PAN9520 Series Evaluation Kit

Part Number: ENW49D01AZKF

The PAN9520 Evaluation Kit is an all-inclusive and comprehensive Evaluation Kit available to support rapid prototyping with the PAN9520 Series RF Module.

The PAN9520 Series Evaluation Kit is an Arduino form factor board that has a PAN9520 Series RF Module with 4MB or 1MB of Flash memory, a 40MHz crystal oscillator, and a chip antenna onboard. The PAN9520 Series Evaluation Kit supports the Espressif Integrated Development Framework (ESP-IDF) which can be used to develop software for a wide range of applications. Also, ESP-IDF has numerous software examples which can be used to speed up application development. The PAN9520 Series supports both access and station mode for connection in most Wi-Fi applications. This Evaluation Kit comes with at least 43 programmable GPIOs that can be set for any preferable functionality such as Sensors.

PAN9520 Series Evaluation Kit Features

  • PAN9520 Series Module (4MB Flash / 2MB SRAM Variant)
  • Segger J-Link Onboard Debugger
  • FTDI UART-USB Converter
  • Arduino UNO R3 Header (Master And Slave Mode)
  • 4 User Buttons
  • 3 User LEDs
  • u.FL Connector
  • Native USB Interface
  • Camera Interface
  • Access To All Module GPIOs

PAN9520 Block Diagram

pan9520 block diagram

 

Product image for PAN9520 Series Evaluation Kit

PAN9520 Series Evaluation Kit

More About The PAN9520 Series RF Module

PAN9520_WiFi-Embedded_628x354.png
Embedded Wi-Fi® RF Module Based On Espressif ESP32-S2

The PAN9520 Series RF Module combines a high‑performance CPU, high‑sensitivity wireless radio, baseband (BB) processor, Medium Access Controller (MAC), encryption unit, ROM bootloader, chip-internal SRAM, and module-internal QSPI flash and PSRAM. Features as CCMP, TKIP, WAPI, WEP, BIP, and an AES accelerator enable the usage of secure data connections. 

Parallel support of access point and station mode allows easy setup of simultaneous Wi‑Fi connections from the RF Module to smart devices and home network routers.

With the Espressif Integrated Development Framework (ESP-IDF), software can be developed for a wide range of applications. At the same time, a huge number of software examples can be used as starting point for the development. Besides, Espressif’ s AT software can be used which is available as binary. Moreover, the AT software sources can be cloned and adapted.