| | Single side stable | 12 V DC | 4 Form A | Flux-resistant | PC board terminal | Carton | 10 | 50 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 333 mA | 36.0 Ω | 4,000 mW Holding: 490 mW | (at 55°C) 110% V of rated coil voltage | Max. 10 mΩ (by voltage drop 6 V DC 20 A after 3 min.) Max. 3 mΩ (by voltage drop 6 V DC 50 A, reference value) | AgSnO_{2} type | 40 A 480 V AC | 19,200 VA | 480 V AC | 50 A | 100 mA 24 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 35 to 110% V (at -40 to +55°C, Form A contact: 50 A) 35 to 50% V (at -40 to +85°C, Form A contact: 40 A to 50 A) | Max. 50 ms at rated coil voltage (without bounce) | Max. 30 ms at rated coil voltage (without bounce, without diode) | 25 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 0.3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 100x10^{3} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +55°C (When applied coil hold voltage is 35 to 110 % V of rated coil voltage.)
Ambient temperature: -40 to +85°C (When applied coil hold voltage is 35 to 50 % V of rated coil voltage or storage.)
Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 180g | [switching frequency ON : OFF = 1 s : 9 s] Min. 30x10^{3} ope. 40 A 480 V AC Min. 50x10^{3} ope. 32 A 277 V AC |

| | Single side stable | 24 V DC | 2 Form A 1 Form B | Flux-resistant | PC board terminal | Carton | 10 | 50 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 167 mA | 144.0 Ω | 4,000 mW Holding: 490 mW | (at 55°C) 110% V of rated coil voltage | Form A contact: Max. 10 mΩ (by voltage drop 6 V DC 80 A after 3 min.) Max. 3 mΩ (by voltage drop 6 V DC 50 A, reference value) Form B contact: Max. 100 mΩ (by voltage drop 6 V DC 1 A) | Form A contact: AgNi type Form B contact: Au planted AgNi type | Form A contact: 80 A 277 V AC Form B contact: 1 A 277 V AC, 0.5 A 30 V DC | Form A contact: 22,160 VA Form B contact: 277 VA, 15 W | Form A contact: 277 V AC Form B contact: 277 V AC, 30 V DC | Form A contact: 80 A Form B contact: 1 A | Form A contact: 100 mA 24 V DC Form B contact: 10 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) 2,500 V (Between Form B contact and coil) | 35 to 110% V (at -40 to +55°C, Form A contact: 80 A) 35 to 50% V (at -40 to +85°C, Form A contact: 70 A to 80 A) | Max. 50 ms at rated coil voltage (without bounce) | Max. 30 ms at rated coil voltage (without bounce, without diode) | 25 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 0.3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 100x10^{3} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +55°C (When applied coil hold voltage is 35 to 110 % V of rated coil voltage.)
Ambient temperature: -40 to +85°C (When applied coil hold voltage is 35 to 50 % V of rated coil voltage or storage.)
Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 180g | [switching frequency ON : OFF = 1 s : 9 s] Form A contact: Min. 50x10^{3} ope. 63 A 277 V AC Min. 30x10^{3} ope. 70 A 277 V AC Min. 10x10^{3} ope. 80 A 277 V AC Form B contact: Min. 100x10^{3} ope. 0.5 A 30 V DC Min. 100x10^{3} ope. 1 A 277 V AC |

| | Single side stable | 24 V DC | 4 Form A 1 Form B | Flux-resistant | PC board terminal | Carton | 10 | 50 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 167 mA | 144.0 Ω | 4,000 mW Holding: 490 mW | (at 55°C) 110% V of rated coil voltage | Form A contact: Max. 10 mΩ (by voltage drop 6 V DC 20 A after 3 min.) Max. 3 mΩ (by voltage drop 6 V DC 50 A, reference value) Form B contact: Max. 100 mΩ (by voltage drop 6 V DC 1 A) | Form A contact: AgSnO_{2} type Form B contact: Au-planted AgNi type | Form A contact: 40 A 480 V AC Form B contact: 1 A 277 V AC, 0.5 A 30 V DC | Form A contact: 19,200 VA Form B contact: 277 VA, 15 W | Form A contact: 480 V AC Form B contact: 277 V AC, 30 V DC | Form A contact: 50 A Form B contact: 1 A | Form A contact: 100 mA 24 V DC Form B contact: 10 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) 2,500 V (Between Form B contact and coil) | 35 to 110% V (at -40 to +55°C, Form A contact: 50 A) 35 to 50% V (at -40 to +85°C, Form A contact: 40 A to 50 A) | Max. 50 ms at rated coil voltage (without bounce) | Max. 30 ms at rated coil voltage (without bounce, without diode) | 25 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 0.3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 100x10^{3} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +55°C (When applied coil hold voltage is 35 to 110 % V of rated coil voltage.)
Ambient temperature: -40 to +85°C (When applied coil hold voltage is 35 to 50 % V of rated coil voltage or storage.)
Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 180g | [switching frequency ON : OFF = 1 s : 9 s] Form A contact: Min. 30x10^{3} ope. 40 A 480 V AC Min. 50x10^{3} ope. 32 A 277 V AC Form B contact: Min. 100x10^{3} ope. 1 A 277 V AC Min. 100x10^{3} ope. 0.5 A 30 V DC |

