| | EMC Directive, RoHS Directive | Liquid (Note):Unclear or highly viscous liquid may not be detected stably. | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note:Do not use the sensor with pipes other than the above specified.) | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | 30 mA or less (Note:Unclear or highly viscous liquid may not be detected stably.) | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) | Incorporated | 2 ms or less | Red LED (lights up when the output is ON) | 35 to 85 % RH, Storage: 35 to 85 % RH | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ (Note:Liquid being detected should also be kept within the rated ambient temperature range.) | lncandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each | Infrared LED (modulated) | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone | | | | Tying band: 2 pcs., Anti-slip tube: 2 pcs. |
| | EMC Directive, RoHS Directive | Liquid (Note):Unclear or highly viscous liquid may not be detected stably. | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note:Do not use the sensor with pipes other than the above specified.) | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | 30 mA or less (Note:Unclear or highly viscous liquid may not be detected stably.) | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) | Incorporated | 2 ms or less | Red LED (lights up when the output is ON) | 35 to 85 % RH, Storage: 35 to 85 % RH | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ (Note:Liquid being detected should also be kept within the rated ambient temperature range.) | lncandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each | Infrared LED (modulated) | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone | 0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. | Net weight: 15 g approx., Gross weight: 60 g approx. | Tying band: 2 pcs., Anti-slip tube: 2 pcs. |