Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
Enclosure: Polycarbonate
Terminal block connection
Net weight: 55 g approx.
Models table for series Ultra-compact Digital Panel Controller CA2
Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Negative logic, Input time duration 10 ms or more Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
NPN open-collector transistor ・ Maximum sink current: 100 mA ・ Applied voltage: 35 V DC or less (between comparative output and GND) ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
5 ms or less (when start / hold input is used at a sampling rate of 200 times/sec.)
Variable from 1 to 3,999 digits
4 digit 7-segment red LED display (letter height: 8 mm 0.315 in)
Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
-9999 to +9999
1 digit
Red LED (lights up when the displayed value or the threshold value is negative)
Orange LED (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display. Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Green LED (lights up when auto-reference function is used)
Orange LED (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display. Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between all supply terminals connected together and enclosure
100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less