TL Series

Panasonic's TL Series Automotive Relays 2 Form A offers a high load for smart J/B. The TL Series Automotive Relays have a miniature design while still being capable of switching larger capacity loads and uses a double make 1 Form U (or 2 Form A) contact arrangement. The double-make structure allows for switching capabilities of 40A. The TL Series also offers pin-in paste compliant options.

Features and Benefits:

Automotive Grade Relay Design
Small Compact Design For Space Savings
High Switching And Carry Current Capability For DC Loads
- Can Meet All Resistive Switching At 14 VDC And Carry Loads Up To 40A Continuous Current
Capable Of Withstanding Automatic Reflow Soldering And Has A Wide Operating Ambient Temperature Rating Of -40°C to +110°C
- Pin In Paste Compatible With High Heat Resistance
High Inrush Capability
- Can Handle 70A Capacitive Loads
RoHS/REACH Compliant

TL Series

Part number list

Results 5

Models table for series TL Series
Part No.	Rated Coil Voltage	Coil Resistance (at 20oC)	Heat Resistance of Types	Contact Arrangement	Contact Type	Protective Construction	Terminal Type	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20℃) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power (at 20°C)	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTL3CR3V	12V DC	225 Ω	Pin in Paste compliant type	Double make contact 2 Form A (1 Form U)	Standard type (Ag alloy / Cu clad)	Flux tight	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Resistive and capacitor loads] Min. 10⁵: at 90 A (Inrush), 20 A (Steady), 14 V DC Operating frequency: 0.15s ON, 4.85s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000
ACTL3DH3	12V DC	225 Ω	High heat-resistant type	Double make contact 2 Form A (1 Form U)	Lamp control type (Ag alloy / Cu clad)	Sealed	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Lamp load] Min. 10⁵: at 90 A (Inrush), 12 A (Steady), 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000
ACTL3CR3	12V DC	225 Ω	Pin in Paste compliant type	Double make contact 2 Form A (1 Form U)	Standard type (Ag alloy / Cu clad)	Flux tight	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Resistive and capacitor loads] Min. 10⁵: at 90 A (Inrush), 20 A (Steady), 14 V DC Operating frequency: 0.15s ON, 4.85s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000
ACTL3DR3	12V DC	225 Ω	Pin in Paste compliant type	Double make contact 2 Form A (1 Form U)	Lamp control type (Ag alloy / Cu clad)	Flux tight	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Lamp load] Min. 10⁵: at 90 A (Inrush), 12 A (Steady), 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000
ACTL3CH3	12V DC	225 Ω	High heat-resistant type	Double make contact 2 Form A (1 Form U)	Standard type (Ag alloy / Cu clad)	Sealed	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Resistive and capacitor loads] Min. 10⁵: at 90 A (Inrush), 20 A (Steady), 14 V DC Operating frequency: 0.15s ON, 4.85s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000

Models table for series TL Series
Part No.	Rated Coil Voltage	Coil Resistance (at 20oC)	Heat Resistance of Types	Contact Arrangement	Contact Type	Protective Construction	Terminal Type	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20℃) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power (at 20°C)	Usable Voltage Range	Contact Resistance (Initial)	Contact Material	Nominal Switching Capacity (Resistive Load)	Contact Data: Max. Carrying Current	Min. Switching Load (Resistive)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical	Conditions	Weight (Typ.)	Inner Carton (Pieces)	Outer Carton (Pieces)
ACTL3CR3V	12V DC	225 Ω	Pin in Paste compliant type	Double make contact 2 Form A (1 Form U)	Standard type (Ag alloy / Cu clad)	Flux tight	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Resistive and capacitor loads] Min. 10⁵: at 90 A (Inrush), 20 A (Steady), 14 V DC Operating frequency: 0.15s ON, 4.85s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000
ACTL3DH3	12V DC	225 Ω	High heat-resistant type	Double make contact 2 Form A (1 Form U)	Lamp control type (Ag alloy / Cu clad)	Sealed	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Lamp load] Min. 10⁵: at 90 A (Inrush), 12 A (Steady), 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000
ACTL3CR3	12V DC	225 Ω	Pin in Paste compliant type	Double make contact 2 Form A (1 Form U)	Standard type (Ag alloy / Cu clad)	Flux tight	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Resistive and capacitor loads] Min. 10⁵: at 90 A (Inrush), 20 A (Steady), 14 V DC Operating frequency: 0.15s ON, 4.85s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000
ACTL3DR3	12V DC	225 Ω	Pin in Paste compliant type	Double make contact 2 Form A (1 Form U)	Lamp control type (Ag alloy / Cu clad)	Flux tight	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Lamp load] Min. 10⁵: at 90 A (Inrush), 12 A (Steady), 14 V DC Operating frequency: 1s ON, 14s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000
ACTL3CH3	12V DC	225 Ω	High heat-resistant type	Double make contact 2 Form A (1 Form U)	Standard type (Ag alloy / Cu clad)	Sealed	PC board type	Single side stable	Max. 6.5 V DC	Min. 0.5 V DC	53.3 mA	225 Ω	640 mW	10 to 16V DC	Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)	Ag alloy	40A 14V DC	40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)	1A 14V DC (at 20°C 68°F)	Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)	500 Vrms for 1min. (Detection current: 10mA.)	500 Vrms for 1min. (Detection current: 10mA.)	Max. 10ms (without contact bounce time)	Max. 10ms (without contact bounce time) (Without diode)	Min. 100 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)	Min. 1,000 m/s² (Half-wave pulse of sine wave: 6 ms)	10 to 100 Hz, Min. 44.1m/s² (Detection time: 10µs)	10 to 500 Hz, Min. 44.1m/s² Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours	Min. 5 x 10⁶ (at 120 cpm)	[Resistive load] Min. 10⁵ at rated switching capacity Operating frequency: 1s ON, 9s OFF [Resistive and capacitor loads] Min. 10⁵: at 90 A (Inrush), 20 A (Steady), 14 V DC Operating frequency: 0.15s ON, 4.85s OFF	Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation)	approx. 6.5g .23 oz	50	2,000

Automotive Relays Available Through Panasonic Franchised Distributors

ACTL3CR3V Automotive Relay

The ACTL3CR3V is the only part number available for purchase in the Panasonic Automotive Relays TL Series through franchised distributors.

The TL Series ACTL3CR3V Automotive Relay has a miniature design while still being capable of switching larger capacity loads. This Relay uses a double make 1 Form U (or 2 Form A) contact arrangement. The double-make structure allows for switching capabilities of 40A @ 14VDC (40A continuous energization with make-fixed contacts connected). The ACTL3CR3V part can be used to replace micro some ISO Terminal Type Relays and is designed for use within a dedicated 12VDC power supply system.

The TL Series ACTL3CR3V part is manufactured in Vietnam.

Learn More About Automotive Relays Available Through Panasonic Franchised Distributors