RS Series Relays

Panasonic RS Series Relays are High Frequency Signal Relays with a Single Pole Double Throw (1 Form C) contact arrangement with both 50 and 75 Ohm Impedance matching options which can switch up to 3GHz transmission signal and 10 Watt carrying power.

RS Series Relays are available in both Through-Hole and Surface Mount terminal options and have dimensions that are 14.0 x 8.6 x 7.2 mm.

RS Series Relays are also available with a single-side stable type as well as both 1-coil and 2-coil latching operation types.

In order to achieve excellent high frequency characteristics, Panasonic High Frequency Relays have a unique contact-point structure that is different from that of General Purpose Signal Relays. The contact point of Panasonic High Frequency Relays is surrounded by a metal shield plate that is connected to multiple earth terminals which would be connected to ground on the PC Board. The contact points are designed as a double-break. When the contact point is OFF, the contact spring will touch with the shield plate. The adoption of this complicated structure is what ensures excellent electrical isolation.

Microwave devices are essential components for switching high frequency signals in measuring instruments, mobile phone base stations, and radios. In measurement equipment such as oscilloscopes and spectrum analyzers, these Relays are able to control high frequency signals for transmitting and receiving circuits as well as fulfill the long life requirements of these devices.

For mobile base stations, High Frequency Relays can be used to switch in a redundant circuit for the tower mounted amplifier in case a power loss occurs. In wireless LAN applications, Relays can be used to switch the transmitting and receiving signal of a ZigBee module or other transceiver device.

RS Series Relays

Part number list

Results 430

Models table for series RS Series Relays
Part No.	Terminal Type	Coil Voltage	Contact Arrangement	Impedance	Packing Quantity	Operating Function	Protective Construction	Rated operating power	Pick-Up Voltage	Drop-Out Voltage	Figure of Output	Contact Material	Contact Rating	Isolation	Insertion (Without D.U.T Board's Loss)	V.S.W.R	Expected Life: Mechanical	Expected Life: Electrical	Breakdown Voltage (Contact-Contact) (Initial)	Breakdown Voltage (Initial) : Between Contact And Coil	Ambient Temperature	Set Voltage	Reset Voltage	Contact Carrying Power
ARS1003	Standard PC board terminal	3V DC	1 Form C	75Ω	Carton	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 60dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.1dB (to 900MHz), Max. 0.3dB (to 3GHz)	Max. 1.15 (to 900MHz), Max. 1.4 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS1009	Standard PC board terminal	9V DC	1 Form C	75Ω	Carton	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 60dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.1dB (to 900MHz), Max. 0.3dB (to 3GHz)	Max. 1.15 (to 900MHz), Max. 1.4 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS1012	Standard PC board terminal	12V DC	1 Form C	75Ω	Carton	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 60dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.1dB (to 900MHz), Max. 0.3dB (to 3GHz)	Max. 1.15 (to 900MHz), Max. 1.4 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS1024	Standard PC board terminal	24V DC	1 Form C	75Ω	Carton	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 60dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.1dB (to 900MHz), Max. 0.3dB (to 3GHz)	Max. 1.15 (to 900MHz), Max. 1.4 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS10A03	Surface-mount terminal E layout	3V DC	1 Form C	75Ω	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS10A03Z	Surface-mount terminal E layout	3V DC	1 Form C	75Ω	Tape and reel packing (Z)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS10A09X	Surface-mount terminal E layout	9V DC	1 Form C	75Ω	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS10A09Z	Surface-mount terminal E layout	9V DC	1 Form C	75Ω	Tape and reel packing (Z)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS12A4HZ	Surface-mount terminal E layout	4.5V DC	1 Form C	75Ω	Tape and reel packing (Z)	2 Coil Latching Type	Sealed Type	400mW			3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS12A4HX	Surface-mount terminal E layout	4.5V DC	1 Form C	75Ω	Tape and reel packing (X)	2 Coil Latching Type	Sealed Type	400mW			3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)

