Single side stable

12 V DC

1 Form A

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

16.6 mA

720 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgSnO_{2} type

10 A 250 V AC, 10 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

10 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 5 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC

Single side stable

24 V DC

1 Form A

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

8.3 mA

2,880 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgSnO_{2} type

10 A 250 V AC, 10 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

10 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 5 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC

Single side stable

6 V DC

1 Form A

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

33.3 mA

180 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgSnO_{2} type

10 A 250 V AC, 10 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

10 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 5 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC

Single side stable

3 V DC

1 Form A

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

66.6 mA

45 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgSnO_{2} type

10 A 250 V AC, 10 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

10 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 5 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC

Single side stable

24 V DC

1 Form A 1 Form B

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

8.3 mA

2,880 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgNi type

8 A 250 V AC, 8 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

8 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 6 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 8 A 30 V DC

4,000 Vrms for 1 min (detection current: 10 mA)

Single side stable

9 V DC

1 Form A 1 Form B

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

22.2 mA

405 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgNi type

8 A 250 V AC, 8 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

8 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 6 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 8 A 30 V DC

4,000 Vrms for 1 min (detection current: 10 mA)

Single side stable

3 V DC

1 Form A 1 Form B

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

66.6 mA

45 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgNi type

8 A 250 V AC, 8 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

8 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 6 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 8 A 30 V DC

4,000 Vrms for 1 min (detection current: 10 mA)

Single side stable

3 V DC

2 Form A

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

66.6 mA

45 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgNi type

8 A 250 V AC, 8 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

8 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 6 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 8 A 30 V DC

4,000 Vrms for 1 min (detection current: 10 mA)

Single side stable

6 V DC

1 Form A 1 Form B

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

33.3 mA

180 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgNi type

8 A 250 V AC, 8 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

8 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 6 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 8 A 30 V DC

4,000 Vrms for 1 min (detection current: 10 mA)

Single side stable

5 V DC

1 Form A 1 Form B

Sealed

PC board terminal

Sockets are available.

50

500

Max. 70% V of rated coil voltage (Initial)

Min. 10% V of rated coil voltage (Initial)

40.0 mA

125 Ω

200 mW

130% V of rated coil voltage

Single

Max. 30 mΩ (by voltage drop 6 V DC 1 A)

Au-flashed AgNi type

8 A 250 V AC, 8 A 30 V DC

2,500 VA (AC), 300 W (DC)

250 V AC, 125 V DC (0.2 A)

8 A (AC, DC)

10 mA 5 V DC

Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)

1,000 Vrms for 1 min (detection current: 10 mA)

4,000 Vrms for 1 min (detection current: 10 mA)

10,000 V

Max. 10 ms at rated coil voltage (without bounce)

Max. 8 ms at rated coil voltage (without bounce, without diode)

98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 μs)

980 m/s^{2} (half-sine shock pulse: 6 ms)

10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)

10 to 55 Hz (at double amplitude of 3 mm)

Min. 50x10^{6} ope. (switching frequency: at 300 times/min)

Ambient temperature: -40 to +65℃ Humidity: 5 to 85% RH (Avoid icing and condensation)

Approx. 6 g

[switching frequency: 20 times/min] Min. 100x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 8 A 30 V DC

4,000 Vrms for 1 min (detection current: 10 mA)