TE Series

Panasonic's TE Series Automotive Relays are available in a variety of contact arrangements including 1 Form C, and twin type 1 Form C x 2 (8 Pins), and 1 Form C x 2 (10 Pins) construction type options. The TE Series compact Automotive Relays offer 25A load switching. The TE Series also offers pin-in paste compliant options.

Features and Benefits:

Automotive Grade Relay Design
Small Compact Design For Space Savings
High Switching And Carry Current Capability For DC Loads
- Can Meet All Resistive Switching At 14 VDC And Carry Loads Up To 30A Continuous Current
High Heat Resistance
- Wide Operating Ambient Temperature Of -40°C to +110°C
Robust Current Switching Capability For Motor Loads
- Can Handle 25A @ 14 VDC Motor Lock Load For 100K Cycles
RoHS/REACH Compliant

TE Series

Part number list

Results 37

Models table for series TE Series
Part No.	Protective Construction	Coil Resistance (at 20oC)	Heat Resistance of Types	Contact Arrangement	Contact Type	Terminal Type	Operating Function	Rated Coil Voltage	Operate (Set) Voltage (at20°C) (Initial)	Coil Resistance (At 20oC)	Rated Operating Power	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Packing Quantity	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTE2R2	Flux tight	160Ω	Pin in Paste compliant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 6.5V DC	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE2R1	Flux tight	110Ω	Pin in Paste compliant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 5.5V DC	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE2H3	Sealed	220Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 7.7V DC	220Ω	655 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE2H1	Sealed	110Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 5.5V DC	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE3CH3	Sealed	220Ω	High heat-resistant type	1 Form C x 2 (8 pins)	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	12V DC	Max. 7.7V DC	220Ω	655 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000
ACTE3CH2A05V	Sealed	160Ω	High heat-resistant type	1 Form C x 2 (8 pins)	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	12V DC	Max. 6.5V DC	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000
ACTE3CR1	Flux tight	110Ω	Pin in Paste compliant type	1 Form C x 2 (8 pins)	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	12V DC	Max. 5.5V DC	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000
ACTE3CH1	Sealed	110Ω	High heat-resistant type	1 Form C x 2 (8 pins)	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	12V DC	Max. 5.5V DC	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000
ACTE2H2	Sealed	160Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 6.5V DC	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE3R2	Flux tight	160Ω	Pin in Paste compliant type	1 Form C x 2 (8 pins)	Standard type	PC board type	Single side stable	12V DC	Max. 6.5V DC	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000

Models table for series TE Series
Part No.	Protective Construction	Coil Resistance (at 20oC)	Heat Resistance of Types	Contact Arrangement	Contact Type	Terminal Type	Operating Function	Rated Coil Voltage	Operate (Set) Voltage (at20°C) (Initial)	Coil Resistance (At 20oC)	Rated Operating Power	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Packing Quantity	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTE2R2	Flux tight	160Ω	Pin in Paste compliant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 6.5V DC	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE2R1	Flux tight	110Ω	Pin in Paste compliant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 5.5V DC	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE2H3	Sealed	220Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 7.7V DC	220Ω	655 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE2H1	Sealed	110Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 5.5V DC	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE3CH3	Sealed	220Ω	High heat-resistant type	1 Form C x 2 (8 pins)	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	12V DC	Max. 7.7V DC	220Ω	655 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000
ACTE3CH2A05V	Sealed	160Ω	High heat-resistant type	1 Form C x 2 (8 pins)	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	12V DC	Max. 6.5V DC	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000
ACTE3CR1	Flux tight	110Ω	Pin in Paste compliant type	1 Form C x 2 (8 pins)	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	12V DC	Max. 5.5V DC	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000
ACTE3CH1	Sealed	110Ω	High heat-resistant type	1 Form C x 2 (8 pins)	Standard type (Ag alloy / Cu clad)	PC board type	Single side stable	12V DC	Max. 5.5V DC	110Ω	1,309 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000
ACTE2H2	Sealed	160Ω	High heat-resistant type	1 Form C	Standard type	PC board type	Single side stable	12V DC	Max. 6.5V DC	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 3.5 g .12 oz	Tube	50	2,000
ACTE3R2	Flux tight	160Ω	Pin in Paste compliant type	1 Form C x 2 (8 pins)	Standard type	PC board type	Single side stable	12V DC	Max. 6.5V DC	160Ω	900 mW	10 to 16V DC	Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC)	Ag alloy	N.O. side: 20A 14V DC, N.C. side: 10A 14V DC	25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1 min. (Detection current: 10mA)	500 Vrms for 1 min. (Detection current: 10mA)	Max. 10ms (without contact bounce time)	Max. 10ms (Without contact bounce time) (Without diode)	Min. 100 m/s² [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)	Min. 1,000 m/s² [approx. 100G] (Half-wave pulse of sine wave: 6ms)	10 to 100 Hz, Min. 44.1 m/s² [approx. 4.5G] (Detection time: 10µs)	10 to 500 Hz, Min. 44.1 m/s² [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 10⁷ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 10⁵ 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF	Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	Approx. 6.5 g .23 oz	Tube	40	2,000

Automotive Relays Available Through Panasonic Franchised Distributors

ACTE3CH2A05V Automotive Relay

The ACTE3CH2A05V is the only part number available for purchase in the Panasonic Automotive Relays TE Series through franchised distributors.

The TE Series ACTE3CH2A05V part is a compact Automotive Relay with a 20A @ 14VDC switching capacity and 25A maximum carry current rating. This Twin Type Relay has a 1 Form C x 2 contact arrangement and is mounted using PCB terminals and is also capable of switching a 25A @ 14 V DC motor lock load. This Relay is designed for usage within a dedicated 12VDC power supply system and features a small footprint area. The ACTE3CH2A05V was developed for controlling both the forward and reverse directions of a motor.

The TE Series ACTE3CH2A05V part is manufactured in Vietnam.

Learn More About Automotive Relays Available Through Panasonic Franchised Distributors