| | 1 coil latching | Inrush type (16A, Inrush current 100A) | Low profile type | 6 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | 33.3 mA | 180 Î© | 200 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Over 8A to 16A) Ambient temperature: -40 to +85Â°C (8A or less) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7.5 g | Min. 50x10^{3} ope. 8 A 250 V AC (switching frequency: 20 times/min) Min. 20x10^{3} ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s) | Min. 25x10^{3} ope. Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s) | Carton |

| | 1 coil latching | Inrush type (16A, Inrush current 100A) | IEC60335-1compliant type | 5 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | 40 mA | 125 Î© | 200 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Over 8A to 16A) Ambient temperature: -40 to +85Â°C (8A or less) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | Min. 50x10^{3} ope. 8 A 250 V AC (switching frequency: 20 times/min) Min. 20x10^{3} ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s) | Min. 25x10^{3} ope. Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s) | Carton |

| | 1 coil latching | Inrush type (16A, Inrush current 100A) | IEC60335-1compliant type | 6 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | 33.3 mA | 180 Î© | 200 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Over 8A to 16A) Ambient temperature: -40 to +85Â°C (8A or less) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | Min. 50x10^{3} ope. 8 A 250 V AC (switching frequency: 20 times/min) Min. 20x10^{3} ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s) | Min. 25x10^{3} ope. Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s) | Carton |

| | 1 coil latching | Standard type (8A) | IEC60335-1compliant type | 6 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | 33.3 mA | 180 Î© | 200 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 8 A 250 V AC | 2,000 VA | 250 V AC | 8 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85Â°C (Allowable temperature is from -40 to +70Â°C at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [switching frequency: 20 times/min] Min. 50x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 5 A 250 V AC | | Carton |

| | 1 coil latching | Standard type (8A) | Reflow compatible type | 3 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | 66.7 mA | 45 Î© | 200 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 8 A 250 V AC | 2,000 VA | 250 V AC | 8 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85Â°C (Allowable temperature is from -40 to +70Â°C at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [switching frequency: 20 times/min] Min. 50x10^{3} ope. 8 A 250 V AC | | Carton |

| | 2 coil latching | Standard type (8A) | Reflow compatible type | 3 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | Set coil: 133.3 mA Reset coil: 133.3 mA | Set coil: 22.5 Î© Reset coil: 22.5 Î© | 400 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 8 A 250 V AC | 2,000 VA | 250 V AC | 8 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85Â°C (Allowable temperature is from -40 to +70Â°C at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [switching frequency: 20 times/min] Min. 50x10^{3} ope. 8 A 250 V AC | | Carton |

| | 2 coil latching | Inrush type (16A, Inrush current 100A) | Low profile type | 5 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | Set coil: 80 mA Reset coil: 80 mA | Set coil: 62.5 Î© Reset coil: 62.5 Î© | 400 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Over 8A to 16A) Ambient temperature: -40 to +85Â°C (8A or less) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7.5 g | Min. 50x10^{3} ope. 8 A 250 V AC (switching frequency: 20 times/min) Min. 20x10^{3} ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s) | Min. 25x10^{3} ope. Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s) | Carton |

| | 1 coil latching | Inrush type (16A, Inrush current 100A) | Low profile type | 9 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | 22.2 mA | 405 Î© | 200 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Over 8A to 16A) Ambient temperature: -40 to +85Â°C (8A or less) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 7.5 g | Min. 50x10^{3} ope. 8 A 250 V AC (switching frequency: 20 times/min) Min. 20x10^{3} ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s) | Min. 25x10^{3} ope. Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s) | Carton |

| | 1 coil latching | Inrush type (16A, Inrush current 100A) | IEC60335-1compliant type | 24 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | 8.3 mA | 2,880 Î© | 200 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Over 8A to 16A) Ambient temperature: -40 to +85Â°C (8A or less) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | Min. 50x10^{3} ope. 8 A 250 V AC (switching frequency: 20 times/min) Min. 20x10^{3} ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s) | Min. 25x10^{3} ope. Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s) | Carton |

| | 1 coil latching | Inrush type (16A, Inrush current 100A) | IEC60335-1compliant type | 12 V DC | Flux-resistant | PC board terminal | 100 | 500 | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | 16.7 mA | 720 Î© | 200 mW | 110% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 12,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Over 8A to 16A) Ambient temperature: -40 to +85Â°C (8A or less) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | Min. 50x10^{3} ope. 8 A 250 V AC (switching frequency: 20 times/min) Min. 20x10^{3} ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s) | Min. 25x10^{3} ope. Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s) | Carton |