Panasonic RJ Series Relays are high frequency Signal Relays with a Double Pole Double Throw (2 Form C) contact arrangement with 50 Ohm Impedance matching and can switch up to 8GHz transmission signal.

The RJ Series Relays are available in both Through-Hole and Surface Mount terminal options and have dimensions that are 14.0 x 9.0 x 8.2mm.

RJ Series Relays are also available with a single-side stable type and 2-coil latching operation. In order to achieve excellent high frequency characteristics, Panasonic High Frequency Relays have a unique contact-point structure that is different from that of General Purpose Signal Relays. The contact point of Panasonic High Frequency Relays is surrounded by a metal shield plate that is connected to multiple earth terminals which would be connected to ground on the PC Board. The contact points are designed as a double-break. When the contact point is OFF, the contact spring will touch with the shield plate. The adoption of this complicated structure is what ensures excellent electrical isolation.

Microwave devices are essential components for switching high frequency signals in measuring instruments, mobile phone base stations and radios. In measurement equipment such as oscilloscopes and spectrum analyzers, these Relays are able to control high frequency signals for transmitting and receiving circuits as well as fulfilling the long life requirements of these devices. For mobile base stations, High Frequency Relays can be used to switch in a redundant circuit for the tower mounted amplifier in case a power loss occurs. In wireless LAN applications, Relays can be used to switch the transmitting and receiving signal of a ZigBee Module or other transceiver device.

Series image for RJ Series Relays

RJ Series Relays

Part number list

Results 32
Models table for series RJ Series Relays
Part No.DatasheetTerminal TypeCoil VoltagePacking QuantityOperating Function Protective ConstructionRated operating powerPick-Up VoltageDrop-Out VoltageContact ArrangementContact MaterialContact RatingIsolationInsertion (Without D.U.T Board's Loss) V.S.W.RExpected Life: MechanicalExpected Life: ElectricalBreakdown Voltage (Contact-Contact) (Initial)Breakdown Voltage (Initial) : Between Contact And CoilAmbient TemperatureSet Voltage Reset Voltage
Standard PC board terminal
3V DC
Tube packing
Single Side Stable Type
Sealed Type
200mW
75%V or less of rated voltage(Initial)
10%V or more of rated voltage(Initial)
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C
Standard PC board terminal
12V DC
Tube packing
Single Side Stable Type
Sealed Type
200mW
75%V or less of rated voltage(Initial)
10%V or more of rated voltage(Initial)
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C
Surface-mount terminal
24V DC
Tape and reel packing (X)
Single Side Stable Type
Sealed Type
200mW
75%V or less of rated voltage(Initial)
10%V or more of rated voltage(Initial)
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C
Surface-mount terminal
12V DC
Tape and reel packing (Z)
Single Side Stable Type
Sealed Type
200mW
75%V or less of rated voltage(Initial)
10%V or more of rated voltage(Initial)
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C
Surface-mount terminal
12V DC
Tube packing
Single Side Stable Type
Sealed Type
200mW
75%V or less of rated voltage(Initial)
10%V or more of rated voltage(Initial)
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C
Standard PC board terminal
3V DC
Tube packing
2 Coil Latching Type
Sealed Type
150mW
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C
75%V or less of rated voltage(Initial)
75%V or less of rated voltage(Initial)
Surface-mount terminal
3V DC
Tape and reel packing (X)
Single Side Stable Type
Sealed Type
200mW
75%V or less of rated voltage(Initial)
10%V or more of rated voltage(Initial)
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C
Standard PC board terminal
4.5V DC
Tube packing
Single Side Stable Type
Sealed Type
200mW
75%V or less of rated voltage(Initial)
10%V or more of rated voltage(Initial)
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C
Standard PC board terminal
12V DC
Tube packing
2 Coil Latching Type
Sealed Type
150mW
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C
75%V or less of rated voltage(Initial)
75%V or less of rated voltage(Initial)
Surface-mount terminal
3V DC
Tube packing
Single Side Stable Type
Sealed Type
200mW
75%V or less of rated voltage(Initial)
10%V or more of rated voltage(Initial)
2 Form C
Au
1W (at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25) 10mA 10V DC
Between open contacts: Min. 35dB
Between contact sets: Min. 30dB
Max. 0.5 dB (without D.U.T. board's loss)
Max. 1.25
1x10^7
106 (at 20 cpm) (1W at 5 GHz, 50Ω, V.S.W.R. ≦ 1.25)
106 10mA 10V DC (Resistive load)
500Vrms
500Vrms
-30°C to +70°C