ADJH21012 1119 in stock
Specification
| Item | Performance characteristics |
|---|---|
| Operating Function | 1 coil latching |
| Type Classification | Standard type (Without manual switch) |
| Rated Coil Voltage | 12 V DC |
| Protective Construction | Flux-resistant |
| Terminal Type | PC board terminal |
| Packing Quantity; Inner Carton (Pcs.) | 50 |
| Packing Quantity; Outer Carton (Pcs.) | 200 |
| Set Voltage | Max. 75% V of rated coil voltage (Initial) |
| Rated Operating Current [±10%] (at 20°C) | Set coil: 83.3 mA Reset coil: 83.3 mA |
| Reset Voltage | Max. 75% V of rated coil voltage (Initial) |
| Resistance [±10%] (at 20°C) | Set coil: 144 Ω Reset coil: 144 Ω |
| Rated Operating Power | 1,000 mW |
| Max. Allowable Voltage (at 20°C 68°F) | 130% V of rated coil voltage |
| Contact Arrangement | 1 Form A |
| Contact Shape | Single |
| Contact Resistance (Initial) | Max. 20 mΩ (by voltage drop 24 V DC 1 A) |
| Contact Material | AgSnO2 type |
| Contact Rating (Resistive Load) | 50 A 277 V AC |
| Max. Switching Power (Resistive Load) | 13,850 VA (50 A 277 V AC) |
| Max. Switching Voltage | 480 V AC |
| Max. Switching Current | 50 A (AC) |
| Min. Switching Load (Reference Value) | 100 mA 5 V DC |
| Insulation Resistance (Initial) | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) |
| Dielectric Strength (Initial): Between Open Contacts | 1,500 Vrms for 1 min (detection current: 10 mA) |
| Dielectric Strength (Initial): Between Contact and Coil | 4,000 Vrms for 1 min (detection current: 10 mA) |
| Surge Withstand Voltage (Initial): Between Contact and Coil | 12,000 V |
| Time (Initial) (at 20°C 68°F) (Initial) | Max. 20 ms at rated coil voltage (without bounce) |
| Reset Time (Initial) (at20°C 68°F) | Max. 20 ms at rated coil voltage (without bounce) |
| Vibration Resistance (Functional) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) |
| Hock Resistance (Destructive) | 1,000 m/s2 (half-sine shock pulse: 6 ms) |
| Hock Resistance (Functional) | 100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) |
| Vibration Resistance (Destructive) | 10 to 55 Hz (at double amplitude of 2 mm) |
| Mechanical Life | Min. 106 ope. (switching frequency: at 180 times/min) |
| Conditions | Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +70°C at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation) |
| Weight (Typ.) | Approx. 31 g |
| Resistive Load | [switching frequency ON : OFF = 1 s : 9 s] Min. 100x103 ope. 25 A 277 V AC Min. 10x103 ope. 50 A 277 V AC |
| Inrush Load; Tungsten | [switching frequency ON : OFF = 1 s : 59 s] Min. 25x103 ope. 2,400 W 120 V AC |
| Inrush Load; Electronic Ballast | [switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ103 ope. 20 A 277 V AC |
| Inrush Load; Capacitive (IEC 60669-1) | [switching frequency ON : OFF = 1 s : 9 s] Min. 30x103 ope. 20 A 250 V AC 200 µF |
Stock Check
| Distributor | Quantity | Inventory Date |
|---|---|---|
| Digi-Key Electronics United States Tel. 1-800-344-4539 | 754 | 06/28/2022 |
| Mouser Electronics Inc. United States Tel. 1-800-346-6873 | 160 | 06/29/2022 |
| Newark, An Avnet Company United States Tel. 1-800-4-NEWARK | 155 | 06/28/2022 |
| TTI Inc United States Tel. 1-800-225-5884 | 50 | 06/28/2022 |
Important
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.
What's New
Stay up to date
Latest Videos
Playlist
Relays & Contactors
New Product Spotlight: PA-N Series General Power Relays
Relays & Contactors Icon
