Panasonic PAN9420 Series is being discontinued. Last time buy date is effective immediately. Please consult Panasonic PAN1026A, PAN1761, PAN1762, PAN172x, PAN456x & PAN9420 Series Wireless Connectivity Product Discontinuation Notice PDN.PG15.08.20.2021 for details.
Suggested Replacement: PAN9520 Series
PAN9420 Fully Embedded Stand-Alone Wi-Fi Module Specifically Designed For Highly Integrated And Cost-Effective Applications
The PAN9420 Series Includes A Fully Shielded Case, Integrated Crystal Oscillators And A Chip Antenna.
Introducing Panasonic’s Fully Embedded Stand-Alone Wi-FI Module, the PAN9420 Series! The PAN9420 is a 2.4 GHz 802.11 b/g/n Embedded Wi-Fi Module with integrated stack and API that minimizes firmware development and includes a full security suite. The PAN9420 is specifically designed for highly integrated and cost-effective applications. The Module includes a fully shielded case, integrated crystal oscillators and a chip antenna. The PAN9420 Series combines a high-performance CPU, high-sensitivity wireless radio, baseband processor, medium access controller, encryption unit, boot ROM with patching capability, internal SRAM and in-system programmable flash memory. The Modules’ integrated memory is available to the application for storing web content such as HTML pages or image data. Parallel support of access point and infrastructure mode allows easy setup of simultaneous Wi-Fi connections from the PAN9420 to smart devices and home network routers. The pre-programmed Wi-Fi SoC firmware enables client (STA), micro access point (μAP), and Ad-hoc mode (Wi-Fi Direct) applications. With the transparent mode, raw data can be sent from the UART to the air interface to smart devices, web servers or PC applications.
The PAN9420 Evaluation Kit is available with one PAN9420 Mother Board (MB), one PAN9420-ETU daughter board (includes the PAN9420 FCC version module), and one USB-cable packaged in a large case. The PAN9420-ETU daughter board is equipped on the PAN9420-MB, which has two USB to UART converters allowing the hardware access to the two UART module interfaces (command and binary interface). The PAN9420 FCC version module comes pre-loaded with a firmware for IoT applications and a Panasonic Web content example. With a few simple steps the kit is ready to use.
|
|
|
|
|
Block Diagram
To Access Wireless Connectivity Engineering Tools, please click here.
The PAN9420 Evaluation Kit is available with one PAN9420 Mother Board (MB), one PAN9420-ETU daughter board (includes the PAN9420 FCC version module), and one USB-cable packaged in a large case.
The PAN9420-ETU daughter board is equipped on the PAN9420-MB, which has two USB to UART converters allowing the hardware access to the two UART Module interfaces (command and binary interface). The PAN9420 FCC version Module comes pre-loaded with a firmware for IoT applications and a Panasonic Web content example. With a few simple steps the kit is ready to use.
The PAN9420 Evaluation Kit is available from all franchised Panasonic Industrial distributors.
Panasonic’s New 2.4 GHz 802.11 b/g/n PAN9520 Series Embedded Wi-Fi RF Module based on Espressif ESP32-S2 that includes the powerful Xtensa® 32-bit LX7 CPU. Although the new PAN9520 Series is one of the smallest RF Modules on the market, it offers a rich set of peripherals like full-speed USB OTG, SPI, UART, I2C, and much more. The PAN9520 Evaluation Kit is an all-inclusive and comprehensive Evaluation Kit that supports the Espressif Integrated Development Framework (ESP-IDF). It is an Arduino form factor board that has a PAN9520 RF Module with 4MB or 1MB of Flash memory, a 40MHz crystal oscillator and a chip antenna onboard.
New Product Brief: PAN 9520 Series