| | EMC Directive, RoHS Directive | 0.2 to 2 m 0.656 to 6.562 ft (Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away. | 0.1 to 2 m 0.328 to 6.562 ft | 10 % or less of operation distance (With white non-glossy paper) | Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper) | 10 to 30 V DC Ripple P-P 10 % or less | 55 mA or less | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and + V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) | DC-12 or DC-13 | Switchable either Detection-ON or Detection-OFF | Incorporated | 2 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | 2-turn mechanical adjuster with pointer | Incorporated (Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects. | 3 (Industrial environment) | IP67 (IEC) | -20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 ℓx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Enclosure: Polyalylate and Polyethylene terephthalate Lens: Polyalylate | 0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 150 g approx Gross weight: 200 g approx | Adjusting screwdriver: 1 pc. |
| | EMC Directive, RoHS Directive | 0.2 to 2 m 0.656 to 6.562 ft (Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away. | 0.1 to 2 m 0.328 to 6.562 ft | 10 % or less of operation distance (With white non-glossy paper) | Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper) | 10 to 30 V DC Ripple P-P 10 % or less | 50 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Switchable either Detection-ON or Detection-OFF | Incorporated | 2 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | 2-turn mechanical adjuster with pointer | Incorporated (Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects. | 3 (Industrial environment) | IP67 (IEC) | -20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 ℓx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Enclosure: Polyalylate and Polyethylene terephthalate Lens: Polyalylate | 0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 150 g approx Gross weight: 200 g approx | Adjusting screwdriver: 1 pc. |
| | EMC Directive, RoHS Directive | 0.2 to 2 m 0.656 to 6.562 ft (Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away. | 0.1 to 2 m 0.328 to 6.562 ft | 10 % or less of operation distance (With white non-glossy paper) | Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper) | 10 to 30 V DC Ripple P-P 10 % or less | 50 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Switchable either Detection-ON or Detection-OFF | Incorporated | 2 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | 2-turn mechanical adjuster with pointer | Incorporated (Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects. | 3 (Industrial environment) | IP67 (IEC) | -20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 ℓx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Enclosure: Polyalylate and Polyethylene terephthalate Lens: Polyalylate | 0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 150 g approx Gross weight: 200 g approx | Adjusting screwdriver: 1 pc. |
| | EMC Directive, RoHS Directive | 0.2 to 2 m 0.656 to 6.562 ft (Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away. | 0.1 to 2 m 0.328 to 6.562 ft | 10 % or less of operation distance (With white non-glossy paper) | Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper) | 10 to 30 V DC Ripple P-P 10 % or less | 55 mA or less | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and + V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) | DC-12 or DC-13 | Switchable either Detection-ON or Detection-OFF | Incorporated | 2 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | 2-turn mechanical adjuster with pointer | Incorporated (Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects. | 3 (Industrial environment) | IP67 (IEC) | -20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 ℓx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Enclosure: Polyalylate and Polyethylene terephthalate Lens: Polyalylate | 0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 150 g approx Gross weight: 200 g approx | Adjusting screwdriver: 1 pc. |
| | EMC Directive, RoHS Directive | 0.2 to 2 m 0.656 to 6.562 ft (Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away. | 0.1 to 2 m 0.328 to 6.562 ft | 10 % or less of operation distance (With white non-glossy paper) | Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper) | 10 to 30 V DC Ripple P-P 10 % or less | 50 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Switchable either Detection-ON or Detection-OFF | Incorporated | 2 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | 2-turn mechanical adjuster with pointer | Incorporated (Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects. | 3 (Industrial environment) | IP67 (IEC) | -20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 ℓx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Enclosure: Polyalylate and Polyethylene terephthalate Lens: Polyalylate | 0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | | Adjusting screwdriver: 1 pc. |