Models table for series RS Series Relays
Part No.	Terminal Type	Coil Voltage	Contact Arrangement	Impedance	Packing Quantity	Operating Function	Protective Construction	Rated operating power	Pick-Up Voltage	Drop-Out Voltage	Figure of Output	Contact Material	Contact Rating	Isolation	Insertion (Without D.U.T Board's Loss)	V.S.W.R	Expected Life: Mechanical	Expected Life: Electrical	Breakdown Voltage (Contact-Contact) (Initial)	Breakdown Voltage (Initial) : Between Contact And Coil	Ambient Temperature	Set Voltage	Reset Voltage	Contact Carrying Power
ARS1003	Standard PC board terminal	3V DC	1 Form C	75Ω	Carton	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 60dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.1dB (to 900MHz), Max. 0.3dB (to 3GHz)	Max. 1.15 (to 900MHz), Max. 1.4 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS1009	Standard PC board terminal	9V DC	1 Form C	75Ω	Carton	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 60dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.1dB (to 900MHz), Max. 0.3dB (to 3GHz)	Max. 1.15 (to 900MHz), Max. 1.4 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS1012	Standard PC board terminal	12V DC	1 Form C	75Ω	Carton	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 60dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.1dB (to 900MHz), Max. 0.3dB (to 3GHz)	Max. 1.15 (to 900MHz), Max. 1.4 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS1024	Standard PC board terminal	24V DC	1 Form C	75Ω	Carton	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 60dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.1dB (to 900MHz), Max. 0.3dB (to 3GHz)	Max. 1.15 (to 900MHz), Max. 1.4 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS10A03	Surface-mount terminal E layout	3V DC	1 Form C	75Ω	Tube package	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS10A03Z	Surface-mount terminal E layout	3V DC	1 Form C	75Ω	Tape and reel packing (Z)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS10A09X	Surface-mount terminal E layout	9V DC	1 Form C	75Ω	Tape and reel packing (X)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS10A09Z	Surface-mount terminal E layout	9V DC	1 Form C	75Ω	Tape and reel packing (Z)	Single Side Stable Type	Sealed Type	200mW	Max. 75 % V of rated coil voltage (Initial)	Min. 10 % V of rated coil voltage (Initial)	3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 5x10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)			Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS12A4HZ	Surface-mount terminal E layout	4.5V DC	1 Form C	75Ω	Tape and reel packing (Z)	2 Coil Latching Type	Sealed Type	400mW			3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)
ARS12A4HX	Surface-mount terminal E layout	4.5V DC	1 Form C	75Ω	Tape and reel packing (X)	2 Coil Latching Type	Sealed Type	400mW			3GHz	Au plating	1W (3GHz, 75Ω, V.S.W.R. Max. 1.4), 10mA 24V DC (resistive load)	Min. 55dB (to 900MHz), Min. 30dB (to 3GHz)	Max. 0.2dB (to 900MHz), Max. 0.5dB (to 3GHz)	Max. 1.2 (to 900MHz), Max. 1.5 (to 3GHz)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Conditions: Switching frequency at 20 times/min Resistive load Min. 300×10³ope. 10mA 24V DC High frequency load 1W (3GHz, 75Ω, V.S.W.R. Max.1.4)	500 V rms for 1 min (detection current: 10 mA)	1,000 V rms for 1 min (detection current: 10 mA)	Ambient temperature: －40 to ＋70 ℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition) Humidity: 5 to 85% RH (Avoid icing and condensation)	Max. 75 % V of rated coil voltage (Initial)	Max. 75 % V of rated coil voltage (Initial)	Max. 10W (3GHz, 75Ω, V.S.W.R. Max. 1.4)

Resources

Filter by:

Showing 1 to 10 of 19 results

Results19

What's New

Stay up to date

View All

Jul 11, 2019

NEW RE (ARE1_C90) Series High Frequency Signal Relays

Relays & Contactors