RA Series Relays

Panasonic RA Series Relays are High Frequency Signal Relays with a Double Pole Double Throw (2FormC) contact arrangement with 50 Ohm Impedance matching options which can switch up to 1GHz transmission signal and 3 Watt carrying power. This Relay is available as a surface mount device and has dimensions that are (14.7 x 9.7 x 5.9) mm. This series is also available with a single-side stable type as well as both 1-coil and 2-coil latching operation types.

In order to achieve excellent high frequency characteristics, Panasonic RA Series High Frequency Relays have a unique contact-point structure that is different from that of general-purpose Signal Relays. The contact point of Panasonic high frequency relays is surrounded by a metal shield plate that is connected to multiple earth terminals which would be connected to ground on the PC Board. The contact points are designed as a double-break. When the contact point is OFF, the contact spring will touch with the shield plate. The adoption of this complicated structure is what ensures excellent electrical isolation.

Microwave devices are essential components for switching high frequency signals in measuring instruments, mobile phone base stations, and radios. In measurement equipment such as oscilloscopes and spectrum analyzers, these Relays are able to control high frequency signals for transmitting and receiving circuits as well as fulfill the long life requirements of these devices. For mobile base stations, high frequency relays can be used to switch in a redundant circuit for the tower mounted amplifier in case a power loss occurs. In wireless LAN applications, Relays can be used to switch the transmitting and receiving signal of a ZigBee module or other transceiver device.

Features and Benefits

Excellent High Frequency Characteristics (50Ω, up to 1 GHz)
Small Size: 9.7 (W) x 14.7 (L) x 5.9 (H) mm
High Sensitivity: 140 mW Rated Operating Power (Single Side Stable and 2 Coil Latching)

Applications

Communication Equipment
Measurement Equipment

RA Series Relays

Part number list

Results 75

Models table for series RA Series Relays
Part No.	Coil Voltage	Packing Quantity	Operating Function	Protective Construction	Terminal Type	Rated operating power	Pick-Up Voltage	Drop-Out Voltage	Contact Arrangement	Contact Material	Contact Rating	Contact Carrying Power	Isolation	Insertion (Without D.U.T Board's Loss)	V.S.W.R	Expected Life: Mechanical	Expected Life: Electrical	Breakdown Voltage (Contact-Contact) (Initial)	Breakdown Voltage (Initial) : Between Contact And Coil	Ambient Temperature	Figure of Output	Impedance
ARA200A03X	3V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A12X	12V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A05X	5V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A09X	9V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A1HX	1.5V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A05	5V DC	Tube package	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A12	12V DC	Tube package	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A06X	6V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A4H	4.5V DC	Tube package	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A48	48V DC	Tube package	Single Side Stable Type	Sealed Type	Surface-mount terminal	300mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω

Models table for series RA Series Relays
Part No.	Coil Voltage	Packing Quantity	Operating Function	Protective Construction	Terminal Type	Rated operating power	Pick-Up Voltage	Drop-Out Voltage	Contact Arrangement	Contact Material	Contact Rating	Contact Carrying Power	Isolation	Insertion (Without D.U.T Board's Loss)	V.S.W.R	Expected Life: Mechanical	Expected Life: Electrical	Breakdown Voltage (Contact-Contact) (Initial)	Breakdown Voltage (Initial) : Between Contact And Coil	Ambient Temperature	Figure of Output	Impedance
ARA200A03X	3V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A12X	12V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A05X	5V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A09X	9V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A1HX	1.5V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A05	5V DC	Tube package	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A12	12V DC	Tube package	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A06X	6V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A4H	4.5V DC	Tube package	Single Side Stable Type	Sealed Type	Surface-mount terminal	140mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω
ARA200A48	48V DC	Tube package	Single Side Stable Type	Sealed Type	Surface-mount terminal	300mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Ag alloy / Au-clad Ag alloy	Resistive load: 10mA 10V DC, 1A 30V DC	3W (1GHz, 50Ω, V.S.W.R. Max. 1.2)	Between open contacts: Min. 20dB Between contact sets: Min. 30dB	Max. 0.3dB	Max. 1.2	Min. 100 x 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Resistive load, switching frequency at 20 times/min Min. 10x10⁶ope. 10mA 10V DC 100x10³ope. 1A 30V DC	750 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	1GHz	50Ω

Resources

Filter by:

Showing 1 to 10 of 18 results

Results18

What's New

Stay up to date

View All

May 14, 2022

NEW RE (ARE1_C90) Series High Frequency Signal Relays

Relays & Contactors

RA Series Relays

RA Series Relays

Part number list

Resources

New 1 Form A 1 Form B Safety Relays

Stay up to date

NEW RE (ARE1_C90) Series High Frequency Signal Relays