Specifications

Specifications table for model ADJH21124
ItemPerformance characteristics
Operating Function 1 coil latching
Type ClassificationManual switch type
Rated Coil Voltage24 V DC
Protective ConstructionFlux-resistant
Terminal TypePC board terminal
Packing Quantity; Inner Carton (Pcs.) 50
Packing Quantity; Outer Carton (Pcs.)200
Set Voltage Max. 75% V of rated coil voltage (Initial)
Reset VoltageMax. 75% V of rated coil voltage (Initial)
Rated Operating Current [±10%] (at 20°C)Set coil: 41.7 mA
Reset coil: 41.7 mA
Resistance [±10%] (at 20°C) Set coil: 576 Ω
Reset coil: 576 Ω
Rated Operating Power 1,000 mW
Max. Allowable Voltage (at 20°C 68°F)130% V of rated coil voltage
Contact Arrangement1 Form A
Contact ShapeSingle
Contact Resistance (Initial)Max. 20 mΩ (by voltage drop 24 V DC 1 A)
Contact MaterialAgSnO2 type
Contact Rating (Resistive Load)50 A 277 V AC
Max. Switching Power (Resistive Load) 13,850 VA (50 A 277 V AC)
Max. Switching Voltage480 V AC
Max. Switching Current50 A (AC)
Min. Switching Load (Reference Value) 100 mA 5 V DC
Insulation Resistance (Initial)Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric Strength (Initial): Between Open Contacts1,500 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact and Coil4,000 Vrms for 1 min (detection current: 10 mA)
Surge Withstand Voltage (Initial): Between Contact and Coil12,000 V
Time (Initial) (at 20°C 68°F) (Initial) Max. 20 ms at rated coil voltage (without bounce)
Reset Time (Initial) (at20°C 68°F) Max. 20 ms at rated coil voltage (without bounce)
Hock Resistance (Functional)100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
Hock Resistance (Destructive)1,000 m/s2 (half-sine shock pulse: 6 ms)
Vibration Resistance (Functional)10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)
Vibration Resistance (Destructive)10 to 55 Hz (at double amplitude of 2 mm)
Mechanical LifeMin. 106 ope. (switching frequency: at 180 times/min)
ConditionsAmbient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Weight (Typ.)Approx. 31 g
Resistive Load[switching frequency ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 25 A 277 V AC
Min. 10x103 ope. 50 A 277 V AC
Inrush Load; Tungsten[switching frequency ON : OFF = 1 s : 59 s]
Min. 25x103 ope. 2,400 W 120 V AC
Inrush Load; Electronic Ballast [switching frequency ON : OFF = 1 s : 9 s]
Min. 6x103 ope. 20 A 277 V AC
Inrush Load; Capacitive (IEC 60669-1)[switching frequency ON : OFF = 1 s : 9 s]
Min. 30x103 ope. 20 A 250 V AC 200 μF

Stock check

Model image for ADJH21124

ADJH21124

Resources

Filter by:
Showing 1 to 7 of 7 results
Results7
Latest Videos

Playlist

Thumbnail for Why Should A Relay Meet The New NEMA 410 Standard? (S1 E1)

Why Should A Relay Meet The New NEMA 410 Standard? (S1 E1)

Thumbnail for Smart Grid Products: LF-G Series Power Relays

Smart Grid Products: LF-G Series Power Relays

Thumbnail for Smart Grid Products: HE-V Series Power Relays

Smart Grid Products: HE-V Series Power Relays

Thumbnail for Features and Benefits of PhotoMOS®

Features and Benefits of PhotoMOS®

Thumbnail for Introduction to PhotoMOS®

Introduction to PhotoMOS®

Thumbnail for Where Technology Meets Humanity

Where Technology Meets Humanity

Thumbnail for Panasonic Industrial Solutions for 5G Networking Applications

Panasonic Industrial Solutions for 5G Networking Applications

Thumbnail for New Product Spotlight: DW Series Relays

New Product Spotlight: DW Series Relays

Thumbnail for New Product Spotlight: PhotoMOS® HE 1 Form A and HE SOP 1 Form A Series Relays

New Product Spotlight: PhotoMOS® HE 1 Form A and HE SOP 1 Form A Series Relays

Thumbnail for New Product Spotlight: PA-N Series General Power Relays

New Product Spotlight: PA-N Series General Power Relays