Part Number List

Results 3
Models table for series ON / OFF Input Sensor Controller NPS
Part No.DatasheetConnectable sensorsSupply voltagePower consumptionPower supply for sensor : VoltagePower supply for sensor : CurrentOutputOutput : Output operationResponse timeIndicators : PowerIndicators : OutputEnvironmental resistance : Ambient temperatureEnvironmental resistance : Ambient humidityEnvironmental resistance : Voltage withstandabilityEnvironmental resistance : Insulation resistanceEnvironmental resistance : Vibration resistanceEnvironmental resistance : Shock resistanceMaterialConnecting methodNet weightAccessoryExternal synchronization functionIndicators : Sensor signal inputIndicators : External synchronization inputTimer function
Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output
100 to 240 V AC±10%
6 VA or less
12 V DC ± 10 % (incorporated with short-circuit protection)
120 mA max.
Relay contact 1c x2
・Switching capacity : 250 V 3 A AC (resistive load)
・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour)
・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)
Switchable normal operation or inverse operation
10 ms approx.
Red LED (lights up when the power is ON)
Red LED (lights up when the output is ON)
Note : In NPS-C7W, two output indicators, Sensor 1 output indicator and Sensor 2 output indicator, have been incorporated.
-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between the power and the output terminals
10 MΩ, or more, with 500 V DC megger between the power and the output terminals
10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each
Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)
Terminal block
Net weight: 160 g approx.
Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc.
Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output
100 to 240 V AC±10%
6 VA or less
12 V DC ± 10 % (incorporated with short-circuit protection)
150 mA max.
Relay contact 1c
・Switching capacity : 250 V 3 A AC (resistive load)
・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour)
・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)

NPN open-collector transistor
・Maximum sink current : 100 mA or less
・Applied voltage : 30 V DC or less(between output and 0 V)
・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Switchable normal operation or inverse operation
Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less
Red LED (lights up when the power is ON)
Red LED (lights up when the output is ON)
-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between the power and the output terminals
10 MΩ, or more, with 500 V DC megger between the power and the output terminals
10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each
Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)
Terminal block
Net weight: 160 g approx.
Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc.
Gate trigger
Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output
100 to 240 V AC±10%
6 VA or less
12 V DC ± 10 % (incorporated with short-circuit protection)
130 mA max.
Relay contact 1c
・Switching capacity : 250 V 3 A AC (resistive load)
・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour)
・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)

NPN open-collector transistor
・Maximum sink current : 100 mA or less
・Applied voltage : 30 V DC or less(between output and 0 V)
・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Switchable normal operation or inverse operation
Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less
Red LED (lights up when the power is ON)
Red LED (lights up when the output is ON)
-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between the power and the output terminals
10 MΩ, or more, with 500 V DC megger between the power and the output terminals
10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each
Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)
Terminal block
Net weight: 160 g approx.
Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc., Adjusting screwdriver: 1 pc.
Gate trigger and edge trigger
Red LED
(lights up when the sensor signal input is effective)
Red LED
(lights up when the external synchronization input is effective)
Three function selectable timer
(Timer period: switchable either 40 ms to 1 sec. or 0.4 sec. to 10 sec.)