Specifications
Item | Performance characteristics |
---|---|
CE Marking Directive Compliance | EMC Directive, RoHS Directive |
Type of Pressure | Gauge pressure |
Rated Pressure Range | 0 to +1.000 MPa |
Pressure Withstandability | 1.5 MPa |
Applicable Fluid | Air, non-corrosive gas |
Supply Voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
Current Consumption | 15 mA or less |
Analog Voltage Output | Output voltage : 1 to 5 V (over rated pressure range) Zero point : within 1 V ± 2.5 % F.S. (vacuum / positive pressure type) within 3 V ± 3 % F.S. (compound pressure type) Span : within 4 V ± 3.5 % F.S. Linearity : within ±0.5 % F.S. Output impedance : 1 kΩ approx. |
Protection | IP40 (IEC) |
Ambient Temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage : -10 to +60 ℃ +14 to +140 ℉ |
Ambient Humidity | 35 to 85 % RH, Storage : 35 to 85 % RH |
Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation Resistance | 50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
Vibration Resistance | 10 to 500 Hz frequency, amplitude 3 mm 0.118 in or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each |
Shock Resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions for three times each |
Temperature Characteristics | Over ambient temperature range 0 to +50 ℃ +32 to +122 ℉ : within ±2 % F.S. of detected pressure at +25 ℃ +77 ℉ |
Pressure Port | R1/8 male thread + M5 female thread. |
Material | Front case : PBT, Rear case : PBT (glass fiber reinforced), Pressure port : Stainless steel (SUS303), O-ring : NBR Pressure element : Silicon diaphragm, PPS |
Connecting Method | Connector |
Cable | 0.2 mm2 4-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable) |
Cable Extension | Extension up to total 10 m 32.808 ft is possible with 0.2 mm2, or more, cable. |
Weight: Net Weight | Head 10 g approx. / Cable 40 g approx. |
Weight: Gross Weight | 80 g approx. |
Accessories | Connector (e-CON) : 1 pc. |
Remark | Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃ +77 ℉. The sensor head can be used independently. |