| | Single side stable | 24 V DC | 2 Form A | Flux-resistant | PC board terminal | Carton | 10 | 50 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 167 mA | 144.0 Ω | 4,000 mW Holding: 490 mW | (at 55°C) 110% V of rated coil voltage | Max. 10 mΩ (by voltage drop 6 V DC 20 A after 3 min.) Max. 3 mΩ (by voltage drop 6 V DC 80 A, reference value) | AgNi type | 80 A 277 V AC | 22,160 VA | 277 V AC | 80 A | 100 mA 24 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 35 to 110% V (at -40 to +55°C, Form A contact: 80 A) 35 to 50% V (at -40 to +85°C, Form A contact: 70 A to 80 A) | Max. 50 ms at rated coil voltage (without bounce) | Max. 30 ms at rated coil voltage (without bounce, without diode) | 25 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 0.3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 100x10^{3} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +55°C (When applied coil hold voltage is 35 to 110 % V of rated coil voltage.)
Ambient temperature: -40 to +85°C (When applied coil hold voltage is 35 to 50 % V of rated coil voltage or storage.)
Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 180g | [switching frequency ON : OFF = 1 s : 9 s] Min. 50x10^{3} ope. 63 A 277 V AC Min. 30x10^{3} ope. 70 A 277 V AC Min. 10x10^{3} ope. 80 A 277 V AC |

| | Single side stable | 12 V DC | 2 Form A | Flux-resistant | PC board terminal | Carton | 10 | 50 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 333 mA | 36.0 Ω | 4,000 mW Holding: 490 mW | (at 55°C) 110% V of rated coil voltage | Max. 10 mΩ (by voltage drop 6 V DC 20 A after 3 min.) Max. 3 mΩ (by voltage drop 6 V DC 80 A, reference value) | AgNi type | 80 A 277 V AC | 22,160 VA | 277 V AC | 80 A | 100 mA 24 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 35 to 110% V (at -40 to +55°C, Form A contact: 80 A) 35 to 50% V (at -40 to +85°C, Form A contact: 70 A to 80 A) | Max. 50 ms at rated coil voltage (without bounce) | Max. 30 ms at rated coil voltage (without bounce, without diode) | 25 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 0.3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 100x10^{3} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +55°C (When applied coil hold voltage is 35 to 110 % V of rated coil voltage.)
Ambient temperature: -40 to +85°C (When applied coil hold voltage is 35 to 50 % V of rated coil voltage or storage.)
Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 180g | [switching frequency ON : OFF = 1 s : 9 s] Min. 50x10^{3} ope. 63 A 277 V AC Min. 30x10^{3} ope. 70 A 277 V AC Min. 10x10^{3} ope. 80 A 277 V AC |

