Specifications

Specifications table for model HE1aN-W-DC24V-Y6
ItemPerformance characteristics
Contact Gap3.0mm
Rated Coil Voltage24 V DC
Contact Arrangement1 Form A
Max. Switching Current60 A (AC), 90 A (DC)
Protective ConstructionFlux-resistant
Operating Function Single side stable
Terminal TypePC board terminal (wide blade)
Contact Type90 A
Packing Quantity; Inner Carton (Pcs.) 25
Packing Quantity; Outer Carton (Pcs.)100
Operate Voltage (@20oC)Max. 70% V of rated coil voltage (Initial)
Release Voltage (at20°C) Min. 10% V of rated coil voltage (Initial)
Rated Operating Current [±10%] (at 20°C)80 mA
Resistance [±10%] (at 20°C) 300 Ω
Rated Operating Power 1,920 mW
Max. Allowable Voltage (at 20°C 68°F)110% V of rated coil voltage
Contact ShapeSingle
Contact Resistance (Initial)Max. 10 mΩ (by voltage drop 5 V DC 20 A)
Max. 3 mΩ (by voltage drop 5 V DC 90 A, reference value)
Contact MaterialAgNi type
Contact Rating (Resistive Load)60 A 490 V AC, 90 A 60 V DC
Max. Switching Power (Resistive Load) 29,400 VA (AC), 5,400 W (DC)
Max. Switching Voltage490 V AC, 60 V DC
Min. Switching Load (Reference Value) 100 mA 5 V DC
Insulation Resistance (Initial)Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric Strength (Initial): Between Contact and Coil5,000 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Open Contacts2,000 Vrms for 1 min (detection current: 10 mA)
Surge Withstand Voltage (Initial): Between Contact and Coil10,000 V
Coil Holding Voltage40 to 100% V (at -50~55℃)
50 to 60% V (at 55~85℃)
Operate Time (Initial) (At 20oC)Max. 30 ms at rated coil voltage (without bounce)
Release Time (Initial) (at 20°C) Max. 10 ms at rated coil voltage (without bounce, without diode)
Hock Resistance (Functional)98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
Hock Resistance (Destructive)980 m/s2 (half-sine shock pulse: 6 ms)
Vibration Resistance (Functional)10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 μs)
Vibration Resistance (Destructive)10 to 55 Hz (at double amplitude of 1.5 mm)
Mechanical LifeMin. 106 ope. (switching frequency: at 180 times/min)
ConditionsAmbient temperature: -50 to +85℃
(When using at 55℃ or higher, the coil holding voltage should be 50% V to 60% V)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Weight (Typ.)Approx. 85 g
Resistive Load[at 85℃, switching frequency ON : OFF = 1 s : 9 s]
Min. 10x103 ope. 60 A 277 V AC
Min. 103 ope. 90 A 277 V AC
Min. 103 ope. 90 A 60 V DC

[room temperature, switching frequency ON : OFF = 1 s : 9 s]
Min. 10x103 ope. 60 A 490 V AC
Min. 10x103 ope. 80 A 277 V AC
Min. 10x103 ope. 80 A 48 V DC
Packing QuantityCarton

Stock check

Model image for HE1aN-W-DC24V-Y6

HE1aN-W-DC24V-Y6

Latest Videos

Playlist

Thumbnail for Why Should A Relay Meet The New NEMA 410 Standard? (S1 E1)

Why Should A Relay Meet The New NEMA 410 Standard? (S1 E1)

Thumbnail for Smart Grid Products: LF-G Series Power Relays

Smart Grid Products: LF-G Series Power Relays

Thumbnail for Smart Grid Products: HE-V Series Power Relays

Smart Grid Products: HE-V Series Power Relays

Thumbnail for Features and Benefits of PhotoMOS®

Features and Benefits of PhotoMOS®

Thumbnail for Introduction to PhotoMOS®

Introduction to PhotoMOS®

Thumbnail for Where Technology Meets Humanity

Where Technology Meets Humanity

Thumbnail for Panasonic Industrial Solutions for 5G Networking Applications

Panasonic Industrial Solutions for 5G Networking Applications

Thumbnail for New Product Spotlight: DW Series Relays

New Product Spotlight: DW Series Relays

Thumbnail for New Product Spotlight: PhotoMOS® HE 1 Form A and HE SOP 1 Form A Series Relays

New Product Spotlight: PhotoMOS® HE 1 Form A and HE SOP 1 Form A Series Relays

Thumbnail for New Product Spotlight: PA-N Series General Power Relays

New Product Spotlight: PA-N Series General Power Relays