ON / OFF Input Sensor Controller NPS

The ON / OFF Input Sensor Controller NPS is a multi-functional slim Sensor Controller. Two Sensors can be connected and two independent outputs are generated. Two outputs: contact and non-contact.

Models table for series ON / OFF Input Sensor Controller NPS
Part No.	Datasheet	Connectable sensors	Supply Voltage	Power Consumption	Power Supply for Sensor: Voltage	Power Supply for Sensor: Current	Output	Output: Output Operation	Response Time	Indicators: Power	Indicators: Output	Indicators: Sensor Signal Input	Indicators: External Synchronization Input	External Synchronization Function	Timer Function	Environmental Resistance: Ambient Temperature	Environmental Resistance: Ambient Humidity	Environmental Resistance: Voltage Withstandability	Environmental Resistance: Insulation Resistance	Environmental Resistance: Vibration Resistance	Environmental Resistance: Shock Resistance	Material	Net Weight	Connecting Method	Accessory
NPS-CV
NPS-C7W		Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output	100 to 240 V AC±10%	6 VA or less	12 V DC ± 10 % (incorporated with short-circuit protection)	120 mA max.	Relay contact 1c x2 ・Switching capacity : 250 V 3 A AC (resistive load) ・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour) ・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)	Switchable normal operation or inverse operation	10 ms approx.	Red LED (lights up when the power is ON)	Red LED (lights up when the output is ON) Note : In NPS-C7W, two output indicators, Sensor 1 output indicator and Sensor 2 output indicator, have been incorporated.					-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	1,500 V AC for one min. between the power and the output terminals	10 MΩ, or more, with 500 V DC megger between the power and the output terminals	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions two times each	Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)	Net weight: 160 g approx.	Terminal block	Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc.
NPS-CT7		Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output	100 to 240 V AC±10%	6 VA or less	12 V DC ± 10 % (incorporated with short-circuit protection)	130 mA max.	Relay contact 1c ・Switching capacity : 250 V 3 A AC (resistive load) ・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour) ・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour) NPN open-collector transistor ・Maximum sink current : 100 mA or less ・Applied voltage : 30 V DC or less(between output and 0 V) ・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Switchable normal operation or inverse operation	Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less	Red LED (lights up when the power is ON)	Red LED (lights up when the output is ON)	Red LED (lights up when the sensor signal input is effective)	Red LED (lights up when the external synchronization input is effective)	Gate trigger and edge trigger	Three function selectable timer (Timer period: switchable either 40 ms to 1 sec. or 0.4 sec. to 10 sec.)	-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	1,500 V AC for one min. between the power and the output terminals	10 MΩ, or more, with 500 V DC megger between the power and the output terminals	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions two times each	Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)	Net weight: 160 g approx.	Terminal block	Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc., Adjusting screwdriver: 1 pc.
NPS-C7		Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output	100 to 240 V AC±10%	6 VA or less	12 V DC ± 10 % (incorporated with short-circuit protection)	150 mA max.	Relay contact 1c ・Switching capacity : 250 V 3 A AC (resistive load) ・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour) ・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour) NPN open-collector transistor ・Maximum sink current : 100 mA or less ・Applied voltage : 30 V DC or less(between output and 0 V) ・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Switchable normal operation or inverse operation	Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less	Red LED (lights up when the power is ON)	Red LED (lights up when the output is ON)			Gate trigger		-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	1,500 V AC for one min. between the power and the output terminals	10 MΩ, or more, with 500 V DC megger between the power and the output terminals	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions two times each	Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)	Net weight: 160 g approx.	Terminal block	Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc.

Models table for series ON / OFF Input Sensor Controller NPS
Part No.	Datasheet	Connectable sensors	Supply Voltage	Power Consumption	Power Supply for Sensor: Voltage	Power Supply for Sensor: Current	Output	Output: Output Operation	Response Time	Indicators: Power	Indicators: Output	Indicators: Sensor Signal Input	Indicators: External Synchronization Input	External Synchronization Function	Timer Function	Environmental Resistance: Ambient Temperature	Environmental Resistance: Ambient Humidity	Environmental Resistance: Voltage Withstandability	Environmental Resistance: Insulation Resistance	Environmental Resistance: Vibration Resistance	Environmental Resistance: Shock Resistance	Material	Net Weight	Connecting Method	Accessory
NPS-CV
NPS-C7W		Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output	100 to 240 V AC±10%	6 VA or less	12 V DC ± 10 % (incorporated with short-circuit protection)	120 mA max.	Relay contact 1c x2 ・Switching capacity : 250 V 3 A AC (resistive load) ・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour) ・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)	Switchable normal operation or inverse operation	10 ms approx.	Red LED (lights up when the power is ON)	Red LED (lights up when the output is ON) Note : In NPS-C7W, two output indicators, Sensor 1 output indicator and Sensor 2 output indicator, have been incorporated.					-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	1,500 V AC for one min. between the power and the output terminals	10 MΩ, or more, with 500 V DC megger between the power and the output terminals	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions two times each	Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)	Net weight: 160 g approx.	Terminal block	Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc.
NPS-CT7		Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output	100 to 240 V AC±10%	6 VA or less	12 V DC ± 10 % (incorporated with short-circuit protection)	130 mA max.	Relay contact 1c ・Switching capacity : 250 V 3 A AC (resistive load) ・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour) ・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour) NPN open-collector transistor ・Maximum sink current : 100 mA or less ・Applied voltage : 30 V DC or less(between output and 0 V) ・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Switchable normal operation or inverse operation	Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less	Red LED (lights up when the power is ON)	Red LED (lights up when the output is ON)	Red LED (lights up when the sensor signal input is effective)	Red LED (lights up when the external synchronization input is effective)	Gate trigger and edge trigger	Three function selectable timer (Timer period: switchable either 40 ms to 1 sec. or 0.4 sec. to 10 sec.)	-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	1,500 V AC for one min. between the power and the output terminals	10 MΩ, or more, with 500 V DC megger between the power and the output terminals	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions two times each	Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)	Net weight: 160 g approx.	Terminal block	Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc., Adjusting screwdriver: 1 pc.
NPS-C7		Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output	100 to 240 V AC±10%	6 VA or less	12 V DC ± 10 % (incorporated with short-circuit protection)	150 mA max.	Relay contact 1c ・Switching capacity : 250 V 3 A AC (resistive load) ・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour) ・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour) NPN open-collector transistor ・Maximum sink current : 100 mA or less ・Applied voltage : 30 V DC or less(between output and 0 V) ・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Switchable normal operation or inverse operation	Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less	Red LED (lights up when the power is ON)	Red LED (lights up when the output is ON)			Gate trigger		-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	1,500 V AC for one min. between the power and the output terminals	10 MΩ, or more, with 500 V DC megger between the power and the output terminals	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions two times each	Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)	Net weight: 160 g approx.	Terminal block	Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc.