Item | Performance characteristics |
---|---|
CE Marking Compliant Directives | EMC Directive, RoHS Directive |
Effective Charge Removal Width | 50 mm 1.969 in approx. |
Charge Removal Time | 0.3 sec. or less (Note 1), 0.5 sec. or less (Note 2) (Note 1: Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and air supply 60 ℓ / min. (0.3 MPa)) . (Note 2: Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.) |
Ion Balance | ±30 V or less (Note 1:Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2: Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.) |
Discharge Method | Pulse AC method (Note:The discharge frequencies of 50 Hz, 20 Hz are accepted.) |
Discharge Frequency | 50 Hz / 20 Hz |
Discharge Output Voltage | ±7,000 V approx. |
Ozone Generation | 0.01 ppm or less (Note:Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.) |
Maximum Air Pressure | 0.5 MPa |
Applicable Fluid | Air (dried clean air) (Note:The dried clean air is the air dried (dew point: equivalent of -20 ℃ -4 ℉) and filtered (mesh-size: equivalent of 0.01 μm) .) |
Operating Altitude | 2,000 m 6561.68 ft or less (Note:Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.) |
Ambient Temperature | 0 to +40 ℃ +32 to +104 ℉ (No dew condensation), Storage: -10 to +65℃ +14 to +149℉ |
Ambient Humidity | 35 to 65 % RH, Storage: 35 to 85 % RH |
Vibration Resistance | 10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
Shock Resistance | 100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each |
Enclosure Earthing | Floating |
Material | Main unit enclosure: Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS) Discharge needle: PFA, Tungsten |
Weight (Typ.) | Net weight : 370 g approx. |
Length of High-Voltage Cable | 1.2 m 3.937 ft |
Accessories | Head mounting bracket (installed at the time of factory shipment) |