PF Series Relays

Panasonic’s PF Series Relays have been developed to comply with standards required for Programmable Logic Controllers (PLC) for production facilities, including reinforced insulation to satisfy EN/IEC 61810-1 standards. The PF Series Relay products can switch a 6A at 250 V AC and AC15 and DC13 inductive loads. These Relays are available in 1 Form A or 1 Form C contact arrangement with a slim footprint to allow for high-density mounting.

The PF Series features a high 4000V breakdown voltage and 6000V surge voltage to protect controllers against surges and noise.

Features and Benefits

  • Slim Size for High-Density Mounting
  • Satisfies Reinforced Insulation European Safety Standard (EN61810-1 and EN61010)
  • Supports AC15 and DC13 (inductive load)
  • EN60335-1 GWT Approved for Heat and Fire Resistance (VDE Certified)
  • Low Operating Power

Applications

  • Industrial Equipment And Office Equipment
  • Measuring Equipment And Test Equipment
  • Programmable Controller
  • Household Appliances For Europe

Part Number List

Results 36
Models table for series PF Series Relays
Part No.DatasheetRated Coil VoltageContact ArrangementContact MaterialProtective ConstructionOperating Function Terminal TypeRelay Shape Packing QuantityPacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Operate Voltage (@20oC)Release Voltage (at20°C) Rated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage (at 20°C 68°F)Contact ShapeContact Resistance (Initial)Contact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilOperate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)Mechanical LifeConditionsWeight (Typ.)Resistive Load
APF10206
6 V DC
1 Form A
AgNi type
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
28.3 mA
212 Ω
170 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
Min. 50x103 ope. 6 A 250 V AC
APF10218
18 V DC
1 Form A
AgNi type
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
9.4 mA
1,906 Ω
170 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
Min. 50x103 ope. 6 A 250 V AC
APF10224
24 V DC
1 Form A
AgNi type
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
7.1 mA
3,388 Ω
170 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
Min. 50x103 ope. 6 A 250 V AC
APF10209
9 V DC
1 Form A
AgNi type
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
18.9 mA
476 Ω
170 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
Min. 50x103 ope. 6 A 250 V AC
APF10305
5 V DC
1 Form A
AgNi type/Au-plated
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
34.0 mA
147 Ω
170 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
1 mA 1 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
Min. 50x103 ope. 6 A 250 V AC
APF10306
6 V DC
1 Form A
AgNi type/Au-plated
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
28.3 mA
212 Ω
170 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
1 mA 1 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
Min. 50x103 ope. 6 A 250 V AC
APF10348
48 V DC
1 Form A
AgNi type/Au-plated
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
4.5 mA
10,618 Ω
217 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
1 mA 1 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
Min. 50x103 ope. 6 A 250 V AC
APF30205
5 V DC
1 Form C
AgNi type
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
34.0 mA
147 Ω
170 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
49 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
N.O.: Min. 50x103 ope. 6 A 250 V AC
N.C.: Min. 30x103 ope. 6 A 250 V AC
APF30209
9 V DC
1 Form C
AgNi type
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
18.9 mA
476 Ω
170 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
49 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
N.O.: Min. 50x103 ope. 6 A 250 V AC
N.C.: Min. 30x103 ope. 6 A 250 V AC
APF10312
12 V DC
1 Form A
AgNi type/Au-plated
Sealed
Single side stable
PC board terminal
Slim type
Tube package
20
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
14.2 mA
847 Ω
170 mW
120% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
6 A 250 V AC
1,500 VA
250 V AC
6 A (AC)
1 mA 1 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 8 ms at rated coil voltage (without bounce)
Max. 4 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 11 ms)
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +85°C (Allowable temperature is from -40 to +60°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 5 g
[switching frequency: 6 times/min]
Min. 50x103 ope. 6 A 250 V AC

What's New

Stay up to date

View All
HE Series Power Relay PV Type 90A Wide Gap
Relays & Contactors Icon

HE Series Power Relay PV Type 90A Wide Gap

HE-R Series General Power Relays
Relays & Contactors Icon

HE-R Series General Power Relays

LD-P Series General Power Relays
Relays & Contactors Icon

LD-P Series General Power Relays

LQ Series Non-Polarized General Power Relays
Relays & Contactors Icon

LQ Series Non-Polarized General Power Relays

HE-N Series General Power Relays
Relays & Contactors Icon

HE-N Series General Power Relays

LZ-N Series General Power Relays
Relays & Contactors Icon

LZ-N Series General Power Relays

DJ-H Series Power Latching Relays
Relays & Contactors Icon

DJ-H Series Power Latching Relays

Latest Videos

Playlist

 
Relays & Contactors

New Product Introduction: HE-R Series General Power Relays

Relays & Contactors Icon
Sales and SupportFind the nearest sales rep or distributor
White PapersRegister today to access Panasonic's White Paper Pagoda for technical papers and more!
Download The App
Download from Apple App Store
Download from Google Play Store
Copyright © 2023 Panasonic Corporation of North America. All Rights Reserved.