Ultra-slim Safety door switch SG-A1

SG-A1 Safety Devices

Panasonic offers a large selection of Safety Devices. Switches for safety fence doors, key select Switches, emergency switches and enable grip Switches. In addition, there are two Safety Control Units available, one for general purposes and one to control Safety Light Curtains.

The SG-B1 Series and the SG-A1 Series are among the world’s thinnest Safety Door Switches. The SG-A1 Series Safety Door Switch comes with three built-in contacts.

Models table for series Ultra-slim Safety door switch SG-A1

Part No.

Datasheet

Door Monitor Contacts

Cable Length

Applicable Standards

Applicable Standards: Standards For Use

Applicable Directives

Operating Condition: Ambient Temperature

Operating Condition: Ambient Humidity

Operating Condition: Pollution Degree S

Operating Condition: Altitude

Impulse Withstand Voltage (Uimp)

Rated Insulation Voltage (Ui)

Thermal Current (Ith)

Rated Operational Voltage (Ue)/Rated Operational Current (Le)

Electric Shock Protection Class

Protection

Shock Resistance

Vibration Resistance

Operating Frequency

Actuator Operating Speed

B10D

Mechanical Durability

Electrical Durability

Direct Opening Travel

Direct Opening Force

Contact Resistance

Short-Circuit Protective Device

Conditional Short-Circuit Current

Material

Cable

Weight (Typ.)

Dummy

SG-A1-02-1

2NC

1 m 3.281 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 120 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-02-5

2NC

5 m 16.404 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 420 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-03-5

3NC

5 m 16.404 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 420 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-03-1

3NC

1 m 3.281 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 120 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-12-1

2NC+1NO

1 m 3.281 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 120 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-12-5

2NC+1NO

5 m 16.404 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 420 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

Models table for series Ultra-slim Safety door switch SG-A1

Part No.

Datasheet

Door Monitor Contacts

Cable Length

Applicable Standards

Applicable Standards: Standards For Use

Applicable Directives

Operating Condition: Ambient Temperature

Operating Condition: Ambient Humidity

Operating Condition: Pollution Degree S

Operating Condition: Altitude

Impulse Withstand Voltage (Uimp)

Rated Insulation Voltage (Ui)

Thermal Current (Ith)

Rated Operational Voltage (Ue)/Rated Operational Current (Le)

Electric Shock Protection Class

Protection

Shock Resistance

Vibration Resistance

Operating Frequency

Actuator Operating Speed

B10D

Mechanical Durability

Electrical Durability

Direct Opening Travel

Direct Opening Force

Contact Resistance

Short-Circuit Protective Device

Conditional Short-Circuit Current

Material

Cable

Weight (Typ.)

Dummy

SG-A1-02-1

2NC

1 m 3.281 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 120 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-02-5

2NC

5 m 16.404 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 420 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-03-5

3NC

5 m 16.404 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 420 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-03-1

3NC

1 m 3.281 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 120 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-12-1

2NC+1NO

1 m 3.281 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 120 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

SG-A1-12-5

2NC+1NO

5 m 16.404 ft

EN 1088, IEC 60947-5-1, EN 60947-5-1,
GS-ET-15, UL 508, CSA C22.2 No.14

IEC 60204-1, EN 60204-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +70 ℃ -13 to +158 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

4 kV

300 V

2.5 A

			Ue
			30V	125V	250V
Ie	AC	Resistive load (AC-12)	-	2.5A	1.5A
	AC	Inductive load (AC-15)	-	1.5A	0.75A
	DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
	DC	Inductive load (DC-13)	2.3A	0.55A	0.27A

Class II (IEC 61140), 回(double insulated)

IP 67 (IEC 60529)

Malfunction : 300 m/s²
Destruction : 1,000 m/s²

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in

1,200 operations/hour

0.05 to 1.0 m/sec.

2,000,000
(ISO 13849-1 Annex C Table C.1)

1,000,000 operations min. (GS-ET-15)

100,000 operations min. (AC-12, 250 V 1.5 A, DC-12 250 V 0.2 A)
1,000,000 operations min. (AC/DC 24 V 100 mA)
(1,200 operations/hour)

8 mm 0.315 in min.

60 N min.

300 mΩ max. (initial value, 1 m 3.281 ft cable)
700 mΩ max. (initial value, 5 m 16.404 ft cable)

Use 250 V / 10 A fast acting type fuse

50 A (250 V)

Enclosure : PA66

UL style 2464, No.20 AWG 6-core

Approx. 420 g

CE Marking [Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking [Machinery Regulations(2008 No.1597), RoHS Regulations]

Ultra-slim Safety door switch SG-A1

SG-A1 Safety Devices

Part Number List