Specification

Specifications table for model ACTB1LH3
ItemPerformance characteristics
Protective ConstructionSealed
Rated Coil Voltage12V DC
Coil Resistance (at 20oC)225Ω
Heat Resistance of TypesHigh heat-resistant type
Contact Arrangement1 Form A
Contact TypeLamp control type
Terminal TypePC board type
Operating Function Single side stable
Operate (Set) Voltage (at20°C) (Initial) Max. 7.7V DC
Release (Reset) voltage (at20°C) (Initial)Min. 0.8V DC
Rated Operating Current [±10%] (at 20°C)53.3 mA
Coil Resistance (At 20oC)225Ω
Rated Operating Power 640 mW
Usable Voltage Range10 to 16V DC
Contact Resistance (Initial)Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Contact MaterialAg alloy
Nominal Switching Capacity (Resistive Load) N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
Contact Data: Max. Carrying Current25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
Min. Switching Load (Resistive) 1A 14V DC (at 20°C 68°F)
Insulation Resistance (Min. MΩ)(Initial)Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Dielectric Strength (Between Open Contacts) (Initial)500 Vrms for 1 min. (Detection current: 10mA)
Dielectric Strength (Between Contacts and Coil) (Initial)500 Vrms for 1 min. (Detection current: 10mA)
Operate (Set) Time
(At Rated Coil Voltage) (At 20oC) (Initial)
Max. 10ms (without contact bounce time)
Release (Reset) Time
(at Rated Coil Voltage) (at 20°C) (Initial)
Max. 10ms (Without contact bounce time) (Without diode)
Shock Resistance: Functional Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Shock Resistance: DestructiveMin. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
Vibration Resistance: Functional10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs)
Vibration Resistance: Destructive10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Expected Life: Mechanical LifeMin. 107 (at 120 cpm)
Expected Life: Electrical[Lamp load] Min. 105 at 56 A (inrush), 8A (steady), 14 V DC,
Operating frequency: 1s ON, 14s OFF
ConditionsAmbient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Weight (Typ.)Approx. 5 g .176 oz
Packing QuantityTube
Inner Carton (Pieces)50
Outer Carton (Pieces) 2,000

Stock Check

Stock check for product ACTB1LH3
DistributorQuantityInventory Date
No stock found

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.