RN Series Relay

The Panasonic RN Series High Frequency Signal Relays offer a Single Pole Double Throw (1FormC) contact arrangement with 50 Ohm Impedance matching options which can switch up to 8GHz transmission signal and 150 Watt carrying power (at 2 GHz with heat sink). The Panasonic RN Series High Frequency Relay is available as a surface mount device and has dimensions that are (14.6 x 9.6 x 10.0) mm. This series is also available with a single-side stable type or with a 2-coil latching operation.

To achieve excellent high frequency characteristics, Panasonic RN Series High Frequency Relays have a unique contact-point structure that is different from that of general-purpose signal relays. The contact point of Panasonic high frequency relays is surrounded by a metal shield plate that is connected to multiple earth terminals which would be connected to ground on the PC Board. The contact points are designed as a double-break. When the contact point is OFF, the contact spring will touch with the shield plate. The adoption of this complicated structure is what ensures excellent electrical isolation.

Microwave devices are essential components for switching high frequency signals in measuring instruments, mobile phone base stations, and radios. In measurement equipment such as oscilloscopes and spectrum analyzers, these relays can control high frequency signals for transmitting and receiving circuits as well as fulfill the long life requirements of these devices. For mobile base stations, high frequency relays can be used to switch in a redundant circuit for the tower mounted amplifier in case a power loss occurs. In wireless LAN applications, relays can be used to switch the transmitting and receiving signal of a ZigBee module or other transceiver device.

Features and Benefits

Excellent High Frequency Characteristics (50Ω, up to 8 GHz)
Compact Size: 9.6 (W) x 14.6 (L) x 10 (H) mm
2 GHz, 150 W Carrying Power Possible

Applications

Measuring Equipment
Base Stations Market
High Frequency AMP Switching In Wireless Devices

RN Series Relay

Part number list

Results 27

Models table for series RN Series Relay
Part No.	Coil Voltage	Contact Arrangement	Protective Construction	Terminal Type	Rated operating power	Pick-Up Voltage	Drop-Out Voltage	Figure of Output	Contact Material	Impedance	Contact Rating	Isolation	Insertion (Without D.U.T Board's Loss)	V.S.W.R	Expected Life: Mechanical	Expected Life: Electrical	Breakdown Voltage (Contact-Contact) (Initial)	Breakdown Voltage (Initial) : Between Contact And Coil	Ambient Temperature	Operating Function	Set Voltage	Reset Voltage	Packing Quantity	Contact Carrying Power
ARN10A12X	12V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	320mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Single Side Stable Type			Tape and reel packing (X)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN10A4HZ	4.5V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	320mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Single Side Stable Type			Tape and reel packing (Z)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A12	12V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Carton	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A12X	12V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Tape and reel packing (X)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A24Z	24V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Tape and reel packing (Z)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A24X	24V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Tape and reel packing (X)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A24	24V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Carton	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A4HZ	4.5V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Tape and reel packing (Z)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN30A24	24V DC	1 Form C (Reversed contact type)	Flux-resistant type	Surface-mount terminal	320mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Single Side Stable Type			Carton	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN30A24X	24V DC	1 Form C (Reversed contact type)	Flux-resistant type	Surface-mount terminal	320mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Single Side Stable Type			Tape and reel packing (X)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)

Models table for series RN Series Relay
Part No.	Coil Voltage	Contact Arrangement	Protective Construction	Terminal Type	Rated operating power	Pick-Up Voltage	Drop-Out Voltage	Figure of Output	Contact Material	Impedance	Contact Rating	Isolation	Insertion (Without D.U.T Board's Loss)	V.S.W.R	Expected Life: Mechanical	Expected Life: Electrical	Breakdown Voltage (Contact-Contact) (Initial)	Breakdown Voltage (Initial) : Between Contact And Coil	Ambient Temperature	Operating Function	Set Voltage	Reset Voltage	Packing Quantity	Contact Carrying Power
ARN10A12X	12V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	320mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Single Side Stable Type			Tape and reel packing (X)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN10A4HZ	4.5V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	320mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Single Side Stable Type			Tape and reel packing (Z)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A12	12V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Carton	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A12X	12V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Tape and reel packing (X)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A24Z	24V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Tape and reel packing (Z)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A24X	24V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Tape and reel packing (X)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A24	24V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Carton	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN12A4HZ	4.5V DC	1 Form C (Standard contact type)	Flux-resistant type	Surface-mount terminal	400mW			8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	2 Coil Latching Type	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Tape and reel packing (Z)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN30A24	24V DC	1 Form C (Reversed contact type)	Flux-resistant type	Surface-mount terminal	320mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Single Side Stable Type			Carton	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)
ARN30A24X	24V DC	1 Form C (Reversed contact type)	Flux-resistant type	Surface-mount terminal	320mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	8GHz	Au plating	50Ω	80W (2GHz, 50Ω, V.S.W.R. Max. 1.15)	Min. 60dB (to 1GHz) Min. 55dB (1 to 2GHz) Min. 45dB (2 to 3GHz) Min. 30dB (3 to 6GHz)	Max. 0.1dB (to 1GHz) Max. 0.12dB (1 to 2GHz) Max. 45dB (2 to 3GHz) Max. 30dB (3 to 6GHz)	Max. 1.1 (to 1GHz) Max. 1.15 (1 to 2GHz) Max. 1.2 (2 to 3GHz) Max. 1.3 (3 to 6GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Min. 10⁶ope. 10mA 10V DC [Resistive load, Switching frequency at 20 times/min] Min. 10⁶ope. 1W (2GHz, 50Ω, V.S.W.R. Max. 1.15) [High frequency load, Switching frequency at 20 times/min] Min. 10³ope. 80W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) [High frequency load, Switching frequency ON: OFF = 5 s: 5 s]	500 V rms for 1 min (detection current: 10 mA)	500 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋85 ℃ (Allowable temperature is from －40 to ＋60 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Single Side Stable Type			Tape and reel packing (X)	Max. 150W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 with heat sink) Max. 100W (at 20℃, 2GHz, 50Ω, V.S.W.R. Max. 1.15 without heat sink)

Resources

Filter by:

Showing 1 to 10 of 18 results

Results18

What's New

Stay up to date

View All

May 14, 2022

NEW RE (ARE1_C90) Series High Frequency Signal Relays

Relays & Contactors

RN Series Relay

RN Series Relay

Part number list

Resources

New LD-P Series General Power Relays

Stay up to date

NEW RE (ARE1_C90) Series High Frequency Signal Relays