DC | Max. 50mÎ© (N.O. side: typ. 3mÎ©, N.C. side: typ. 4mÎ©) (By voltage drop 1A 6V DC) | Ag alloy | 35A for 1hour (Coil applied voltage 12V DC, at 20Â°C 68Â°F) (initial) | N.O. side: 30A 14V DC, N.C. side: 15A 14V DC | 1A 14V DC (at 20Â°C 68Â°F) | Min. 100 MÎ© (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (Without contact bounce time) (Without diode) | Min. 100 m/s^{2} [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10Âµs) | Min. 1,000 m/s^{2} [approx. 100G] (Half-wave pulse of sine wave: 6ms) | 10 to 100 Hz, Min. 44.1 m/s^{2} [approx. 4.5G] (Detection time: 10Âµs) | 10 to 500 Hz, Min. 44.1 m/s^{2} [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | [Resistive load] Min. 10^{5} at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10^{5} 30 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF [Lamp load] Min. 2 x 10^{5} at 84 A (inrush), 12A (steady), 14 V DC, Operating frequency: 1s ON, 14s OFF | Ambient temperature: â€“40 to +85Â°C â€“40 to +185Â°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) | Min. 10^{7} (at 120 cpm) | Approx. 10 g .35 oz | Tube | 40 | 800 |