| | Single side stable | 12 V DC | 2 Form A 1 Form B | Flux-resistant | PC board terminal | Carton | 10 | 50 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 333 mA | 36.0 Ω | 4,000 mW Holding: 490 mW | (at 55°C) 110% V of rated coil voltage | Form A contact: Max. 10 mΩ (by voltage drop 6 V DC 80 A after 3 min.) Max. 3 mΩ (by voltage drop 6 V DC 50 A, reference value) Form B contact: Max. 100 mΩ (by voltage drop 6 V DC 1 A) | Form A contact: AgNi type Form B contact: Au planted AgNi type | Form A contact: 80 A 277 V AC Form B contact: 1 A 277 V AC, 0.5 A 30 V DC | Form A contact: 22,160 VA Form B contact: 277 VA, 15 W | Form A contact: 277 V AC Form B contact: 277 V AC, 30 V DC | Form A contact: 80 A Form B contact: 1 A | Form A contact: 100 mA 24 V DC Form B contact: 10 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) 2,500 V (Between Form B contact and coil) | 35 to 110% V (at -40 to +55°C, Form A contact: 80 A) 35 to 50% V (at -40 to +85°C, Form A contact: 70 A to 80 A) | Max. 50 ms at rated coil voltage (without bounce) | Max. 30 ms at rated coil voltage (without bounce, without diode) | 25 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 0.3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 100x10^{3} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +55°C (When applied coil hold voltage is 35 to 110 % V of rated coil voltage.)
Ambient temperature: -40 to +85°C (When applied coil hold voltage is 35 to 50 % V of rated coil voltage or storage.)
Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 180g | [switching frequency ON : OFF = 1 s : 9 s] Form A contact: Min. 50x10^{3} ope. 63 A 277 V AC Min. 30x10^{3} ope. 70 A 277 V AC Min. 10x10^{3} ope. 80 A 277 V AC Form B contact: Min. 100x10^{3} ope. 0.5 A 30 V DC Min. 100x10^{3} ope. 1 A 277 V AC |

| | Single side stable | 24 V DC | 4 Form A | Flux-resistant | PC board terminal | Carton | 10 | 50 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 167 mA | 144.0 Ω | 4,000 mW Holding: 490 mW | (at 55°C) 110% V of rated coil voltage | Max. 10 mΩ (by voltage drop 6 V DC 20 A after 3 min.) Max. 3 mΩ (by voltage drop 6 V DC 50 A, reference value) | AgSnO_{2} type | 40 A 480 V AC | 19,200 VA | 480 V AC | 50 A | 100 mA 24 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 35 to 110% V (at -40 to +55°C, Form A contact: 50 A) 35 to 50% V (at -40 to +85°C, Form A contact: 40 A to 50 A) | Max. 50 ms at rated coil voltage (without bounce) | Max. 30 ms at rated coil voltage (without bounce, without diode) | 25 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 0.3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 100x10^{3} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +55°C (When applied coil hold voltage is 35 to 110 % V of rated coil voltage.)
Ambient temperature: -40 to +85°C (When applied coil hold voltage is 35 to 50 % V of rated coil voltage or storage.)
Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 180g | [switching frequency ON : OFF = 1 s : 9 s] Min. 30x10^{3} ope. 40 A 480 V AC Min. 50x10^{3} ope. 32 A 277 V AC |

| | Single side stable | 12 V DC | 4 Form A 1 Form B | Flux-resistant | PC board terminal | Carton | 10 | 50 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 333 mA | 36.0 Ω | 4,000 mW Holding: 490 mW | (at 55°C) 110% V of rated coil voltage | Form A contact: Max. 10 mΩ (by voltage drop 6 V DC 20 A after 3 min.) Max. 3 mΩ (by voltage drop 6 V DC 50 A, reference value) Form B contact: Max. 100 mΩ (by voltage drop 6 V DC 1 A) | Form A contact: AgSnO_{2} type Form B contact: Au planted AgNi type | Form A contact: 40 A 480 V AC Form B contact: 1 A 277 V AC, 0.5 A 30 V DC | Form A contact: 19,200 VA Form B contact: 277 VA, 15 W | Form A contact: 480 V AC Form B contact: 277 V AC, 30 V DC | Form A contact: 50 A Form B contact: 1 A | Form A contact: 100 mA 24 V DC Form B contact: 10 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) 2,500 V (Between Form B contact and coil) | 35 to 110% V (at -40 to +55°C, Form A contact: 50 A) 35 to 50% V (at -40 to +85°C, Form A contact: 40 A to 50 A) | Max. 50 ms at rated coil voltage (without bounce) | Max. 30 ms at rated coil voltage (without bounce, without diode) | 25 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 0.3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 100x10^{3} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +55°C (When applied coil hold voltage is 35 to 110 % V of rated coil voltage.)
Ambient temperature: -40 to +85°C (When applied coil hold voltage is 35 to 50 % V of rated coil voltage or storage.)
Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 180g | [switching frequency ON : OFF = 1 s : 9 s] Form A contact: Min. 30x10^{3} ope. 40 A 480 V AC Min. 50x10^{3} ope. 32 A 277 V AC Form B contact: Min. 100x10^{3} ope. 1 A 277 V AC Min. 100x10^{3} ope. 0.5 A 30 V DC |