RJ Series Relays

Panasonic RJ Series Relays are high frequency Signal Relays with a Double Pole Double Throw (2 Form C) contact arrangement with 50 Ohm Impedance matching and can switch up to 8GHz transmission signal.

The RJ Series Relays are available in both Through-Hole and Surface Mount terminal options and have dimensions that are 14.0 x 9.0 x 8.2mm.

RJ Series Relays are also available with a single-side stable type and 2-coil latching operation. In order to achieve excellent high frequency characteristics, Panasonic High Frequency Relays have a unique contact-point structure that is different from that of General Purpose Signal Relays. The contact point of Panasonic High Frequency Relays is surrounded by a metal shield plate that is connected to multiple earth terminals which would be connected to ground on the PC Board. The contact points are designed as a double-break. When the contact point is OFF, the contact spring will touch with the shield plate. The adoption of this complicated structure is what ensures excellent electrical isolation.

Microwave devices are essential components for switching high frequency signals in measuring instruments, mobile phone base stations and radios. In measurement equipment such as oscilloscopes and spectrum analyzers, these Relays are able to control high frequency signals for transmitting and receiving circuits as well as fulfilling the long life requirements of these devices. For mobile base stations, High Frequency Relays can be used to switch in a redundant circuit for the tower mounted amplifier in case a power loss occurs. In wireless LAN applications, Relays can be used to switch the transmitting and receiving signal of a ZigBee Module or other transceiver device.

RJ Series Relays

Part number list

Results 32

Models table for series RJ Series Relays
Part No.	Terminal Type	Coil Voltage	Packing Quantity	Operating Function	Protective Construction	Rated operating power	Pick-Up Voltage	Drop-Out Voltage	Contact Arrangement	Contact Material	Contact Rating	Isolation	Insertion (Without D.U.T Board's Loss)	V.S.W.R	Expected Life: Mechanical	Expected Life: Electrical	Breakdown Voltage (Contact-Contact) (Initial)	Breakdown Voltage (Initial) : Between Contact And Coil	Ambient Temperature	Set Voltage	Reset Voltage	Figure of Output	Impedance	Contact Carrying Power
ARJ2012	Standard PC board terminal	12V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ2003	Standard PC board terminal	3V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ204H	Standard PC board terminal	4.5V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A12	Surface-mount terminal	12V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A03	Surface-mount terminal	3V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A03X	Surface-mount terminal	3V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A12Z	Surface-mount terminal	12V DC	Tape and reel packing (Z)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A24X	Surface-mount terminal	24V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ2203	Standard PC board terminal	3V DC	Tube package	2 Coil Latching Type	Sealed Type	150mW			2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A4HX	Surface-mount terminal	4.5V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)

Models table for series RJ Series Relays
Part No.	Terminal Type	Coil Voltage	Packing Quantity	Operating Function	Protective Construction	Rated operating power	Pick-Up Voltage	Drop-Out Voltage	Contact Arrangement	Contact Material	Contact Rating	Isolation	Insertion (Without D.U.T Board's Loss)	V.S.W.R	Expected Life: Mechanical	Expected Life: Electrical	Breakdown Voltage (Contact-Contact) (Initial)	Breakdown Voltage (Initial) : Between Contact And Coil	Ambient Temperature	Set Voltage	Reset Voltage	Figure of Output	Impedance	Contact Carrying Power
ARJ2012	Standard PC board terminal	12V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ2003	Standard PC board terminal	3V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ204H	Standard PC board terminal	4.5V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A12	Surface-mount terminal	12V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A03	Surface-mount terminal	3V DC	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A03X	Surface-mount terminal	3V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A12Z	Surface-mount terminal	12V DC	Tape and reel packing (Z)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A24X	Surface-mount terminal	24V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ2203	Standard PC board terminal	3V DC	Tube package	2 Coil Latching Type	Sealed Type	150mW			2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)
ARJ20A4HX	Surface-mount terminal	4.5V DC	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	2 Form C	Au plating	High frequency load: Max. 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25), Resistive load: 10mA 10V DC	Between open contacts: Min. 35dB Between contact sets: Min. 30dB	Max. 0.5dB (Not included PC board loss)	Max. 1.25	Min. 10x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min 10⁶ope. High frequency load 1W (5GHz, 50Ω, V.S.W.R. Max. 1.25) 10⁶ope. Resistive load 10mA 10V DC	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －30 to ＋70 ℃ (Allowable temperature is from －30 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			5GHz	50Ω	Max. 1W (1GHz, 50Ω, V.S.W.R. Max. 1.25)

Resources

Filter by:

Showing 1 to 10 of 19 results

Results19

What's New

Stay up to date

View All

May 14, 2022

NEW RE (ARE1_C90) Series High Frequency Signal Relays

Relays & Contactors