Sensor-PLC Connection System SC

The SC Sensor - PLC Connection System allows up to 16 I/O devices from any Sensor. Amplifiers from Panasonic's Fiber, Laser and Pressure Sensors can be connected in a side-by-side configuration. In addition, using the Connector input/output extension unit, Photoelectric, Micro Photoelectric, Inductive Proximity and any other types of Sensors or Switches can be connected to an output device with just one touch.

Part Number List

Results 5
Models table for series Sensor-PLC Connection System SC
Part No.DatasheetCE Marking Directive ComplianceApplicable UnitSupply Voltage Supply Current for Units Allowable Passing CurrentSignal Channel No.Max. Distance Between UnitsAmbient TemperatureAmbient HumidityMaterialWeight (Typ.)AccessoryCurrent ConsumptionConnectable DevicePower Indicator Input Indicator
Depends on the supply voltage from SC-MIL
1 A or less (Same as maximum permissible current consumption of all units connected to SC-MIL-S.)
(Note: When either the permissible current amount of power supply unit or the permissible current amount of cable to be connected is less than allowable through current value, adjust the current to the smallest value. .)
Connectable up to 16 channels (The signal from up to 16th point (counting from unit adjacent to SC-MIL) of all units connected to SC-MIL is transferred. However, the signal thereafter is not transferred. Note that SC-MIL-S does not occupy any signal point.)
10 m 32.808 ft or less (the distance between SC-MIL and PLC and that between SC-MIL and SC-MIL-S put together)
–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed),
Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Enclosure: Heat-resistant ABS
Net weight: 20 g approx.
Connector protection seal: 1 pc.
EMC Directive, RoHS Directive
12 to 24 V DC ±10 %
100 mA or less
(Note:Set the maximum current passing through input / output line to 50 mA or less.)
1 input
–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed),
Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Enclosure: Heat-resistant ABS
10 g approx.
SL-CP1 (Snap male connector): 1 pc.
20 mA or less (when all indicators light up)
(Note:The current consumption and input current of the input unit connected are not included.)
NPN open-collector, open-collector, or DC 2-wire output type sensor, or switch etc.
Green LED (Lights up when the power is ON)
Green LED (1 No.) (Lights up when each channel input is ON)
EMC Directive, RoHS Directive
12 to 24 V DC plus or minus 10 % (In combination with SC-TP8J, the unit can be also used with a power supply of 5 to 24 V DC plus or minus 10 %.)
(Note:The plug-in sensor main unit SC-MIL incorporates a cable lead-out connector in addition to the MIL connector, which allows to receive the supply voltage from the separate power supply.)
2 A or less (Same as maximum permissible current consumption of all units connected toSC-MIL-S.)
(Note:When either the permissible current amount of power supply unit or the permissible current amount of cable to be connected is less than allowable through current value, adjust the current to the smallest value. .)
Connectable up to 16 channels (The signal from up to 16th point (counting from unit adjacent to SC-MIL-S) of all units connected to SC-MIL-S is transferred. However, the signal thereafter is not transferred. Note that SC-MIL-S does not occupy any signal point.)
10 m 32.808 ft or less (the distance between SC-MIL and PLC and that between SC-MIL and SC-MIL-S put together)
–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed),
Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Enclosure: Heat-resistant ABS
Net weight: 25 g approx.
Connector protection seal: 1 pc.
EMC Directive, RoHS Directive
12 to 24 V DC ±10 %
100 mA or less
(Note:Set the maximum current passing through input / output line to 50 mA or less.)
1 input
–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed),
Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Enclosure: Heat-resistant ABS
10 g approx.
SL-CP1 (Snap male connector): 1 pc.
20 mA or less (when all indicators light up)
(Note:The current consumption and input current of the input unit connected are not included.)
PNP open-collector, open-collector, or DC 2-wire output type sensor, or switch etc.
Green LED (Lights up when the power is ON)
Green LED (1 No.) (Lights up when each channel input is ON)
Refer to the list of "Applicable unit of non-line connector"
Depends on the supply voltage from SC-MIL
100 mA or less
1 channel
–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed)
Storage: –20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Enclosure: ABS
Net weight: 4 g approx.