| | EMC Directive, RoHS Directive | 10 ± 3 mm 0.394 ± 0.118 in | 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance) | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage) | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA source current) | Incorporated | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) | - | - | - | Mark mode: 45 micro s or less Color mode: 150 micro s or less | PNP non-contact input - Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open - Input impedance: 10 kOhm approx. | 4-digit red LED display | Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching | Incorporated | Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable) | IP67 (IEC) | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil) | Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum | (Note) Mating cable is not supplied with the plug-in connector type. Please order it separately. | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 55 g approx. Gross weight: 120 g approx. | M4 (length 30 mm 1.181 in) screw with washers: 2 pcs. |
| | EMC Directive, RoHS Directive | 10 ± 3 mm 0.394 ± 0.118 in | 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance) | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage) | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 50 mA sink current) | Incorporated | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 50 mA sink current) | Incorporated | Inverted operation of the output 1 | Mark mode: 45 micro s or less Color mode: 150 micro s or less | NPN non-contact input - Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less) - Input impedance: 10 kOhm approx. | 4-digit red LED display | Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching | Incorporated | Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable) | IP67 (IEC) | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil) | Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum | 0.34 mm2 5-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 120 g approx Gross weight: 180 g approx | M4 (length 30 mm 1.181 in) screw with washers: 2 pcs. |
| | EMC Directive, RoHS Directive | 10 ± 3 mm 0.394 ± 0.118 in | 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance) | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage) | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current) | Incorporated | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) | - | - | - | Mark mode: 45 micro s or less Color mode: 150 micro s or less | NPN non-contact input - Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less) - Input impedance: 10 kOhm approx. | 4-digit red LED display | Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching | Incorporated | Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable) | IP67 (IEC) | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil) | Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum | (Note) Mating cable is not supplied with the plug-in connector type. Please order it separately. | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 55 g approx. Gross weight: 120 g approx. | M4 (length 30 mm 1.181 in) screw with washers: 2 pcs. |
| | EMC Directive, RoHS Directive | 10 ± 3 mm 0.394 ± 0.118 in | 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance) | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage) | PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 50 mA source current) | Incorporated | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) | PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 50 mA source current) | Incorporated | Inverted operation of the output 1 | Mark mode: 45 micro s or less Color mode: 150 micro s or less | PNP non-contact input - Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open - Input impedance: 10 kOhm approx. | 4-digit red LED display | Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching | Incorporated | Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable) | IP67 (IEC) | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil) | Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum | 0.34 mm2 5-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 120 g approx Gross weight: 180 g approx | M4 (length 30 mm 1.181 in) screw with washers: 2 pcs. |