Photoelectric Sensors / Laser Sensors: Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH

Model List

Found 17 matches. Display 1 - 15 matches.
Part No.sort descendingData SheetApplicable amplifiersSensing rangeSensing objectHysteresisRepeatability(perpendicular to sensing axis)Operation indicatorProtectionAmbient temperatureAmbient humidityAmbient illuminanceParts Inventory
   Column active Filter
Close

Filter by Applicable amplifiers

Column active Filter
Close

Filter by Sensing range

Column active Filter
Close

Filter by Sensing object

Column active Filter
Close

Filter by Hysteresis

Column active Filter
Close

Filter by Repeatability(perpendicular to sensing axis)

Column active Filter
Close

Filter by Operation indicator

Column active Filter
Close

Filter by Protection

Column active Filter
Close

Filter by Ambient temperature

Column active Filter
Close

Filter by Ambient humidity

Column active Filter
Close

Filter by Ambient illuminance

 
design engineersPanasonicSH-21
SU-7 series300 mm 11.811 inMin. ø0.3 mm ø0.012 in opaque object (under the optimum condition)
Note : The optimum condition is the condition when the sensitivity is adjusted so that the operation indicator just lights up at the given distance in the light received condition.
n/a0.03 mm 0.001 in or lessn/aIP62 (IEC)-10 to +60 ℃ +14 to 140 ℉ (No dew condensation or icing allowed)
Storage : -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSH-21E
SU-7 series300 mm 11.811 inMin. ø0.3 mm ø0.012 in opaque object (under the optimum condition)
Note : The optimum condition is the condition when the sensitivity is adjusted so that the operation indicator just lights up at the given distance in the light received condition.
n/a0.03 mm 0.001 in or lessn/aIP62 (IEC)-10 to +60 ℃ +14 to 140 ℉ (No dew condensation or icing allowed)
Storage : -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSH-22
SU-7 series50 mm 1.969 in(Note)
Note 2 : The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.
Min. ø0.3 mm ø0.012 in copper wire (with 3 mm 0.118 in setting distance and at the max sensitivity)15 % or less of operation distance
Note : The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.
0.15 mm 0.006 in or lessn/aIP62 (IEC)-10 to +60 ℃ +14 to 140 ℉ (No dew condensation or icing allowed)
Storage : -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSH-31G
SU-7 series100 mm 3.937 inMin. ø1 mm ø0.039 in opaque object (with 100 mm 3.937 in setting distance and at the optimum sensitivity)
Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.
n/a0.1 mm 0.004 in or lessRed LED(lights up when the sensing output of the amplifier is ON, incorporated on the emitter of the thru-beam type sensor head)IP66 (IEC)-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSH-31R
n/an/an/an/an/an/an/an/an/an/a
design engineersPanasonicSH-32R
SU-7 series100 mm 3.937 in
Note : The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.
Opaque, translucent or transparent object
Note : Make sure to confirm detection with an actual sensor before use.
15 % or less of operation distance
Note : The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.
0.5 mm 0.020 in or lessRed LED(lights up when the sensing output of the amplifier is ON)IP66 (IEC)-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSH-33R
SU-7 series2 m 6.562 ftMin. ø1 mm ø0.039 in opaque object (with 2 m 6.562 ft setting distance and at the optimum sensitivity)
Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.
n/a0.1 mm 0.004 in or lessRed LED(lights up when the sensing output of the amplifier is ON, incorporated on the emitter of the thru-beam type sensor head)IP66 (IEC)-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSH-61R
SU-7 series2.5 m 8.202 ft [5 to 80 mm 0.197 to 3.150 in when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (Conv. point: 25 mm 0.984 in) (Note)]
Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object.
Min. ø5 mm ø0.197 in opaque object
[Min. ø1 mm ø0.039 in steel wire when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (with 25 mm 0.984 in setting distance and at the max. sensitivity)]
-
[15 % or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type.(Note)]
Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object.
0.1 mm 0.004 in or less
[0.1 mm 0.004 in or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type. (with 25 mm 0.984 in setting distance and at the optimum sensitivity(Note))]
Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.
Orange LED [lights up when the sensing output of the amplifier is ON, incorporated on the emitter]IP67 (IEC)-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 2,000 lx or less at the light-receiving face
design engineersPanasonicSH-72
SU-7 series0.5 to 7.5 mm 0.020 to 0.295 in (with transparent glass plate)□24 mm □0.945 in or more transparent glass, aluminum-evaporated mirror, etc.
Note : Make sure to confirm detection with an actual sensor before use.
5 % or less of operation distance0.03 mm 0.001 in or less (along sensing axis)n/an/a-10 to +60 ℃ +14 to +140 ℉(No dew condensation or icing allowed)
Storage: -10 to +60 ℃ +14 to +140 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSH-82G
SU-7 series10 to 14 mm 0.394 to 0.551 in (Convergent point: 12 mm 0.472 in) (Spot diameter: ø1 mm ø0.039 in)
Note : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.
Min. 0.2 mm 0.008 in width black line on white paper (with 12 mm 0.472 in setting distance and at the optimum sensitivity)
Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.
10 % or less of operation distance
Note 2 : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.
0.03 mm 0.001 in or lessRed LED (lights up when the sensing output of the amplifier is ON)n/a-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSH-82R
SU-7 series10 to 14 mm 0.394 to 0.551 in (Convergent point: 12 mm 0.472 in) (Spot diameter: ø0.7 mm ø0.028 in)
Note : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.
Min. 0.07 mm 0.003 in width black line on white paper (with 12 mm 0.472 in setting distance and at the optimum sensitivity)
Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.
10 % or less of operation distance
Note 2 : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.
0.02 mm 0.0008 in or lessRed LED (lights up when the sensing output of the amplifier is ON)n/a-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSH-84R
SU-7 series17 to 23 mm 0.669 to 0.906 in (Convergent point: 20 mm 0.787 in) (Spot size: 1 x 4 mm 0.039 x 0.157 in)
Note : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.
Min. 0.07 mm 0.003 in width black line on white paper (Note 1)
(with 20 mm 0.787 in setting distance and at the optimum sensitivity)(Note 2)
Note 1 : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.

Note 2 : The minimum sensing object for SH-84R is specified for the case when the sensor detects a black line with respect to the spot as shown below.
10 % or less of operation distance
Note 2 : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.
0.03 mm 0.001 in or less
Note : The repeatability for SH-84R is specified for the case when the sensing object approaches the spot sideways as shown below (0.12 mm 0.005 in if it approaches from above or below).
Red LED (lights up when the sensing output of the amplifier is ON)n/a-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHIncandescent light: 3,500 lx or less at the light-receiving face
design engineersPanasonicSU-7
n/an/an/an/an/aRed LED (lights up when the sensing output is ON)n/a-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHn/a
design engineersPanasonicSU-75
n/an/an/an/an/aRed LED (lights up when the sensing output is ON)n/a-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHn/a
design engineersPanasonicSU-77
n/an/an/an/an/aRed LED (lights up when the sensing output is ON)n/a-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHn/a

Pages