The PQ Series Relays are being discontinued. Please consult Panasonic Product Discontinuation Notice For JT-N, JT-V, LK-P, LK-T, JS, JS-M, JQ, PQ, LE, RE Series Relays PDN.PG0006-PG0002.3.15.2021 for Affected Part Numbers. 

PQ Series Relays

Part number list

Results 7
Models table for series PQ Series Relays
Part No.DatasheetRated Coil VoltageProtective ConstructionOperating Function Terminal TypeAccessoriesPacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Operate Voltage (@20oC)Release Voltage (at20°C) Rated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage Contact ArrangementContact ShapeContact Resistance (Initial)Contact MaterialContact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilOperate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)Mechanical LifeConditionsWeight (Typ.)Resistive Load
3 V DC
Sealed
Single side stable
PC board terminal
Sockets are available.
100
500
Max. 75% V of Rated coil voltage (initial)
Min. 5% V of Rated coil voltage (initial)
66.7 mA
45 Ω
200 mW
130% V of Rated coil voltage (at 70°C)
180% V of Rated coil voltage (at 20°C)
1 Form A
Twin
Max. 50 mΩ (by voltage drop 6 V DC 1 A)
Au-clad AgNi type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 110 V DC (0.3 A)
5 A (AC,DC)
100 µA 100m V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
8,000 V
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
294 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.0 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Min. 2x107 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 7 g
Min. 200,000 ope. 5 A 125 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 250 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 30 V DC (at 20 times/min.)
6 V DC
Sealed
Single side stable
PC board terminal
Sockets are available.
100
500
Max. 75% V of Rated coil voltage (initial)
Min. 5% V of Rated coil voltage (initial)
33.3 mA
180 Ω
200 mW
130% V of Rated coil voltage (at 70°C)
180% V of Rated coil voltage (at 20°C)
1 Form A
Twin
Max. 50 mΩ (by voltage drop 6 V DC 1 A)
Au-clad AgNi type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 110 V DC (0.3 A)
5 A (AC,DC)
100 µA 100m V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
8,000 V
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
294 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.0 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Min. 2x107 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 7 g
Min. 200,000 ope. 5 A 125 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 250 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 30 V DC (at 20 times/min.)
12 V DC
Sealed
Single side stable
PC board terminal
Sockets are available.
100
500
Max. 75% V of Rated coil voltage (initial)
Min. 5% V of Rated coil voltage (initial)
16.7 mA
720 Ω
200 mW
130% V of Rated coil voltage (at 70°C)
180% V of Rated coil voltage (at 20°C)
1 Form A
Twin
Max. 50 mΩ (by voltage drop 6 V DC 1 A)
Au-clad AgNi type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 110 V DC (0.3 A)
5 A (AC,DC)
100 µA 100m V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
8,000 V
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
294 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.0 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Min. 2x107 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 7 g
Min. 200,000 ope. 5 A 125 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 250 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 30 V DC (at 20 times/min.)
24 V DC
Sealed
Single side stable
PC board terminal
Sockets are available.
100
500
Max. 75% V of Rated coil voltage (initial)
Min. 5% V of Rated coil voltage (initial)
8.3 mA
2,880 Ω
200 mW
130% V of Rated coil voltage (at 70°C)
180% V of Rated coil voltage (at 20°C)
1 Form A
Twin
Max. 50 mΩ (by voltage drop 6 V DC 1 A)
Au-clad AgNi type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 110 V DC (0.3 A)
5 A (AC,DC)
100 µA 100m V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
8,000 V
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
294 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.0 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Min. 2x107 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 7 g
Min. 200,000 ope. 5 A 125 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 250 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 30 V DC (at 20 times/min.)
18 V DC
Sealed
Single side stable
PC board terminal
Sockets are available.
100
500
Max. 75% V of Rated coil voltage (initial)
Min. 5% V of Rated coil voltage (initial)
11.1 mA
1,620 Ω
200 mW
130% V of Rated coil voltage (at 70°C)
180% V of Rated coil voltage (at 20°C)
1 Form A
Twin
Max. 50 mΩ (by voltage drop 6 V DC 1 A)
Au-clad AgNi type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 110 V DC (0.3 A)
5 A (AC,DC)
100 µA 100m V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
8,000 V
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
294 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.0 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Min. 2x107 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 7 g
Min. 200,000 ope. 5 A 125 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 250 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 30 V DC (at 20 times/min.)
9 V DC
Sealed
Single side stable
PC board terminal
Sockets are available.
100
500
Max. 75% V of Rated coil voltage (initial)
Min. 5% V of Rated coil voltage (initial)
22.2 mA
405 Ω
200 mW
130% V of Rated coil voltage (at 70°C)
180% V of Rated coil voltage (at 20°C)
1 Form A
Twin
Max. 50 mΩ (by voltage drop 6 V DC 1 A)
Au-clad AgNi type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 110 V DC (0.3 A)
5 A (AC,DC)
100 µA 100m V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
8,000 V
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
294 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.0 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Min. 2x107 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 7 g
Min. 200,000 ope. 5 A 125 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 250 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 30 V DC (at 20 times/min.)
5 V DC
Sealed
Single side stable
PC board terminal
Sockets are available.
100
500
Max. 75% V of Rated coil voltage (initial)
Min. 5% V of Rated coil voltage (initial)
40 mA
125 Ω
200 mW
130% V of Rated coil voltage (at 70°C)
180% V of Rated coil voltage (at 20°C)
1 Form A
Twin
Max. 50 mΩ (by voltage drop 6 V DC 1 A)
Au-clad AgNi type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 110 V DC (0.3 A)
5 A (AC,DC)
100 µA 100m V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
8,000 V
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
294 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.0 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Min. 2x107 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 7 g
Min. 200,000 ope. 5 A 125 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 250 V AC (at 20 times/min.)
Min. 100,000 ope. 5 A 30 V DC (at 20 times/min.)
Latest Videos

Playlist

Thumbnail for Panasonic Industrial Solutions for 5G Networking Applications

Panasonic Industrial Solutions for 5G Networking Applications

Thumbnail for New Product Spotlight: DW Series Relays

New Product Spotlight: DW Series Relays

Thumbnail for New Product Spotlight: PA-N Series General Power Relays

New Product Spotlight: PA-N Series General Power Relays

Thumbnail for New Product Introduction: HE-R Series General Power Relays

New Product Introduction: HE-R Series General Power Relays

Thumbnail for New Product Introduction: HE Series Power Relay PV Type 90A Wide Gap

New Product Introduction: HE Series Power Relay PV Type 90A Wide Gap

Thumbnail for New Product Introduction: DS-P Series

New Product Introduction: DS-P Series

Thumbnail for New Product Information: LQ Series Relays

New Product Information: LQ Series Relays