Part Number List

Results 99
Models table for series TB Relays
Part No.DatasheetProtective ConstructionRated Coil VoltageCoil Resistance (at 20oC)Heat Resistance of TypesContact ArrangementContact TypeTerminal TypeOperating Function Operate (Set) Voltage (at20°C) (Initial) Release (Reset) voltage (at20°C) (Initial)Rated Operating Current [±10%] (at 20°C)Coil Resistance (At 20oC)Rated Operating Power Usable Voltage RangeContact Resistance (Initial)Contact MaterialNominal Switching Capacity (Resistive Load) Contact Data: Max. Carrying CurrentMin. Switching Load (Resistive) Insulation Resistance (Min. MΩ)(Initial)Dielectric Strength (Between Open Contacts) (Initial)Dielectric Strength (Between Contacts and Coil) (Initial)Operate (Set) Time
(At Rated Coil Voltage) (At 20oC) (Initial)
Release (Reset) Time
(at Rated Coil Voltage) (at 20°C) (Initial)
Shock Resistance: Functional Shock Resistance: DestructiveVibration Resistance: FunctionalVibration Resistance: DestructiveExpected Life: Mechanical LifeExpected Life: ElectricalConditionsWeight (Typ.)Packing QuantityInner Carton (Pieces)Outer Carton (Pieces)
Sealed
12V DC
225Ω
High heat-resistant type
1 Form A
Lamp control type
PC board type
Single side stable
Max. 7.7V DC
Min. 0.8V DC
53.3 mA
225Ω
640 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Lamp load] Min. 105 at 56 A (inrush), 8A (steady), 14 V DC,
Operating frequency: 1s ON, 14s OFF
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Approx. 5 g .176 oz
Tube
50
2,000
Sealed
12V DC
160Ω
High heat-resistant type
1 Form A
Standard type (Ag alloy / Cu clad)
PC board type
Single side stable
Max. 6.5V DC
Min. 0.8V DC
75 mA
160Ω
900 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (Without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Approx. 5 g .176 oz
Tube
50
2,000
Flux tight
12V DC
100Ω
Pin in Paste compliant type
1 Form A
Lamp control type
PC board type
Single side stable
Max. 5.5V DC
Min. 0.5V DC
120 mA
100Ω
1,440 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Lamp load] Min. 105 at 56 A (inrush), 8A (steady), 14 V DC,
Operating frequency: 1s ON, 14s OFF
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Approx. 5 g .176 oz
Tube
50
2,000
Sealed
12V DC
160Ω
Standard type
1 Form C
Standard type
PC board type
Single side stable
Max. 6.5V DC
Min. 0.8V DC
75 mA
160Ω
900 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H.
(Please avoid icing or condensation)
Approx. 5 g .176 oz
Tube
50
2,000
Sealed
12V DC
100Ω
Standard type
1 Form C
Standard type (Ag alloy / Cu clad)
PC board type
Single side stable
Max. 5.5V DC
Min. 0.5V DC
120 mA
100Ω
1,440 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (Without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H.
(Please avoid icing or condensation)
Approx. 5 g .176 oz
Tube
50
2,000
Sealed
12V DC
100Ω
High heat-resistant type
1 Form C x 2 (10 pins)
Standard type
PC board type
Single side stable
Max. 5.5V DC
Min. 0.5V DC
120 mA
100Ω
1,440 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (Without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Approx. 9.5 g .335 oz
Tube
25
1,000
Flux tight
12V DC
100Ω
Pin in Paste compliant type
1 Form C x 2 (8 pins)
Standard type (Ag alloy / Cu clad)
PC board type
Single side stable
Max. 5.5V DC
Min. 0.5V DC
120 mA
100Ω
1,440 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (Without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Approx. 9.5 g .335 oz
Tube
25
1,000
Sealed
12V DC
160Ω
High heat-resistant type
1 Form C
Standard type (Ag alloy / Cu clad)
PC board type
Single side stable
Max. 6.5V DC
Min. 0.8V DC
75 mA
160Ω
900 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (Without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Approx. 5 g .176 oz
Tube
50
2,000
Sealed
12V DC
160Ω
High heat-resistant type
1 Form C
Lamp control type
PC board type
Single side stable
Max. 6.5V DC
Min. 0.8V DC
75 mA
160Ω
900 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Lamp load] Min. 105 at 56 A (inrush), 8A (steady), 14 V DC,
Operating frequency: 1s ON, 14s OFF
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Approx. 5 g .176 oz
Tube
50
2,000
Flux tight
12V DC
160Ω
Pin in Paste compliant type
1 Form A
Standard type
PC board type
Single side stable
Max. 6.5V DC
Min. 0.8V DC
75 mA
160Ω
900 mW
10 to 16V DC
Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (Without contact bounce time) (Without diode)
Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Approx. 5 g .176 oz
Tube
50
2,000