| | Flux tight | Pin in Paste compliant type | 1 Form A | Lamp control type | PC board type | Single side stable | 12V DC | Max. 7.0 V DC | Min. 0.5 V DC | 40 mA | 300 Ω | 480 mW | 10 to 16V DC | Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC) | Ag alloy | 30A 14V DC | 30 A for 1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11 ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6 ms) | 10 to 100 Hz, Min. 44.1m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2 [approx. 4.5G] Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 5 x 106 (at 120cpm) | [Resistive and capacitor loads] Min. 105: at 70 A (Inrush), 15 A (Steady), 14 V DC Operating frequency: 0.15s ON, 4.85s OFF | Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | approx. 5g .176 oz | 50 | 2,000 |
| | Sealed | High heat-resistant type | 1 Form A | Lamp control type | PC board type | Single side stable | 12V DC | Max. 7.0 V DC | Min. 0.5 V DC | 40 mA | 300 Ω | 480 mW | 10 to 16V DC | Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC) | Ag alloy | 30A 14V DC | 30 A for 1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11 ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6 ms) | 10 to 100 Hz, Min. 44.1m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2 [approx. 4.5G] Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 5 x 106 (at 120cpm) | [Resistive and capacitor loads] Min. 105: at 70 A (Inrush), 15 A (Steady), 14 V DC Operating frequency: 0.15s ON, 4.85s OFF | Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | approx. 5g .176 oz | 50 | 2,000 |
| | Flux tight | Pin in Paste compliant type | 1 Form A | Standard type | PC board type | Single side stable | 12V DC | Max. 7.0 V DC | Min. 0.5 V DC | 40 mA | 300 Ω | 480 mW | 10 to 16V DC | Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC) | Ag alloy | 30A 14V DC | 30 A for 1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11 ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6 ms) | 10 to 100 Hz, Min. 44.1m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2 [approx. 4.5G] Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 5 x 106 (at 120cpm) | [Resistive load] Min. 105 at rated switching capacity Operating frequency: 1s ON, 9s OFF | Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | approx. 5g .176 oz | 50 | 2,000 |
| | Flux tight | Pin in Paste compliant type | 1 Form A | Lamp control type | PC board type | Single side stable | 12V DC | Max. 7.0 V DC | Min. 0.5 V DC | 40 mA | 300 Ω | 480 mW | 10 to 16V DC | Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC) | Ag alloy | 30A 14V DC | 30 A for 1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11 ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6 ms) | 10 to 100 Hz, Min. 44.1m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2 [approx. 4.5G] Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 5 x 106 (at 120cpm) | [Resistive and capacitor loads] Min. 105: at 70 A (Inrush), 15 A (Steady), 14 V DC Operating frequency: 0.15s ON, 4.85s OFF | Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | approx. 5g .176 oz | 50 | 2,000 |
| | Sealed | High heat-resistant type | 1 Form A | Standard type | PC board type | Single side stable | 12V DC | Max. 7.0 V DC | Min. 0.5 V DC | 40 mA | 300 Ω | 480 mW | 10 to 16V DC | Max. 50mΩ (typ. 3mΩ) (By voltage drop 1A 6V DC) | Ag alloy | 30A 14V DC | 30 A for 1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial) | 1A 14V DC (at 20°C 68°F) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) | 500 Vrms for 1 min. (Detection current: 10mA) | 500 Vrms for 1 min. (Detection current: 10mA) | Max. 10ms (without contact bounce time) | Max. 10ms (without contact bounce time) (Without diode) | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11 ms; detection time: 10µs) | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6 ms) | 10 to 100 Hz, Min. 44.1m/s2 [approx. 4.5G] (Detection time: 10µs) | 10 to 500 Hz, Min. 44.1m/s2 [approx. 4.5G] Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours | Min. 5 x 106 (at 120cpm) | [Resistive load] Min. 105 at rated switching capacity Operating frequency: 1s ON, 9s OFF | Ambient temperature: –40 to +110°C –40 to +230°F Humidity: 2 to 85% R.H. (Please avoid icing or condensation) | approx. 5g .176 oz | 50 | 2,000 |