ADW1224HLW

Specifications

Specifications table for model ADW1224HLW
Item	Performance characteristics
Operating Function	2 coil latching
Contact Type	Inrush type (16A, Inrush current 100A)
Type Classification	Low profile type
Rated Coil Voltage	24 V DC
Protective Construction	Flux-resistant
Terminal Type	PC board terminal
Packing Quantity; Inner Carton (Pcs.)	100
Packing Quantity; Outer Carton (Pcs.)	500
Set Voltage	Max. 80% V of rated coil voltage (Initial)
Reset Voltage	Max. 80% V of rated coil voltage (Initial)
Rated Operating Current [±10%] (at 20°C)	Set coil: 16.7 mA Reset coil: 16.7 mA
Resistance [±10%] (at 20°C)	Set coil: 1,440 Ω Reset coil: 1,440 Ω
Rated Operating Power	400 mW
Max. Allowable Voltage (at 20°C 68°F)	110% V of rated coil voltage
Contact Arrangement	1 Form A
Contact Shape	Single
Contact Resistance (Initial)	Max. 100 mΩ (by voltage drop 6 V DC 1 A)
Contact Material	AgSnO₂ type
Contact Rating (Resistive Load)	16 A 277 V AC
Max. Switching Power (Resistive Load)	4,432 VA
Max. Switching Voltage	277 V AC
Max. Switching Current	16 A (AC)
Min. Switching Load (Reference Value)	100 mA 5 V DC
Insulation Resistance (Initial)	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric Strength (Initial): Between Open Contacts	1,000 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact and Coil	5,000 Vrms for 1 min (detection current: 10 mA)
Surge Withstand Voltage (Initial): Between Contact and Coil	12,000 V
Time (Initial) (at 20°C 68°F) (Initial)	Max. 15 ms at rated coil voltage (without bounce)
Reset Time (Initial) (at20°C 68°F)	Max. 15 ms at rated coil voltage (without bounce)
Hock Resistance (Functional)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)
Hock Resistance (Destructive)	1,000 m/s² (half-sine shock pulse: 6 ms)
Vibration Resistance (Functional)	10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 μs)
Vibration Resistance (Destructive)	10 to 55 Hz (at double amplitude of 3 mm)
Mechanical Life	Min. 10⁶ ope. (switching frequency: at 180 times/min)
Conditions	Ambient temperature: -40 to +70℃ (Over 8A to 16A) Ambient temperature: -40 to +85℃ (8A or less) Humidity: 5 to 85% RH (Avoid icing and condensation)
Weight (Typ.)	Approx. 7.5 g
Resistive Load	Min. 50x10³ ope. 8 A 250 V AC (switching frequency: 20 times/min) Min. 20x10³ ope. 16 A 277 V AC (switching frequency ON : OFF = 1 s : 5 s)
Inrush Load; Tungsten	Min. 25x10³ ope. Inrush current: 100 A 600 W 120 V AC (switching frequency ON : OFF = 1 s : 59 s)
Packing Quantity	Carton