EVP-AT Series (3.4mm x 1.7mm, Side Push, Edge Mount)

EVP-AT Series is a Side Push Switch with a high operating life of up to 500,000 cycles. This Side-Operational Switch has a very good click feeling with its short travel as low as 0.08mm. The EVP-AT Series is also IP67 rated (resistant to dust and water).

Features and Benefits of the EVP-AT Series

External dimensions: 3.4 mm x 1.7 mm (excluding the push plate), height 1.65 mm (the height from PCB surface: 1.105 mm)
High operability equipped with an actuator (push plate)
IP67(Sealed Tactile Switch)

EVP-AT Series (3.4mm x 1.7mm, Side Push, Edge Mount)

Part number list

Results 2

Models table for series EVP-AT Series (3.4mm x 1.7mm, Side Push, Edge Mount)
Part No.	Datasheet	External Dimensions (LxWxH) (mm)	Mounting Height (mm) (mm)	Dimensions Excluding Push Plate (mm)	Operating Force (N)	Type	External Dimensions (LxW) (mm)	External Dimensions (H) (mm)	The Length From PCB Edge to Tip of Push Plate (mm)	Operating Direction	Applicable Soldering	Mounting Type	Rating	Contact Resistance (M&Omega: Max.)	Insulation Resistance (MΩ Min. at 100V DC)	Dielectric Withstanding Voltage	Bouncing	Travel Type	Travel (mm)	Operating Life	Protective Construction	Operating Temperature	Storage Temperature	Terminal Type	Push Plate (Actuator)	Ground Terminal	Boss	Packaging	Minimum Quantity/Packing Unit	Quantity/Carton
EVP-AT4L1B000		3.4 x 1.9 x 1.65	1.105	1.73	2.4	Snap action / Push-on type SPST	3.4 x 1.9	1.65	0.585	Side push	Reflow	Edge Mount	10μA 2V DC to 20mA 15V DC (Resistive load)	500	50	250 V AC (for 1minute)	10ms max. (ON, OFF)	Short Push Travel	0.11	500,000 cycles	IP67	-40°C to +85°C	-40°C to +85°C (Bulk) -20°C to +60°C (Taping)	Insert and Flat	With	With	Without	Embossed Taping (Reel Pack)	10,000 pcs.	50,000 pcs.
EVP-AT2L1B000		3.4 x 1.9 x 1.65	1.105	1.73	1.6	Snap action / Push-on type SPST	3.4 x 1.9	1.65	0.560	Side push	Reflow	Edge Mount	10μA 2V DC to 20mA 15V DC (Resistive load)	500	50	250 V AC (for 1minute)	10ms max. (ON, OFF)	Short Push Travel	0.11	500,000 cycles	IP67	-40°C to +85°C	-40°C to +85°C (Bulk) -20°C to +60°C (Taping)	Insert	With	With	Without	Embossed Taping (Reel Pack)	10,000 pcs.	50,000 pcs.

Models table for series EVP-AT Series (3.4mm x 1.7mm, Side Push, Edge Mount)
Part No.	Datasheet	External Dimensions (LxWxH) (mm)	Mounting Height (mm) (mm)	Dimensions Excluding Push Plate (mm)	Operating Force (N)	Type	External Dimensions (LxW) (mm)	External Dimensions (H) (mm)	The Length From PCB Edge to Tip of Push Plate (mm)	Operating Direction	Applicable Soldering	Mounting Type	Rating	Contact Resistance (M&Omega: Max.)	Insulation Resistance (MΩ Min. at 100V DC)	Dielectric Withstanding Voltage	Bouncing	Travel Type	Travel (mm)	Operating Life	Protective Construction	Operating Temperature	Storage Temperature	Terminal Type	Push Plate (Actuator)	Ground Terminal	Boss	Packaging	Minimum Quantity/Packing Unit	Quantity/Carton
EVP-AT4L1B000		3.4 x 1.9 x 1.65	1.105	1.73	2.4	Snap action / Push-on type SPST	3.4 x 1.9	1.65	0.585	Side push	Reflow	Edge Mount	10μA 2V DC to 20mA 15V DC (Resistive load)	500	50	250 V AC (for 1minute)	10ms max. (ON, OFF)	Short Push Travel	0.11	500,000 cycles	IP67	-40°C to +85°C	-40°C to +85°C (Bulk) -20°C to +60°C (Taping)	Insert and Flat	With	With	Without	Embossed Taping (Reel Pack)	10,000 pcs.	50,000 pcs.
EVP-AT2L1B000		3.4 x 1.9 x 1.65	1.105	1.73	1.6	Snap action / Push-on type SPST	3.4 x 1.9	1.65	0.560	Side push	Reflow	Edge Mount	10μA 2V DC to 20mA 15V DC (Resistive load)	500	50	250 V AC (for 1minute)	10ms max. (ON, OFF)	Short Push Travel	0.11	500,000 cycles	IP67	-40°C to +85°C	-40°C to +85°C (Bulk) -20°C to +60°C (Taping)	Insert	With	With	Without	Embossed Taping (Reel Pack)	10,000 pcs.	50,000 pcs.