Specification

Specifications table for model DPH-102-M5-C5
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive
Type of Pressure Gauge pressure
Rated Pressure Range 0 to +1.000 MPa
Pressure Withstandability1.5 MPa
Applicable FluidAir, non-corrosive gas
Supply Voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current Consumption15 mA or less
Analog Voltage OutputOutput voltage : 1 to 5 V (over rated pressure range)
Zero point : within 1 V ± 2.5 % F.S. (vacuum / positive pressure type)
within 3 V ± 3 % F.S. (compound pressure type)
Span : within 4 V ± 3.5 % F.S.
Linearity : within ±0.5 % F.S.
Output impedance : 1 kΩ approx.
ProtectionIP40 (IEC)
Ambient Temperature0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage : -10 to +60 ℃ +14 to +140 ℉
Ambient Humidity35 to 85 % RH, Storage : 35 to 85 % RH
Voltage Withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation Resistance50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance10 to 500 Hz frequency, amplitude 3 mm 0.118 in or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each
Shock Resistance1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions for three times each
Temperature Characteristics Over ambient temperature range 0 to +50 ℃ +32 to +122 ℉ : within ±2 % F.S. of detected pressure at +25 ℃ +77 ℉
Pressure Port M5 male thread (for installing gasket)
MaterialFront case : PBT, Rear case : PBT (glass fiber reinforced), Pressure port : Stainless steel (SUS303), O-ring : NBR
Pressure element : Silicon diaphragm, PPS
Connecting MethodConnector
Cable0.2 mm2 4-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable)
Cable ExtensionExtension up to total 10 m 32.808 ft is possible with 0.2 mm2, or more, cable.
Weight: Net WeightHead 6 g approx. / Cable 40 g approx.
Weight: Gross Weight70 g approx.
AccessoriesConnector (e-CON) : 1 pc.
RemarkWhere measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃ +77 ℉.
The sensor head can be used independently.

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.