Specification

Specifications table for model ADJH23024
ItemPerformance characteristics
Operating Function 2 coil latching
Type ClassificationStandard type (Without manual switch)
Rated Coil Voltage24V DC
Protective ConstructionFlux-resistant
Terminal TypePC board terminal
Packing Quantity; Inner Carton (Pcs.) 50
Packing Quantity; Outer Carton (Pcs.)200
Set Voltage 75%V or less of rated coil voltage (Initial)
Reset Voltage75%V or less of rated coil voltage (Initial)
Rated Operating Current [±10%] (at 20°C)Set coil: 83.3 mA
Reset coil: 83.3 mA
Resistance [±10%] (at 20°C) Set coil: 288 Ω
Reset coil: 288 Ω
Rated Operating Power 2,000mW
Max. Allowable Voltage (at 20°C 68°F)130% of rated voltage
Contact Arrangement1 Form A
Contact ShapeSingle
Contact Resistance (Initial)Max. 20mΩ (by voltage drop 24V DC 1A)
Contact MaterialAgSnO2 type
Contact Rating (Resistive Load)50A 277V AC
Max. Switching Power (Resistive Load) 13,850 VA (50A 277V AC)
Max. Switching Voltage480 V AC
Max. Switching Current50A (AC)
Min. Switching Load (Reference Value) 100mA 5V DC
Insulation Resistance (Initial)Min. 1,000MΩ (at 500V DC) Measured portion is the same as the case of dielectric strength
Dielectric Strength (Initial): Between Open ContactsAC 1,500 Vrms for 1 min. (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact and CoilAC 4,000 Vrms for 1 min. (detection current: 10 mA)
Surge Withstand Voltage (Initial): Between Contact and Coil12,000 V
Time (Initial) (at 20°C 68°F) (Initial) Max. 20 ms (at rated coil voltage, without bounce)
Reset Time (Initial) (at20°C 68°F) Max. 20 ms (at rated coil voltage, without bounce)
Hock Resistance (Functional)100 m/s2 (half-sine shock pulse: 11 ms; detection time: 10 µs)
Hock Resistance (Destructive)1,000 m/s2 (half-sine shock pulse: 6 ms)
Vibration Resistance (Functional)10 to 55 Hz at double amplitude of 1.5 mm (detection time: 10µs)
Vibration Resistance (Destructive)10 to 55 Hz at double amplitude of 2.0 mm
Mechanical LifeMin. 1x106 (at 180 times/min.)
ConditionsAmbient Temperature: –40 to +85°C –40 to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Weight (Typ.)Approx. 31 g
Resistive LoadMin. 1x104 ope. 50A 277V AC (ON:OFF = 1s:9s)
Min. 1x104 ope. 25A 277V AC (ON:OFF = 1s:9s)
Inrush Load; TungstenMin. 2.5x104 ope. 2,400W 120V AC (ON:OFF = 1s:59s)
Inrush Load; Electronic Ballast Min. 6x103 ope. 20A 277V AC (ON:OFF = 1s:9s)
Inrush Load; Capacitive (IEC 60669-1)Min. 3x104 ope. 20A 250V AC 200 µF (ON:OFF = 1s:9s)

Stock Check

Stock check for product ADJH23024
DistributorQuantityInventory Date
Digi-Key Electronics
United States
Tel. 1-800-344-4539
91711/20/2019
Digi-Key Electronics
United States
Tel. 1-800-344-4539
91711/20/2019
Mouser Electronics
United States
Tel. 800-346-6873
8611/20/2019
Arrow Electronics
United States
Tel. 1-855-326-4757
811/20/2019
Future Electronics
Canada
Tel. 1-514-694-7710
611/20/2019

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

What's New

Stay up to date